Ultimate Overview of the Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets Video

Hey Alexandria! Bike racks rated for travel trailers are pretty limited. There is quite a bit of additional force back there. This also means there are no 1-1/4" bike racks that will work. I have two different options for you. The first is to…

Since it looks like you have C-channel on your 2021 Winnebago Micro Minnie FBS Comfort Explorer you'd have to find a welder to box the frame so that you can then install the Mount-n-Lock SafetyStruts #MO22FR that you referenced but it can fit.

Yes, the TorkLift Lock and Load SideKick #TLA7901 that you referenced will fit a Honda 2200 generator like you mentioned. We had the chance to fit one on this carrier and it worked well. See attached picture. It's also in the review video for…

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…

Hey Matthew, the 24x40 etrailer Cargo Carrier for RV Bumper #e99050 that you referenced has a 500 lb capacity so it would easily handle the weight of a 220 lb generator. It would probably be a good idea to get the support brackets part #MO22FR but…

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

The TorkLift Lock and Load SideKick Cargo Tray, part #TLA7901, can carry any generator that fits on it. The generator needs to have a center handle and be no more than 16 inches wide and 21-1/4 inches long. For the height there are three different…

The standoff tab on the Brophy Rigid Mount Spare Tire Carrier part #BR56VR is about 5" so as long as the width of the tire does not exceed 10" (0 offset wheel) you should be able to mount the wheel either way. If the width of the tire…

Hey Danny, what you would want is the ShakeStopper Heavy Duty 2 inch hitch part #MNT72VR which has a 400 lb tongue weight capacity and was designed with heavier bike racks in mind. The hitch you mentioned only has a 100 lb capacity so it would not be…

As Lance did not position the spare tire on the rear bumper I would say it is not strong enough to support any additional weight. We do have the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which is rated for up to 500lbs and includes…

The seal for your Dexter 4,400 lb axle is part #58846 which we also have in a pack of 2 listed as part #RG06-050 these have an inner diameter of 1.719" and an outer diameter of 2.565".

The 24x27 TorkLift Lock and Load Maximum Security Cargo Tray #TLA7752 that you referenced is rated for the rougher ride quality that is present at the rear of travel trailers like yours which is a bit rougher like you noticed. I attached a picture of…