2013 Ram 1500 Headache Rack

Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…

Hey Brian! For 7-way wiring to go with your Curt #C15325 the best option is the #20023. This is only a 7-way so you can either use an adapter like #PK12716 or swap out the connector for one that fits a USCAR connection like the Curt Dual Connection…

Hello Levan, thanks for reaching out. Yes, the Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY57ND is made to replace the Lippert 1621 pin box so the bolt hole spacing and dimensions are the same. Your cab and tailgate clearance will be…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hi William! For the best sliding hitches that will fit that puck system in your 2023 GMC Sierra 3500 short bed, you are going to want to check out the following two American made options: B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC…

Hey George, the Westin HDX grille guard part #W45PF will block your sensors on the front of your 2025 Ford F-150 but it would not block a front facing camera if you had one.

Hey Tony, congrats on the new truck. Since your 2025 Ford F-150 has the PowerBoost engine and the B&W gooseneck item #BW77FR installed your options are extremely limited. So long as your truck does not have the Continuously Controlled Damping…

Hi Brandon! For the Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles - 30-1/2" Long #DX45QR, you will want the Bronze Spring Eye Bushing, 3/4" x 1" x 2-1/2" #14-67. This is a direct replacement for what came in…

Hi Jim; for your 2025 Ford F-350 I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BW73FR. The Turnoverball allows you to store the hitch ball upside down when not in use for full bed access. It also uses a square base so it…

Hey Ryan, the Curt CrossWing Lightweight 5th Wheel Trailer Hitch part #C86JR is compatible with the Adapter Rails for Curt 5th Wheel Hitch part #C88KR. The fifth wheel hitch simply drops into the adapter and secures with hitch pins and then the…

Bruce, the Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles #DX65QR is not the same as the Dexter 072-080-01, so yes the specs are correct. The spring you're referencing is the Dexter 5-Leaf Slipper Spring w/ Flat End for…

The B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights is only available is white part #BWPUCP7520WA or black part #BWPUCP7520BA. B&W does not produce this ladder rack with a chrome or stainless finish.