bing tracking image
Q & A Icon

Replacement Mounting Hardware for C11265 Hitch  

Updated 09/21/2026 | Published 09/17/2026

Question:

Hi, I have a CURT C11265 trailer hitch for a 2003 Toyota Corolla, but I’m missing the mounting hardware. I found an older eTrailer answer stating that this hitch uses M12 x 1.25 x 35 mm Class 8.8 bolts with conical toothed washers. However, I’ve also seen installation videos where the bolts appear to be marked 10.9. Could you please confirm what bolt class and length originally came with the CURT C11265, and whether the RHK replacement hardware kit will include the same hardware as originally supplied by CURT? Thank you!

0

Expert Reply:

Thanks for letting us help Arturo. The mounting hardware originally included with the Curt Trailer Hitch Receiver # C11265 uses M12-1.25 x 30 mm, Class 10.9 bolts. I took a trip down to our warehouse to check the bolts and confirm the grade. Class 10.9 is a metric bolt rating and is comparable to a SAE Grade 8 bolt.

The important thing here is that if you order the Replacement Hardware Kit # RHK for the # C11265, you'll receive hardware that matches what Curt originally supplied with the hitch. That would include (4) M12-1.25 x 30 mm Class 10.9 bolts and (4) 1/2" conical-toothed washers.

Did you pick up the hitch used without the original hardware, or are you reinstalling a hitch that was previously removed from your vehicle? What are you planning to carry?

expert reply by:
0
Christopher H
C11265 Installation Instructions
C11265 Installation Instructions
(click to enlarge)
Arturo profile picture

Arturo

9/21/2026

Hi Christopher, Thank you very much for checking the bolts in the warehouse and confirming the specifications. I really appreciate it. I purchased the CURT C11265 hitch used, and it did not include the original mounting hardware, so I ordered the RHK replacement hardware kit. I’m planning to use the hitch only for a bike rack, carrying a maximum of two bicycles. I also already purchased the CURT 18050 stabilizing strap for the bike rack. Thanks again for your help! Best regards, Arturo

Christopher H. profile picture
Etrailer Expert

Christopher H.

9/21/2026

@Arturo No problem at all! Great call on the # 18050. A lot of folks don't catch that when using a 1-1/4" receiver. It sounds like you're all set. Let us know if you need anything else.

Expert Reply:

Thanks for letting us help Arturo. The mounting hardware originally included with the Curt Trailer Hitch Receiver # C11265 uses M12-1.25 x 30 mm, Class 10.9 bolts. I took a trip down to our warehouse to check the bolts and confirm the grade. Class 10.9 is a metric bolt rating and is comparable to a SAE Grade 8 bolt.

The important thing here is that if you order the Replacement Hardware Kit # RHK for the # C11265, you'll receive hardware that matches what Curt originally supplied with the hitch. That would include (4) M12-1.25 x 30 mm Class 10.9 bolts and (4) 1/2" conical-toothed washers.

Did you pick up the hitch used without the original hardware, or are you reinstalling a hitch that was previously removed from your vehicle? What are you planning to carry?

expert reply by:
0
Christopher H

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>