Solar Charge Controllers - MPPT, Remote Display

...Which remote screens are compatible with the GP32QR controller...

Great question, Sonia. Yes, the #GP85QR charger can be configured for lithium, AGM, or flooded lead-acid, and you can adjust those settings through the remote or the app. Once set, the inverter remembers the profile, even if you disconnect the…

Hey Brad! I just went over this with Dometic/Go Power and you will need several wiring harnesses in addition to the #GP74XR you already picked up. To connect the Go Power PowerTrak Screen #GP64XR, Pure Sine Wave Inverter Charger #GP85QR, and MPPT…

Yes, Marsha, that’s exactly what the #GP85QR is built for. Unlike the single-leg 30A #GP44XR, this one outputs on both legs, so it ties directly into a 50A distribution panel and supplies up to 3,000 W (not going to power the entire AC system of…

Steve, for the #GP44XR (along with other models like the #GP85QR and #GP94XR) you’ll want at least 4" of open space on all sides, especially around the fan vents. These units can move a lot of air under load. Mounting it in a ventilated…

Hey Robert, The Go Power Solar Charge Controller #GP32QR doesn't have a hand held remote, but it does have a touch screen mount #GP64XR that will allow you to control it. Which comes with Bluetooth capability so you would be able to control it…

Hey Robert, yes any appropriate gauge wire would work spliced in as long as it's not speaker wire.

Yes, the Roadmaster LubeMaster Dry Silicone Spray #RM-747 will also work great for your awning.

Hello Ernest; the Go Power Pure Sine Wave Inverter Charger #GP85QR can be mounted horizontally with the base down or up. It can also be wall mounted with the terminals facing left or right. You cannot mount it on the wall vertically. See the attached…

We have just what you're needing! To parallel multiple of the Go Power! MPPT Controllers #GP72RR together you'll just need to get the parallel cord #GP89QR.

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

Laura, yes, Go Power added app monitoring to the new inverters like 1,800w 30A #GP94XR, 3,000w 30A #GP44XR, and 3000w 50A #GP85QR. Once it’s wired in, you can pull up real-time battery voltage, load levels, and error codes on your phone. It’s a nice…

...Which remote screens are compatible with the GP32QR controller...

Great question, Sonia. Yes, the #GP85QR charger can be configured for lithium, AGM, or flooded lead-acid, and you can adjust those settings through the remote or the app. Once set, the inverter remembers the profile, even if you disconnect the…

Hey Brad! I just went over this with Dometic/Go Power and you will need several wiring harnesses in addition to the #GP74XR you already picked up. To connect the Go Power PowerTrak Screen #GP64XR, Pure Sine Wave Inverter Charger #GP85QR, and MPPT…

Yes, Marsha, that’s exactly what the #GP85QR is built for. Unlike the single-leg 30A #GP44XR, this one outputs on both legs, so it ties directly into a 50A distribution panel and supplies up to 3,000 W (not going to power the entire AC system of…

Steve, for the #GP44XR (along with other models like the #GP85QR and #GP94XR) you’ll want at least 4" of open space on all sides, especially around the fan vents. These units can move a lot of air under load. Mounting it in a ventilated…

Hey Robert, The Go Power Solar Charge Controller #GP32QR doesn't have a hand held remote, but it does have a touch screen mount #GP64XR that will allow you to control it. Which comes with Bluetooth capability so you would be able to control it…

Hey Robert, yes any appropriate gauge wire would work spliced in as long as it's not speaker wire.

Yes, the Roadmaster LubeMaster Dry Silicone Spray #RM-747 will also work great for your awning.

Hello Ernest; the Go Power Pure Sine Wave Inverter Charger #GP85QR can be mounted horizontally with the base down or up. It can also be wall mounted with the terminals facing left or right. You cannot mount it on the wall vertically. See the attached…

We have just what you're needing! To parallel multiple of the Go Power! MPPT Controllers #GP72RR together you'll just need to get the parallel cord #GP89QR.

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

Laura, yes, Go Power added app monitoring to the new inverters like 1,800w 30A #GP94XR, 3,000w 30A #GP44XR, and 3000w 50A #GP85QR. Once it’s wired in, you can pull up real-time battery voltage, load levels, and error codes on your phone. It’s a nice…