Victron SmartSolar 450/200-MC4 MPPT RS Solar Charge Controller - 48V - 200 Amp

Victron Solar Charge Controllers - VN52ZR

This MPPT RS solar charge controller is designed for high voltage PV arrays charging 48V battery banks. With ultra-fast tracking, wide input voltage support, and full connectivity, it delivers efficient charging for large on and off grid systems.

Features:

• MPPT RS solar charge controller designed for large series connected PV arrays charging 48 V DC battery banks in on grid and off grid systems
• Ultra-fast Maximum Power Point Tracking that efficiently charges 48 V batteries from PV arrays operating between 65 and 450 VDC
  • Available with 100 A or 200 A output depending on model
  • Fully programmable charge settings for different battery chemistries
• Multiple independent MPPT tracking inputs that allow flexible solar array design and optimized performance for different panel orientations
• Wide MPPT operating voltage range from 65 to 450 VDC with a 120 VDC startup voltage for high voltage PV systems
• Isolated PV connections providing full galvanic isolation between PV and battery connections for additional system safety
• Built in display that shows battery voltage, charge current, individual PV array data, system status, and error codes
• Bluetooth connectivity and VictronConnect app support for setup, configuration, and monitoring of system performance and historical data
• VE.Can bus connectivity that allows daisy chaining of multiple MPPT RS and VE.Can MPPT units with synchronized charge stages
  • Supports data sharing and monitoring through a GX device
• Remote monitoring and control through the VRM portal when connected to a GX device and the internet
  • Optional GlobalLink 520 support for remote installations without local internet
• Programmable I/O connections including a relay and support for remote temperature and voltage sensing
• Remote input compatibility with Victron smallBMS and other BMS devices using allow to charge signals
• Lightweight and quiet design using high frequency technology with low standby power and active cooling
• PV isolation resistance monitoring that continuously checks for unsafe insulation faults at higher PV voltages
• VE.Can and VE.Direct ports for system monitoring, data logging, firmware updates, and parallel operation of up to 25 units

Specs:

• Charger:
  • Battery voltage: 48V
  • Rated charge current: 200 amps
  • Maximum charge power: 11.5 kW at 57.6V
  • Programmable voltage range: 36V - 60V
  • Maximum efficiency: 96 percent
• Solar:
  • Maximum DC PV voltage: 450V
  • Start-up voltage: 120V
  • MPPT operating voltage range: 65 - 450V
  • Number of trackers: 4
  • Maximum DC output charging power: 4,000 watts per tracker
• Dimensions: 19-3/16" tall x 17-1/16" wide x 5-3/4" deep
• Operating temperature: -40 to 140 degrees F (-40 to 60 degrees C)
• Protection category: IP21
• Battery connection: 4x M8 bolts, 2x positive and 2x negative
• Material: steel
• Weight: 30.2 lbs
• 5-Year warranty

SCC145120510 Victron Energy Smart Solar MPPT RS Solar Controller - 450/200-MC4 - 200 Amp

Installation Details