When your solar setup grows past one controller or pushes series voltage limits, this MPPT unit steps in with 150V PV input headroom and 85 amp output. It keeps larger arrays charging in step without forcing a full system redesign.
Array expansion often stalls when voltage limits get too tight, especially with series wiring. This controller accepts up to 150V PV open circuit input, giving you room to run longer series strings without immediately hitting a ceiling. That headroom keeps expansion options open and reduces the chance of redesigning your array just to stay within limits.
Once one controller becomes the bottleneck, expanding the system can turn into a wiring and coordination mess. VE.Can connectivity supports multi controller systems and synchronized charging, and it can daisy chain up to 25 MPPT controllers for coordinated operation. You can grow the system in stages while keeping charge behavior aligned across the whole array.
Shading and changing light can drag production down when a controller reacts too slowly or locks onto the wrong point. This unit uses ultra-fast Maximum Power Point Tracking with an advanced Maximum Power Point Detection algorithm that locks onto the optimal power point when multiple peaks occur due to partial shading. You get steadier charging instead of watching output fall off when roof conditions are less than perfect.
Switching battery types can force a controller swap if charge profiles do not match. This unit supports lithium, AGM, gel, and flooded batteries with automatic voltage selection, dedicated charging profiles, and 8 pre-programmed charge profiles. You can reconfigure charging behavior as your battery setup changes without replacing the controller or compromising battery health.
Limited feedback makes it hard to tell if charging is normal or if settings need attention. Built-in Bluetooth Smart supports wireless setup, monitoring, updates, and charging synchronization, and VRM remote monitoring works when paired with a communication center (sold separately). You can check performance, change settings, and track system behavior without climbing back into the install every time.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steven here with etrailer. Today we're talking about the Victron Energy SmartSolar MPPT, a 150/85 TR VE.Can. That's right, folks. This is a high performance solar charge controller that's gonna help you get the most energy out of those solar panels. Now this advanced MPPT controller, it uses ultra fast tracking technology to help maximize the power harvested from your solar array and then adapt quickly to the change in sunlight or even partial shade.
So that just means you're gonna have more efficient charging, more energy stored for your battery system and your battery. As you can see, you have all your hookups and everything here. This is rated for up to 85 amps of charging current with 150 volt maximum PV input. And it's built to handle large solar systems on RVs, boats, off-grid homes or commercial installations. So it's going to automatically detect your system voltage.
So whether you're running 12, 24, 36 volts with software or 48 volt batteries, this is gonna do everything automatically, which makes it safer and less stress and hassle for you to worry about. And to me, what sets this controller apart is its VE.Can interface, which allows you to integrate it into a larger Victron system and even run multiple controllers in parallel, giving you scalable future and scalable installations when you need 'em. Now, the monitoring and the configuration are super easy as well because it has a built-in Bluetooth capability and you can use that with the free Victron Connect app, and I highly recommend you download that, take a look at it, and use all the features that come with that app. It's really helpful. And with over 98% efficiency, this robust electronic protection and the adaptive charge algorithms inside are designed to protect and extend your battery life.
So this has been a top choice for high performance and reliability for ages. Whether you're upgrading your current solar setup or building a new one from scratch, this controller by Victron can give you a clean, smart charging and a better overall energy harvest from those panels. Folks, that is gonna wrap up our quick look together. I'm Steven with etrailer. As always, reach out to us if you need assistance with any questions about this product or anything else.
And if you don't wanna tackle the installation, if it's way over your head, just reach out to us. We also use a dealer locator tool at etrailer.com. We can pair you up with somebody reliable in your area as well. Thanks for watching and have a good one.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.