Replace 1 worn or damaged ball-and-socket gas strut from your boat's hatch lid or compartment door. Annealed steel with corrosion-resistant coating is great for saltwater environments. Strut measures 17" long and offers 40 lbs of force.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey, everyone. I'm Ellen here at etrailer.com. We're going to be taking a look at the Gas Strut. This is going to be for really any kind of application where you would need a replacement for your gas strut. Maybe it's broken, bent, damaged, or it's just worn down and not working properly. This can have a lot of applications for boats, marine applications, or also on your RV, or other automotive applications as well.
This is a 17 inch long gas strut, and it has a 40 pound compression rating. It should be able to lift up to 40 pounds of pressure to hold that door open, so you can load in your gear, do any kind of maintenance that you need to do without that door opening or lid crashing down on you, and bonking you in the head, or causing other issues and injury.We can take a little closer look at our gas strut. This is going to be it's expanded length, which we get that length from measuring from the center of each of the attachment points, and that's where we get that 17 inches from. The attachment points are both going to be a 10 millimeter ball socket. Again, the compression force for this is 40 pounds.
You do have a little bit of adjustment, as far as the length, just slightly with this end. It is threaded, so you can run that out or in. It also allows you to change the angle between those two sockets, so you can get that dialed in where you need it to be. It's made out of a heat-treated steel construction, so nice and durable. It also has a corrosion resistant coating, so it won't rust.
Makes it great for even saltwater applications. Also, on our RV, a lot of times we encounter salt on the road, so it's going to be protected from all those elements.That's about all there is to it for our look at the Replacement Gas Strut. I hope this video has been helpful. If you need a different size or a different compression rating we do have other options available here at etrailer.com, so check them out. Thanks for watching.
We'll see you next time.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
Great fit. Perfect replacement strut for a Chaparral SS rear bench seat engine cover/sunpad.
Perfect replacement
Needed to replace several boat hatch struts on a 2008 cruiser. etrailer had the right parts and the phone support to help me sort my older boat. Well done.
Worked well to replace cabin door hatch lid strut on a 2005 Hydra Sports 212 WA. Had to move the top mount back about 3/4" to allow the lid to close completely, but when the original part is no longer available, this is the way to go.
I used them to make a lift system for a pontoon rear lid. I rebuiilt a 1988 pontoon. The Gas Struts make it much eaiser!!!
Did a bit of research on how to install these shocks via [online video] and ordered this product and installed in my rod lockers. Great products all around, was offered support but did not need it (got lucky). I need to fish more but so far so awesome.
2008 Grady White boat needed a new hatch lift. Boat manufacturers are not like automobile manufacturers, and many times the customer is on his own to find older parts. This was a perfect fit for the worn out gas strut. Even thought the force was 10 pounds lighter than the original part, it works fine. I was most pleased as the size and connectors fitted perfectly to effect a quick sure fix.
Replaced a hatch strut on a 2015 Stingray. Exact match and perfect fit.
These struts worked phenomenal. I should have added them to our food trailer years ago. We retrofitted a 1972 Shasta Go Tag Along trailer and used real pine wood for a nice warm look. The side windows we cut into her were made of 2x4, plywood and pine wood. They were extremely heave and difficult to open. The struts were added and now they slowly open with by themselves. They are easy to close and only take one hand. Should have added them years ago!!
Exact match for a compartment door on a 2016 Unity Leisure Travel van. Speedy shipping as well.
This gas strut for our boat hatch works perfectly. I received this faster than I thought I would and it was very well packaged. I have ordered things before from etrailer and have always had great results and service! I'm sure there will be other things I will need down the road for our boat...after all...you know what BOAT stands for don't you? It stands for "Bring Out Another Thousand"! :) When it comes to anything else I need....this IS the company I will order from.
Thank you etrailer for your service.
Comparing this to the usual steel gas strut is like day and night. Seems well made, and looks great. More important is my review if etrailer. When my order did not arrive, I sent them email. Shortly, I was notified that it was being tracked. When tracking did not find it, I emailed etrailer again. They expedited delivery of a replacement.
perfect for my toolbox lid.
The struts work great on my motorhome. Customer service was very good when I bought the wrong ones the first time! Thanks etrailer
They were returned due to the wrong size ball mounts. Customer service was nothing short of excellent.
Just what I needed
These worked well for my project. I was putting a concession stand style hatch in the basement wall that separates our play area from the living area. It took some research and a few tries to get them installed at the correct angle. I wanted the hatch to almost, but not quite touch the ceiling.
Worked great on our boat hatch. Always a great experience using etrailer.com when purchasing items for our truck and boat.
Shock worked great on my Ranger bass boat.
I would like to thank Abigail J. for her excellent and timely customer service.
Well made and can withstand wind gust that are not real strong
This is how the strut was delivered?????
Well will see how it works.
I'm hoping this does the trick.Had 30 lb on before went to 40 lb on boat hatch.Installed perfect and seems to work better .Different brand but seems exactly the same install.So will see how it works out if it does I will be ordering another.Came fast and in perfect shape.Thank you!
As always, etrailer delivers a great customer experience. In this case, not only worth a fastest, but in this case they were the only supplier I could find for this particular product, which is usually European.
They always get me my stuff quickly, and I use their website websites videos constantly to purchase and install travel related items. They are welcome discovery in my life.
Would of given a 5 instead of a 4, but part of my last order wasnt sent so I had to call and get sent. They were real nice, and I will buy from them again and a 4 out of 5 in my book is still a great rating, better than most.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.