E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…
The CargoSmart Folding Workbench #3481744 will sit approximately 3-3/4 to 4" out from the CargoSmart X-track mount #3481770. The braces on the CargoSmart Folding Workbench are 2-1/2" tall and the bracket that mounts in the X track is sits…
Kevin, that’s exactly what these PingMaster trailer trackers are built for. All three models - the PingMaster 3000 w/ WiFi Backup #PM84FR and both PingMaster 5000 versions #PM64FR and #PM74FR - use motion-sensing alerts that notify you the moment the…
Hey Dave, thanks for reaching out! The Erickson Round D-Ring Tie-Down Anchor #EM59110 has a capacity of 1,200 lbs and is not going to be strong enough to cinch down your Polaris RZR securely. You need the CargoSmart Anti-Rattle D-Ring Tie-Down Anchor…
Since you have wooden floors in your trailer the hardware I would recommend for installing e-track like the part #EM19147 would be the Erickson Hardware kit part #SL49FR which is basically wood screws.
Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…
Hey Dustin. I installed the Enclosed Trailer Transition Plate item #M368FR on a trailer here when we first got them in and you're good! That plate is single solid piece of steel. It's got a heavy duty piano style hinge that has been riveted…
No long-term contract, Natalie - but a service plan is required to use the trackers. When you buy the 3000 with wifi assist #PM84FR, 5000 #PM64FR, or 5000 with wifi assist #PM74FR from etrailer, you’re purchasing the hardware/device only. To activate…
On an 4 foot long section of E-track #EM19147 and 2 screws every 16 inches that is a total of 6 screws in the aluminum frame. This most likely will not get you near the capacity of the E-track. I recommend bolting through the aluminum frame so that…
Your board can be no more than approximately 1-1/4" thick if you'd like to completely fold up the folding workbench you asked about: - CargoSmart Folding Workbench Brackets for E-Track or X-Track - 26" to 40" Tall #3481744 The…
Hey Bart! The Tie Down Side-Mount Spare Tire Mount #TD68FR can be used with a 3" tall trailer tongue. It actually comes with two different U-bolts so it will work with a 4" or a shorter 3" like yours. What kind of trailer do you have?
Welcome back Fred! I reached out to our quality department and found out the etrailer Horizontal E Track item #e62VR are electro-galvanized. This method ensures corrosion resistance for both interior and exterior use. The etrailer Horizontal E Track…
E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…
The CargoSmart Folding Workbench #3481744 will sit approximately 3-3/4 to 4" out from the CargoSmart X-track mount #3481770. The braces on the CargoSmart Folding Workbench are 2-1/2" tall and the bracket that mounts in the X track is sits…
Kevin, that’s exactly what these PingMaster trailer trackers are built for. All three models - the PingMaster 3000 w/ WiFi Backup #PM84FR and both PingMaster 5000 versions #PM64FR and #PM74FR - use motion-sensing alerts that notify you the moment the…
Hey Dave, thanks for reaching out! The Erickson Round D-Ring Tie-Down Anchor #EM59110 has a capacity of 1,200 lbs and is not going to be strong enough to cinch down your Polaris RZR securely. You need the CargoSmart Anti-Rattle D-Ring Tie-Down Anchor…
Since you have wooden floors in your trailer the hardware I would recommend for installing e-track like the part #EM19147 would be the Erickson Hardware kit part #SL49FR which is basically wood screws.
Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…
Hey Dustin. I installed the Enclosed Trailer Transition Plate item #M368FR on a trailer here when we first got them in and you're good! That plate is single solid piece of steel. It's got a heavy duty piano style hinge that has been riveted…
No long-term contract, Natalie - but a service plan is required to use the trackers. When you buy the 3000 with wifi assist #PM84FR, 5000 #PM64FR, or 5000 with wifi assist #PM74FR from etrailer, you’re purchasing the hardware/device only. To activate…
On an 4 foot long section of E-track #EM19147 and 2 screws every 16 inches that is a total of 6 screws in the aluminum frame. This most likely will not get you near the capacity of the E-track. I recommend bolting through the aluminum frame so that…
Your board can be no more than approximately 1-1/4" thick if you'd like to completely fold up the folding workbench you asked about: - CargoSmart Folding Workbench Brackets for E-Track or X-Track - 26" to 40" Tall #3481744 The…
Hey Bart! The Tie Down Side-Mount Spare Tire Mount #TD68FR can be used with a 3" tall trailer tongue. It actually comes with two different U-bolts so it will work with a 4" or a shorter 3" like yours. What kind of trailer do you have?
Welcome back Fred! I reached out to our quality department and found out the etrailer Horizontal E Track item #e62VR are electro-galvanized. This method ensures corrosion resistance for both interior and exterior use. The etrailer Horizontal E Track…
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Horizontal E Tracks are perfect for securing a variety of items in trailers. They offer flexibility in placement and are known for their heavy-duty strength, making them ideal for enthusiasts who need reliable and versatile tie-down solutions.
Horizontal E Tracks provide a versatile solution for organizing and securing items in trailers. They allow for flexible placement of tie-down points, making it easy to customize the setup for different loads. This adaptability is perfect for those who frequently change the items they transport.
These tracks are made from heavy gauge steel, ensuring durability and strength. They can handle significant weight, making them ideal for securing heavy items like vehicles or equipment. Their robust construction means you can trust them to keep your load secure during transit.
Yes, installation is straightforward. Many find that pre-drilling and using all fastener holes ensures a secure fit. With the right tools, a single person can install them in a few hours. This ease of installation makes them a popular choice for DIY enthusiasts.
Absolutely! Their design allows them to be cut into sections, making them perfect for tight spots or specific areas in a trailer. This flexibility is great for those who need to secure items in compact spaces without compromising on security.
They provide a stable and secure base for attaching ratchet straps, which are essential for keeping vehicles in place. This system eliminates the need for D Rings and reduces the risk of damage from tie-downs connected to the frame, making it a safer option for vehicle transport.
Filters
