
What you haul changes from trip to trip. One weekend it's bikes, the next it's gear and cargo. Add wheel chocks, O-rings, and tie-down accessories to this high-strength E-Track rail, then set up the bed the way you want it.
One weekend it's dirt bikes. The next it's gear, tools, or whatever followed you home. This rail gives you a place to start, then accepts compatible wheel chocks, O-rings, and tie-down accessories as your setup evolves. You can keep adding to the system as your hauling needs change instead of starting over every time they do.
When you're setting up more than one attachment point, a longer rail gives you room to work. This 36" section gives compatible wheel chocks, O-rings, and tie-down accessories more space across your setup, making it easier to organize the way you haul.
What starts with a couple dirt bikes usually doesn't stay that way. This high-strength rail is tested to handle up to 3 times the load of standard E-Track, while the black powder-coated finish and deeper rail profile are ready for the bikes, gear, dust, and dirt that come with a trailer that actually gets used.
This rail uses the familiar E-Track slot pattern, but it isn't the custom-fit truck-bed rail system used with Moto-Choks. Those systems are shaped to match truck-bed contours and position accessories where they're needed for bike hauling. High-Strength E-Track is designed for trailers, toolboxes, and other flat-wall installations where you want more attachment points and the flexibility of E-Track accessories.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steven here with the etrailer. Today we're taking a look at our Z-TRAK high strength E-TRAK tie down rail, 36 inches long. So folks, again, 36 inches long. You can put more attachment points where you need them. You can add compatible E- and Z-TRAK accessories, whether it's to trailers, toolboxes, other flat wall setups, and this will give you multiple room to do that.
And you can also keep expanding. You can add other things. You can add compatible wheel chocks or reattachments, tie down attachments, strap attachments. There's all kinds of stuff if you've never used E-TRAK or Z-TRAK. And this is a deep rail profile.
So it's going to reduce the chance of like mud debris filling up in there and blocking your access to those holes and everything. And if you ever do get mud or dirt, obviously just spray it off with a garden hose or a power washer or something of that nature or car wash and it'll come right out. Now as you can see, this is just the track. There are no mounting hardware included. You would just use whatever you need for your attachment.
So if you have metal, you probably need self-tapping metal screws. If you have wood, you would use wood screws. So I would estimate probably at least an inch and a half long, depending on your flooring or wall. So make sure you're checking your manufacturer specs on what your needs are for your particular setup. And that's going to wrap up our look together, folks.
I'm Steven. Thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.