What Size Couplers Are Compatible With BTBRV 2k Tongue Weight Scale

Question

Question:

Can I use this tongue weight scale with any trailer coupler?

asked by: Bob

0

Expert Reply:

Hey Bob! The Big Truck Big RV Tongue Weight Scale for Trailers - 2,000 lbs # BTBRV49FR works with standard 1-7/8", 2", and 2-5/16" ball couplers. Simply lower the trailer coupler onto the scale and read the tongue weight directly from the gauge. The scale is also available with a SnapPad # BTBRV76FR.

Do you have a variety of trailers with different couplers?

expert reply by: Robin H

0

BTBRV Scale
(click to enlarge)

Answer 1

Hey Jeff, great question! Choose the 2,000 lb model if you tow larger travel trailers, enclosed trailers, dump trailers, equipment trailers, or other heavy-duty trailers with tongue weights that could exceed 1,000 lbs. It works for lighter trailers…

view full answer...

Answer 2

Hey Doug, for your Ventadome V3094 the vent cover you would want would be the MaxxAir part #MA00-933069 which is a universal style vent cover. We don't have anything that is custom fit for the Ventadome at this time.

view full answer...

Answer 3

Hey Phil, yes the Kuat Piston ION E-Bike Rack part #KU89SR will fit the hitch you have installed on your 2019 Jeep Wrangler and will clear the rear spare as this bike rack has 14-1/4 inches from the center of it's hitch pin hole to the nearest…

view full answer...

Answer 4

You would need the standard MaxxAir Vent Cover part #MA00-933069 as a vent cover for the top of the Ventline E-Z Lift Ventadome #V3092-603-00. This cove allows you to leave the vent open even if there's rain and not worry about water getting in.

view full answer...

Answer 5

Hey Rich, the standard Maxxair roof vent cover part #MA00-933066 is what Maxxair recommends to fit your Ventadome. This cover was designed to match up with the 4 mounting points on the Ventadome.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

What Size Couplers Are Compatible With BTBRV 2k Tongue Weight Scale

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching