What you haul changes from trip to trip. One weekend it's bikes, the next it's gear and cargo. Add wheel chocks, O-rings, and tie-down accessories to this high-strength E-Track rail, then set up the bed the way you want it.
One weekend it's dirt bikes. The next it's gear, tools, or whatever followed you home. This rail gives you a place to start, then accepts compatible wheel chocks, O-rings, and tie-down accessories as your setup evolves. You can keep adding to the system as your hauling needs change instead of starting over every time they do.
Sometimes your setup needs more than a single attachment point. This 18" section gives you additional room for compatible wheel chocks, O-rings, and tie-down accessories, making it easier to expand the setup you already have.
What starts with a couple dirt bikes usually doesn't stay that way. This high-strength rail is tested to handle up to 3 times the load of standard E-Track, while the black powder-coated finish and deeper rail profile are ready for the bikes, gear, dust, and dirt that come with a trailer that actually gets used.
This rail uses the familiar E-Track slot pattern, but it isn't the custom-fit truck-bed rail system used with Moto-Choks. Those systems are shaped to match truck-bed contours and position accessories where they're needed for bike hauling. High-Strength E-Track is designed for trailers, toolboxes, and other flat-wall installations where you want more attachment points and the flexibility of E-Track accessories.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steven here with etrailer. Let's take a look at our Z-TRAK high-strength E-Track tie-down rail, 18 inches long. So folks, this rail will give you a nice foundation for securing bikes, equipment, and cargo right where you want it. So whenever gear starts getting heavier, this high-strength track will give you a stronger place to anchor it all down. As you can see, it's got pre-drilled holes. You would just use self-tapping screws or wood screws depending on your particular makeup of where you're putting it.
And obviously, this is a heavy-duty high-strength steel with a nice black powder coat finish on it. It kind of has like a texture finish almost, but it's not really gritty at the same time, if that makes sense. So it's a great option for you. It is compatible with Z-TRAK and E-Track attachment accessories, so wheel chocks, O-rings, tie-down things, et cetera. This will fit both E-Track and Z-TRAK alike.
So again, I like this because now you can put a piece in a smaller spot. So this would actually fit good behind maybe a wheel well on an enclosed trailer or a truck bed even, depending on what your setup is and those kind of things. And it's just a smaller piece so I can put in different spots and not take the full length or the full space up, giving me space for other things in my vehicle or trailer. We do carry these in multiple lengths, so check them all out from way down to four inches all the way up to multiple feet long. I'm Steven with etrailer.
Thanks for watching.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.