Most Popular Fixed Rack for Ford F-150

One year review requested by etrailer.com. Box arrived extreamly tore up. Rack was obviously used but not damaged. I contacted etrailer who gave me a 30% discounted return. Racks held up well but I noticed a crack in the weld on one of the bars shown in the picture. I've put a 32' extention ladder on it a few times but ususally smaller a-frames and a 28' extention a couple of times. I'll get someone to fix the cracked arm. Overall I'm fine with the customer service and performance for the price. I recently removed the handy triangular hold downs for the past winter since I wasn't using the rack.

Click to Enlarge

Thus ladder rack has been a very useful addon for my Nissan Frontier. I recently re-installed on a 2023 Nissan Frontier Pro and it went smoothly. My only criticism is that the hand knobs for the adjustable load stops are too small for the task.

Click to Enlarge

Best rack on the market, and I’ve owned many! This is my second set of TracRac ladder rack systems. The first in 2006, and it was still going strong until I sold the truck with the rack on it, and now this one I purchased in 2022. Unfortunately, this will be my last one as it will take me into retirement, but it will live on with the new owner that buys this truck! Thank you for manufacturing such a good quality product. A+++++

Click to Enlarge

The rack is slim and not overly gaudy for my Denali. But handles a decent amount of weight is quite sturdy for lumber and my 15' canoe.

Rack was a good fit for my 2016 Chevrolet Colorado and is solidly constructed and easy to install. Expensive but probably worth the money. No problem at all with black powder coating in screw threads, which many other reviewers complain about. I bought the Thule aero rack pads at the same time. They do not fit the rack properly and I’m disappointed that etrailer did not question the order and offer advice.

Click to Enlarge

Rack is sturdy and well built. Took less than an hour to assemble and install. Maximum height of rack does not clear the top of the cab of a 2016 Ford F-350 SD Crew Cab. If you want to carry a kayak it will require foam blocks or Malone kayak saddles made for the Tracrac(not carried by etrailer). You can not carry a long ladder if used on this vehicle. Over all it is good rack though.

Click to Enlarge

Click to Enlarge

I ordered a truck rack Monday Sept 17th just after 8am pacific time. Within an hour I received an e-mail that the order was being processed. A short time later i received an e-mail that the order had shipped . I received my order on Friday the 21st. I have installed the Rack in my truck and it looks great. I am a return customer and would recommend etrailer to anyone in the market for any items they may need. Etrailer your great. Thanks for the fantastic service.

Click to Enlarge

More expensive than other racks but I was impressed with the quality of the components, the directions and even the packaging. I wanted racks that I could adjust as low as possible to ease the loading of kayaks and just clear the cab. These adjust to just about any height you'd want in 3/4 inch increments. My only doubt is whether the C clamps that secure the bases to the bed rails might loosen over time.

Great value full size ladder rack. Very impressed with the quality and how durable the steel frame is. 1-year in, haven't had any issues with rusting or loose bolts, which is what I have experience in the past from similar racks. Would highly recommend if you need a full-size ladder rack for a small to mid-size truck.

Easy assembly and installation I had to modify the J-bolts or buy different ones for my bed, but they were readily available at the hardware store. I use it for hauling lumber, steel, kayaks. It has been a terrific addition to my truck.

Install wasn’t horrible but I can’t imagine removing it often. The stops naturally don’t slide on the rail but can be relocated without tools which is nice. Seems sturdy. The cons, it’s steel and has started rusting after two weeks in places the paint wore off during install. I will have to clean it up and repaint it to keep it from looking horrible. In addition, the J bolts sit pretty far off the side of my 2007 F150 so the bracket is hanging off the rim inside about an invh. Once all together it doesn’t seem to matter but would be more comfortable if it sat tight. Overall, it gets the job done but if looking for pretty, get something that doesn’t rust.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

The product itself is of good quality. It is a heavy duty truck rack. They say it is adjustable but that is only if you have the wrenches with you. It took several hours to assemble it alone. The bolts need to be a little longer especially on the mounting sleeves and the top of the cross bars. The sliding mounts were quite difficult putting on as the sleeves were very tight, I recommend WD - 40. When it was to the point of installing the cross bars it was necessary to loosen the mounting sleeves and move them. I called customer service and sent several e-mails and received no responses . I plan on using it to carry my kayaks while pulling a travel trailer.

Click to Enlarge

The rack is great. Simple to install, extremely sturdy & very well designed. I drove it to Cars & Coffee yesterday & someone asked me what I needed to haul or if I merely installed them "because they look cool." The young lady, Janeth, that helped me was really great! Smart, polite, patient, & above all... knowledgeable about product. I would suggest selling the rack specific for Retrax bed cover. The amount of hardware left over when you add the adapter kit to the standard rack seems really excessive. Rather than be $169 add, it should be a deduct of at least that much.

Click to Enlarge

Very happy with the Yakima setup. Sturdy, good fit and finish on all parts. Ended up ordering a second set for a work truck.

Had one broken piece and I called and they sent the part really quick. Orders ship fast and great customer service.

I am a contractor and just upgraded to a new Toyota Crewmax. While I love the truck I needed to solve the issue of hauling materials in a bed that was significantly shorter than the old truck. The Thule with the cantilevered extension was the perfect no-drill solution.

Product worked amazing

Click to Enlarge

Awesome product. Very sturdy. Will work with Backflip G2 cover installed

Bought this for my 2020 Toyota Tacoma and with the adapter kit (https://www.etrailer.com/Accessories-and-Parts/Thule/THXK4.html), it works perfectly for what I needed. Right now using it to haul two kayaks but eventually will be using it to haul a hardtop camper. Perfect midsize height. Very sturdy, somewhat easy to assemble (Thule instructions are pretty bare bones but once you get started it's pretty easy to follow).

Click to Enlarge

Click to Enlarge

Click to Enlarge

It’s very well made, heavy duty. Looks good and should last a very long time. I’ve put my Yakima SkyBox 18 on it and we are ready for adventure.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Ability to raise and lower the rack is very useful. It allows me to keep the boats as low to the ground/truck cab as possible for easier loading/unloading. I can raise the rear rack and load a motorcycle without removing it. I have removed the endcaps and run straps through the crossbars and was able to load two 17 aluminum canoes at once. Note, the endcaps are a bit delicate and extremely expensive to replace!

Click to Enlarge

Click to Enlarge

Click to Enlarge

I recently made a 4 hour trip home after picking up a new kayak while using the following equipment for the first time: Thule Xsporter Pro Truck Bed Ladder Rack, Thule Hull-A-Port Kayak Carrier w/Tie-Downs - J-Style, Thule Watersports Adapter for Aeroblade/Aeroblade Edge Bars and Thule Bow/Stern Tie-Downs. I'm impressed with the performance of all of those components.

Click to Enlarge

Click to Enlarge

I installed the rack this morning with no issues. Simple process that took about an hour only because I am picky about everything being square, even and perfectly placed. I was surprised that the unit was as heavy duty as it is. I was expecting something much lighter in gauge of steel. It sits very sturdily on the truck with zero movement. Even my wife thinks it looks rather stylish (neither of us wanted the work rack look). Thanks for the great service and follow up after the sale to let me know it had shipped, you received notification of delivery, and how I liked the product and install. I've learned through experiences that this is the kind of service one can expect from etrailer.com.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I bought the Adarac Aluminum Crossbar Series Ladder Rack a year ago to use for hauling kayaks and it has worked well. It is sturdy, was easy to install, and looks decent on my truck. The paint has held up well. I was able to haul my kayaks from Pennsylvania to Florida and back with no problem. People have stopped me in parking lots asking about the ladder rack. I got a quality product at a reasonable price. The only negative thing I'll say is the ladder rack whistles sometimes. This happens when you get a strong crosswind but the noise is tolerable.

I ordered this product hoping for something less involved than drilling through the bed like a normal latter rack. I wanted something I could eventually take off when work was done and repurpose the vehicle. The first issue, a minor one, was that I had to find and buy hex heads large enough to install the rack bolts. They are massive. A small pain to find which delayed installation. Once I started working and screwing the bolts, both of the bottom plates machining were off. The eyelets used to hold the bolts in place on the masts were at different widths from the bottom eyelets on the plates. Hoping for the best I screwed them as best I could because I didn't have time to order a new rack and install it. As I tried to tighten the bolts at the adequate height with out slippage occuring. Once it was tight, I realized I had bent the bed frame. The post I had at the rear of would require retightening the clamp periodically after taking a rubber mallet to scoot it back into place to keep it from falling over. I've long been finished with my job that requires a ladder rack so I have no need for it. I can't possibly sale it knowing the manufacturing defects. Maybe someone will need it in a pinch. I love the concept but poor machining did it in.

Click to Enlarge

I bought this ladder rack to haul my canoe, which is hanging above my 2016 Nissan Frontier King Cab in the first picture. Since I have a tanneau cover and the Utili-Track system on the bed I had to trim 5/16" off the top of the block on the stop bolts to get them to fit between the rail and the top of the bed. If you don't have a tanneau cover these will fit the Frontiers 6 foot bed without any modifications at the very ends of the rail. I did add a 1/8" sheet of hard rubber to the foot of each rack for better grip to the bed, spaced a half inch from the edge to clear the curve in the bed. The Nissan bed has some indentations that will require a filler block for the foot to rest on near the tailgate. I had a 3/4" chunk of hard plastic that fit perfectly. What I like best about these ladder racks is that they are easy to install, after the initial set-up, and easy to remove. I didn't want anything that was permanently mounted or requiring holes to be drilled in the bed. These are exactly what I was looking for. I haven't taken the canoe out yet but I will have no worries with these racks. I highly recommend them.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

The quality of the Thule T-Rac Pro 2 is very good and will last forever (never go back to steel). I have a short-bed GMC 2500HD and the storage space overhead for ladders, aluminum planks, 12 - 16 foot boards, etc. is a game-changer. However, I ordered extra load stops and M8 knobs direct from Thule and they did not include the screws to mount the stops (don't even list them in their catalog). I deduct 2 stars for Thule support being a pain

Really nice heavy duty rack. I was able to mount it on my Pace Edwards full metal Jackrabbit bed cover with Explorer rails. Just had to drill two holes in each mounting plate and grind some carriage bolts to fit in the slots. One complaint... I don't understand why one top rail has an opening in the slot for installing accessories and the other top rail does not. I have to take the end cap off to install anything.

Delivery was fast as usual. The installation does take a couple hours and is much easier with a second set of hands. I have a drop in bed liner on my F150 so I did have to do some cutting but my oscillating tool made that a quick modification. Make sure to use the no seize on the bolts so they don't heat up when cranking them into place. Lastly, there are NO drain holes in the bottom of the tubes and believe me they do fill with water and ice in cold temps. I drilled two 1/2 in. holes in the sides at the bottom so they can drain but if I realized there were no weep holes I would have drilled a hole in the bottom of each before installation. After drilling the hole, make sure to coat with a primer and some paint to prevent rusting. Other than what I encountered they will serve their purpose and seem good overall.

I’ve been using this ladder rack for a year now and it has stood the test of time. I love the ability to remove the arms when I’m not using them so my tonneau cover can be closed. Highly recommended for the occasional need for a tough ladder rack.

The product was ok but missing a part, took over a week to get a replacement. I ordered from here because it was faster shipping but now that is irrelevant. Should have gotten it from [online]. XXX bucks less. You would think etrailer would overnight a missing part….. nope, just attitude. Lesson learned.

This ladder rack was very easy to put together. It is well made and for the price it is well Worth the price.

Click to Enlarge

Click to Enlarge

Absolute garbage. This is my second one in two years that has broke. 1st one broke the welds where the legs meet the actual rack. etrailer was kind enough to replace it under warranty. I shipped it to them and UPS lost it. Out $xxx due to UPS. I go ahead and buy a second one assuming I just received a faulty one. A little over a year later, same issue. Ladder rack is unusable. I have never put more than 300lbs on the rack. etrailer's customer support is excellent. This product is garbage though. Luckily I caught it before it broke off while driving potentially killing someone.

Click to Enlarge

Click to Enlarge

Over seems to be a good product. More pictures would have sped me up but not that tough to put together. Make sure to tighten the larger bolts slowly or use anti-seize lubes as it can weld itself together from the heat of friction only drawback with S.S bolts. One nut was missing outside of that it was complete.

Click to Enlarge

Worked perfect for my 2024 Tundra with a Retrax pro XR tonneau cover. Installation was easy.

Click to Enlarge

Click to Enlarge

Click to Enlarge

This new Yakima HD truck bed rack is fantastic for my new Retrax XR Tonneau cover. I've been looking for months to get this rack and no one had it in stock due to the pandemic. etrailer was the first one that I noticed to have it in stock and they quickly shipped it to me and it arrived in about 3 days. The instructions we very straight forward and I installed it in about 45 minutes due to the easy connection with the T bolts and the slots in the Retrax XR cover. It was basically a matter of connecting the bolts/nuts and adjusting/lining up the support posts. I will be using it to haul 2 - 12' kayaks when I have my bumper pull camper in tow. I'll also be using 4 Yakima Handroll Kayak Loaders on the rear to assist in getting them loaded on top of the high bed rack. I can't wait to try it out on one of my long haul camping trips.

Click to Enlarge

Click to Enlarge

The rack is great. I have added kayak and paddle holders to it. Rotopax cans and just recently added Roam case mounts to it. All bolted up with no problems and the racks adjustability made it even easier. No complaints 1 year in. Finish has no defects. Had held up to light off road use.

Click to Enlarge

Works seamlessly with the retrax rollup cover and not too hard to install. Adjusting the height takes a little bit of work but that is only done on a very limited basis. Allows me to carry my kayaks, a cargo box if I need extra space or paddles & fishing rods so they don't get damaged by closing the tailgate on them.

Click to Enlarge

The hidden T-Head that clamps under the bedrail is preventing the rack to be installed in the far rear of the bed of a Ram 1500 (I can’t speak for other trucks) due to divots Ram puts in the beds. Because I have to push the rear rack a little forward, it will create a tipping point for anything longer than 8’ long (Ram 1500 has a 5’5” interior bed length). The attached photographs is of a 6’ ladder, which fits perfect.

Easy to install and adds multi use of accessories while leaving your bed open for other options. Mainly I purchased for camping, allows me to store bike racks on top of the bar while allowing me to load the bed chairs coolers and firewood etc. my truck is a 2020 Toyota tundra with the 6 1/2 foot bed and factory truck bed rail system.

Click to Enlarge

Click to Enlarge