2021 Ford F-150 Brake Controller

Features:

The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.

Installation Notes:

You need item ETBC7 ($118.39) to install your controller.

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

You may also need a 4-Flat connector to complete your wiring.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.

Installation Notes:

You need item ETBC7L ($117.06) to install your controller.

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Features:

This is one of our favorite brake controllers, with a tiny dash knob that looks like it came straight from the factory. It's easy to adjust your settings or activate manual override. It brakes so nicely it's like you're not even towing.

Installation Notes:

You need item ETBC7 ($118.39) to install your controller.

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

You may also need a 4-Flat connector to complete your wiring.

Features:

Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Features:

A lot of controllers have come and gone over the years, but the P3 remains one of the most reliable. It might not have a ton of new-fangled features, but it always gets the job done. And we love how easy it is to customize, adjust, and save settings.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Tech Tip:

Connector is located under driver's side kick panel.

Features:

A lot of controllers have come and gone over the years, but the P3 remains one of the most reliable. It might not have a ton of new-fangled features, but it always gets the job done. And we love how easy it is to customize, adjust, and save settings.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Tech Tip:

Connector is located under driver's side kick panel.

Features:

This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.

Installation Notes:

You need item ETBC7L ($117.06) to install your controller.

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Features:

This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Features:

This proportional brake controller automatically syncs to your vehicle's computer network for smooth, precise braking. Low-speed brake adjustment gives you 2 settings for different speeds. Plug-and-play controller mounts in any direction.

Installation Notes:

You need item ETBC7 ($118.39) to install your controller.

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

You may also need a 4-Flat connector to complete your wiring.

Features:

This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.

Installation Notes:

You need item ETBC7 ($118.39) to install your controller.

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

You may also need a 4-Flat connector to complete your wiring.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

You need item ETBC7 ($118.39) to install your controller.

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

You may also need a 4-Flat connector to complete your wiring.

Features:

This is one of our favorite brake controllers, with a tiny dash knob that looks like it came straight from the factory. It brakes so nicely it's like you're not even towing. The unique off-roading mode helps you handle rough conditions.

Installation Notes:

You need item ETBC7 ($118.39) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Tech Tip:

Connector is located under driver's side kick panel.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Tech Tip:

Connector is located under driver's side kick panel.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display is large and bright so it's easy to see, while the large manual override is easy to reach in a pinch.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.

Features:

This brake controller likes to keep things simple, with a thumbwheel on the front to adjust the output settings and a lever on the side for the sensitivity. The digital display is large and simple so you can read it with just a glance.

Installation Notes:

You need item ETBC7 ($118.39) to install your controller.

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

You may also need a 4-Flat connector to complete your wiring.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. Plus, it's plug-and-play, so no splicing and no permanent alteration to your vehicle.

Installation Notes:

You need item ETBC7 ($118.39) to install your controller.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.

Features:

You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.