2021 Ford F-150 Brake Controller

Features:

Simple and rugged, this time-delay brake controller is able to install in any direction, even upside down. Includes a large digital display with a dark smoke lens that can be read even in direct sunlight. Activates brakes with a preset intensity.

Installation Notes:

You need item ETBC7 ($142.75) to install your controller.

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

You may also need a 4-Flat connector to complete your wiring.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

You need item ETBC7 ($142.75) to install your controller.

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

You may also need a 4-Flat connector to complete your wiring.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display is large and bright so it's easy to see, while the large manual override is easy to reach in a pinch.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.

Installation Notes:

Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.