bing tracking image
Q & A Icon

Looking for Replacement Actuator for Atwood for Jayco 1406  

Updated 08/10/2026 | Published 06/14/2026

Question:

I have a 1996 Jayco 1406 tent trailer that has an old Atwood surge brake coupler. The trailer has dexter torsion axles with 7inch hydraulic surge drum brakes. The master cylinder is rusty and one of the wheel cylinders is leaking. Id like to replace the brake assemblies and find a new coupler for it. The current coupler is welded in place. Id like to try to go bolt in if possible.

0

Expert Reply:

Hey John, to pick out the correct brake assemblies for your Jayco 1406 I would need to know the axle capacity if you can get that to me. Then for a drum brake surge actuator the Demco part # DM72VR would be what you'd need to replace the Atwood. This can bolt on or it can weld on depending on what you prefer.

expert reply by:
0
Jameson C
Ts profile picture

Ts

8/9/2026

The Demco bolt-on, A frame coupler 50 degree with easy latch 2” ball x 10k was installed with ease on my Max Built 18 car hauler 7000 GTW. I haul my tractor and wanted a more secure connection. It is as solid as it gets with thick metal that is a perfect fit on my trailer frame with no warping or gaps after 3 yrs of use. My only cons are the plastic on the latch is a little soft and maybe deformed from lifting it while disconnecting the ball. However, it has not cracked or failed in our hit and cold climate. The other is not the coupler itself but how the fasteners recommended should be made available from trailer like a choice of certain lengths. As I write this, I am expecting a coupler that accepts the 2-5/16 “ ball and using it with the equalizer WDH in a continued trailer upgrade. The current coupler uses 6 bolts(3 each side) so the new coupler which is also Demco uses 10 (5) and the bottom 3 line up with the existing holes in the frame. Quality products.

Jameson C. profile picture
Etrailer Expert

Jameson C.

8/10/2026

@Ts glad the coupler is working well for you! Yeah coupler hardware is a little frustrating as most trailer don't use the same hardware so having a single solution is hard to do. Different sizes would be helpful for sure though.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>