bing tracking image
  1. Trailer Door Hinges
  2. Polar Hardware
  3. Ramp Door Hinge
  4. Greasable Pin
  5. Steel
  6. 8-3/16 Inch Long
Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
Polar Hardware

Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel

Part Number: PLR1902
In Stock
$43.26
Trailer Door Hinges
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Easy-to-weld, heavy-duty hinge features a grease zerk fitting that lets you easily grease the pin for smooth and long-lasting operation. This durable steel hinge replaces a damaged or rusted hinge on your trailer's ramp or access door. Great Prices for the best trailer door hinges from Polar Hardware. Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel part number PLR1902 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (243)
  • Q & A (0)
  • Videos (1)
  • Photos

Polar Hardware Trailer Door Hinges - PLR1902

  • Ramp Door Hinge
  • Greasable Pin
  • Steel
  • 8-3/16 Inch Long
  • 4 Inch Wide
  • Weld-On
  • Polar Hardware

Easy-to-weld, heavy-duty hinge features a grease zerk fitting that lets you easily grease the pin for smooth and long-lasting operation. This durable steel hinge replaces a damaged or rusted hinge on your trailer's ramp or access door.


Features:

  • Heavy-duty hinge replaces a damaged hinge on your trailer's ramp or access door
  • Grease zerk fitting lets you easily grease the hinge pin for smooth operation
  • Steel construction is heavy duty and long-lasting
  • Raw finish makes the hinge easy to weld on
  • Made in the USA


Specs:

  • Bracket dimensions: 4" long x 2-5/8" wide; x 1/4" thick
  • Pin dimensions: 8-3/16" long x 1" diameter


Polar Ramp Door Hinge Dimensions


1902 Polar Hardware Ramp Door Hinge - Steel





Video of Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Ultimate Overview of the Ramp Door Hinge

Today we're going to be taking a look at the ramp door hinge from Polar 00:00:05 hardware. This hinge is designed for ramps or heavy access doors on your trailers. It's made from a very strong and durable steel construction. It's going to have that plain or raw finish, which allows for easier welding for the installation. You'll notice that right here it does come with a grease fitting. That's going to allow for long life and smooth operation.

Once this is installed all you have to do is attach a grease gun to that, pump in some grease. That's going to lubricate the internal pin and it's just going to allow for really nice, smooth operation. Overall, it's going to increase the life of the hinge. A few measurements to go over with you real quick. The thickness of the plate right here is going to be 1/4-inch steel. Going this direction, that plate is going to measure 4-inches.

Going this direction, it's going to measure 2 1/4-inches. The length edge to edge, we're looking at a measurement of 8 1/4-inches. Then the ends are going to have a diameter of right around 1-inch. Really nice operation though. It's going to rotate all the way.

Very easy to do and again if that ever gets tight or whatever, hook up a grease gun, pump in the grease, it's going to lubricate the internal components. That's going to do it for today's look at the ramp door hinge from Polar hardware.

Customer Satisfaction Score:


Customer Reviews

Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel - PLR1902

Average Customer Rating:  4.8 out of 5 stars   (243 Customer Reviews)

Easy-to-weld, heavy-duty hinge features a grease zerk fitting that lets you easily grease the pin for smooth and long-lasting operation. This durable steel hinge replaces a damaged or rusted hinge on your trailer's ramp or access door.

by:

Works great! Added it to my toy hauler because I started using it to transport my Miata. The heavy duty hinge gives me peace of mind knowing it can easily handle the added weight.

Victoria H. profile picture
Etrailer Expert

Victoria H.

11/25/2024

What a beautiful and fun car to drive, Al. Thanks for sharing the photos!

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

11/25/2024

Hey Al! That is one sweet ride and I love the action shot you sent in!



by:

Used these to build a tailgate on a utility trailer I was rebuilding that has been in the family for 50 years. Heavy duty hinge, and appreciate the grease zert.

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

3/5/2025

Wow, 50 years? That's awesome, Joe! l feel like the trailer has turned into a family heirloom of sorts.



by:

Great product. Replaced and upgraded my broken hinge on my 7x14 cargo trailer. (Instead of 2 ,we now have 3) The ramp door is extra sturdy.

High-quality and recommend for any trailer hinge replacement. Better than factory.



by:

Industrial strength hinges . I have used these for my steel gates for years. Once greased, they open easily.



by:

We used this to make a door for a trailer to haul ATVs, dirt bikes, UTVs, etc. The hinges are placed towards the bottom so the door may be used as a ramp. The hinges have held up against the UTVs just fine!



by:

This hinge is high quality and strong. It was the perfect replacement for rusty hinges on our trailer. Ordering from these guys was very easy, and the product arrived just as described.



by:

I have an older "Lark" trailer that had 3 hinges similar to these ramp door hinges I purchased from e-trailer. Two out of three had broken over the years. Lark was of no help when I contacted them. I went to several places that are known here in Orlando for trailer repair. They want a kings ransom to replace them. So, I located these hinges on e-trailer.com I ordered them and they were promptly delivered. Examined them closely and they are well made, and also have the grease nipple for keeping them lubricated. A local metal shop came and welded them on my trailer. These hinges are perfect. If you have a car-hauler or any trailer for that matter - you won't be disappointed in these hinges. No, I was not paid for this endorsement - and I did paid full price for the hinges. Good value for my money.



by:

My parts were promptly shipped, in good condition upon arrival. Perfect fit for my application, and have had no problems over the last year. Application was for a 2010 piece American car hauler rear door ramp hinges.



by:

Great value on heavy duty hinges. I had a custom Bifold landscape ramp built. And used 8 of these hinges. Four at the body and four at the Bifold.

Works great. Shipping was super fast. And packing was excellent.
Looking forward to my next purchase with etrailer..



by:

Perfect fit. They work very well



by:

Shipped fast exactly what I ordered fix my trailer rear door . Heavy duty hinge awesome company to buy from thank you .



by:

The hinge continues to work as advertised and expected. I’m satisfied with the part and the customer service.



by:

Super sturdy hinge! Worked great for the ramp door on our toy hauler.



by:

received promptly, looks very well buil t.

Joe profile picture

Joe

5/16/2024

still working like new after 1 year



by:

The hinges were heavier than I expected. They were very easy to weld in and best. Of all, they have a grease fitting. I believe these will last the life of the trailer.



by:

This was exactly what we needed to complete our custom landscape truck ramp.



by:

Parts are fantastic. Shipping was 5 days past the day it was expected.



by:

Ordered these to use on a landscaping trailer for a rear ramp gate that will hold at least 800 pounds got 3 of them to spread the weight out, seemed heavy duty and they are, these are big hinges in a good way. The zerk fitting is a great plus! makes it easier than fabricating your own hinges. The square plate makes it easy to align and gives you enough material to weld to.Price was goog shipping was fast, customer service is always excellent.

Gq-rod profile picture

Gq-rod

12/14/2017

One year later they are still working perfectly. They have stood up well, can be greased easily, hold a lot of weight, over 800 pounds at a time have gone up this ramp using 3 of these hinges, no issues.



by:

great design. handles the door weight with out any issues.



by:

very easy to order fast delivery



by:

I received my Ramp Door Hinge and it is heavy duty and was packaged with care. I even called customer service to check arrival time and the individual who helped me was very kind. First of all a person answered the phone, second she did not ask for an order number just my name and she was able to tell me exactly what was going on with my order and when it should arrive. My order arrived exactly when she told me. I am hoping to get it welded on today and if I am able I will try to return here and post pictures. Thank you guys.

Boris profile picture

Boris

2/20/2023

After a year of use my rear ramp door hinge is still holding up as if it was just installed yesterday. There is no slack nor looseness what so ever. Its a great product, very durable in deed. Definitely made the right choice with that purchase. 100 still satisfied.



by:

Very strong and great quality hinge. Will likely outlast the trailer I installed them on

Christopher profile picture

Christopher

3/23/2020

Hinges are still holding up great. Would definitely buy again



by:

Exactly as advertised. I have yet to install but I am happy with the hinge purchase.



by:

The product is a strong and heavy duty as reprresented



by:

AAAAAA+++++++++


25
243
Show More Reviews

See what our Experts say about this Polar Hardware Trailer Door Hinges

  • Does the Polar Ramp Door Hinge # PLR1902 Have 2 Plates for Welding
    The Ramp Door Hinge # PLR1902 that you referenced does not come with 2 of the plates for welding. You will weld the plate to one surface and the outside ends of the pin to the other for installation. For a hinge that has 2 of the plates you would want the Polar Butt Hinge # PLR1005.
    view full answer...
  • Replacement Spring And Hinge Options For A 2008 Jayco Recon ZX 37U Toy Hauler Ramp Door
    Our ramp door hinge selection is limited to just part # PLR1902, which can be welded in place. As for the springs, we have a bit of a selection that you can narrow down depending on the width of the ramp door and the capacity needed. For example, part # M394FR can fit a door width of 67-3/4" to 95-1/2" and has a spring capacity of 185lbs. I've attached a link below to our spring options.
    view full answer...
  • Door Hinge Bracket with 4 Inch Width
    We don't have exactly what you are looking for. The # PLR1904-Z you referenced is 3-1/8 inch without the strap. The best other option is the Ramp Door Hinge - Steel # PLR1902 which utilizes as different hinge style and welds flat. It is 4 inches wide but without the bend. These are the only ramp door and dump door hinges we carry.
    view full answer...
    Image 1 for Image 2 for
  • Can the Polar Door Hinge PLR1902 be Separated?
    The ends of the Polar Ramp Door Hinge # PLR1902 are actually welded on, so they cannot be separated. However, we do have a few other options available for you. The Polar Dump Door Hinge # PLR1904-Z does use a bolt to hold everything together. There is still a zerk fitting to allow everything to be lubricated. It is quite a bit different, however, so the next option may be a better option. The Redline 3/4" Greasable Hinge # HP344G can be paired with # HPN342. This could then be adapted...
    view full answer...
  • Replacement Ramp Hinges for Enclosed Trailer
    If your trailer is brand new and recently purchased ideally you would return to the dealer to have the ramp corrected. The amount of misalignment you describe seems excessive for a brand new trailer. If the trailer is parked on uneven ground the ramp may tend to lean to the low side; this happens just from the weight of the ramp twisting the hinge. If the ramp leans over even on flat ground then there may be damage to the hinges that secure it to the trailer structure or the ramp itself...
    view full answer...
    Image 1 for
  • Can Polar Hardware Ramp Door Hinge Be Used On Dump Trailer
    Hi Tim; the # PLR1902 can definitely be used on your 6 x 9 dump trailer. They don't have an exact capacity but will be able to handle whatever you're doing. Since they're similar to what you have now that would make them a great fit. The bracket measures 4" long x 2-5/8" wide x 1/4" thick and the pin is 8-3/16" long x 1" diameter. They also have that zerk fitting so they're easy to grease for smooth operation.
    view full answer...
  • Would Ramp Hinges PLR1902 Work as Replacement for H and H Trailer
    The ramp hinges part # PLR1902 don't have a specific weight rating, but I can tell you that by the sheer size of these things and their steel constructions that three of them would be just fine for a 4,000 lb rated ramp.
    view full answer...
    Image 1 for
  • Diameter of Post on Ramp Door Hinge # PLR1902
    The diameter of the post on the Ramp Door Hinge # PLR1902 that you referenced is 1 inch. I attached a picture that has several other dimensions for you to check out as well.
    view full answer...
    Image 1 for
  • I'm Looking At An Aluminum Butt Hinge For My Horse Trailer Ramp, Is This A Good Hinge?
    An aluminum butt hinge like Polar's # PLR1005 is a durable hinge that could work great on your horse trailer. My only concern with this hinge for your application is if your frame is steel instead of aluminum which could cause galvanic corrosion because they are dissimilar metals. If your frame is aluminum, I think this is a great choice and you will just need to be careful welding. I don't know how many you would need for your application, but most trailers use a minimum of 3 or 4....
    view full answer...
  • Installation of Ramp Door Hinge Polar 1902
    The Ramp Door Hinge # PLR1902 does require welding of both portions. The tab gets welded as you stated to one side and the outside cylinders get welded to the opposite side. I've attached a couple pictures to assist.
    view full answer...
    Image 1 for Image 2 for
  • Availability of Rear Swing Down Door Hinge
    It sounds like you're looking for a hinge like the Ramp Door Hinge # PLR1902. This heavy-duty hinge replaces a damaged hinge on your trailer's ramp or access door. It has a steel construction and grease zerk fitting to easily grease it for easy operation. The bracket measures 4" long x 2-5/8" wide; x 1/4" thick and the pin is 8-3/16" long x 1" diameter. This has a raw finish and is made in the USA.
    view full answer...
  • Are Ramp Door Hinges for Trailer Available?
    We do carry ramp door hinges though they are not made specifically for a Snowpro trailer. The ramp door hinge # PLR1902 is steel and gets welded on; I've added a photo showing the dimensions of this hinge as well as a link to a video review for you to take a look at and a link to our selection of hinges.
    view full answer...
    Image 1 for
  • Option For Hinges For Trailer Ramp Door
    Appreciate the photo, and while I couldn't find any reference to part number I550-000, we do have a possible option for the ramp door hinge: - Ramp Door Hinge # PLR1902 The # PLR1902 has a pin that measures 8-3/16" long x 1" diameter and has a grease zerk like yours; the bracket measures 4" long x 2-5/8" wide x 1/4" thick so you can use those measurements to see if it will work for your application.
    view full answer...
    Image 1 for
  • Ramp Door Hinges for Toy Hauler
    For your butt hinge, I recommend using the Paneloc 5 Knuckle Butt Hinge - 2-1/2" Long x 2-1/2" Wide - Stainless Steel # H674-200U. The pin diameter is 3/16 inch. You may want to use more than 5 depending on the weight you will be placing on that ramp door. For most toy haulers, a better option is to weld on the Polar Ramp Door Hinge - Steel # PLR1902, which has a built in grease zerk for easy maintenance. This is my recommendation for a stronger hinge for a ramp door.
    view full answer...
  • Capacity of Polar Enclosed Trailer Door Hinge
    The Ramp Door Hinge # PLR1902 isn't tested for a specific weight capacity. However, it is intended to be used on heavy trailer doors.
    view full answer...
  • Replacement Ramp Door Hinge For 6 X 12 Enclosed Trailer
    Thanks For the photos of your hinges. That helps a lot when we are trying to find something for a customer. I have attached a photo of a hinge, part # PLR1902 that may work for you. You can check out the photo and see the dimensions for the hinge. The hinge measures 8-3/16 inches long, the end pieces are 1 inch in diameter, and the plate portion measures 4 inches wide by 2-5/8 inches deep. This hinge is made of steel and even has a grease fitting to keep it lubricated for smoother operation.
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Dimensions of the Ramp Door Hinge part # PLR1902
    I went out into our warehouse to get the dimensions of the Ramp Door Hinge part # PLR1902 that you are looking for. Overall the hinge measures 8-3/16 inches long, the end pieces are 1 inch in diameter, and the plate portion measures 4 inches wide by 2-5/8 inches deep.
    view full answer...
    Image 1 for
  • Dimensions of Polar # PLR1902 Steel Trailer Ramp Spring
    The entire hinge is 8-3/16 inches long by 1 inch in diameter. If you take a look at the photo I've edited for you, you can see all the dimensions of the Polar Steel Ramp Hinge, part # PLR1902.
    view full answer...
    Image 1 for
  • Is There a Weight Capacity for the Polar Strap Hinges
    I have reached out to my contact at Polar before asking about the weight rating of their straps, like part # 2512, and I have been told that they don't really have a weight rating. There are so many different variables into the equation that it is next to impossible for them to give an accurate answer. I can say that they have directed me towards the Ramp Door Hinge # PLR1902 for heavier duty applications though. This is a much better application for a ramp as the stap hinges are meant...
    view full answer...
  • Hinge that Can be Used on Legend Trailer Ramp
    The Polar hinge part # PLR1902 would be a great option. This is a heavier duty hinge that would easily do the job.
    view full answer...
  • Replacement Ramp Hinge Recommendation for Trailer
    For a set of ramp hinges with a grease fitting the part # PLR1902 would work well for you. Overall the hinge measures 8-3/16 inches long, the end pieces are 1 inch in diameter, and the plate portion measures 4 inches wide by 2-5/8 inches deep. I attached a review video for this hinge for you to check out as well.
    view full answer...
  • Pin Diameter on Polar Ramp Door Hinge # PLR1902
    The Polar Ramp Door Hinge # PLR1902 referenced in your question has a 1/2 inch internal pin diameter. As you mentioned, the outer diameter of the hinge is 1 inch. The steel hinge also features a grease fitting to allow for a long life and smooth operation. I have attached a short video demonstration on this product that you can also check out.
    view full answer...
  • What is the Weight Capacity of the Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
    I checked with the manufacturer, Polar, about the Ramp Door Hinge part # PLR1902 and they unfortunately do not list a weight capacity as much of this would come down to how it's installed, the number used, and the quality of the welding. That said, it has a heavy duty 1/4" pin and it's designed for larger trailer ramp doors so if installed properly it can support a lot of weight.
    view full answer...
  • Availability Of Weldable Ramp Door Hinge Which Allows Ramp Door To Be Removed On a Utility Trailer
    The only ramp door type hinge we have that is weld on with a removable pin is the Aluminum # PLR1005. While the Ramp Door Hinge # PLR1902 you found does not have a removable pin you could weld it to a removable plate on the trailer which would then allow you to remove the entire ramp along with the hinges.
    view full answer...


< Previous
12



Do you have a question about this Trailer Door Hinge?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Amanda M
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<