How Long Are the Cables for the Conventional Ramp Door Spring for 5' Wide Enclosed Trailer

Question

Question:

How long are the cables? The length i need is about 7foot long

asked by: Rigo L

1

Helpful Expert Reply:

The Conventional Ramp Door Spring for 5' Wide Enclosed Trailer part # 362SA5 comes with cables that are 135" long.

expert reply by: Conner L

1

Answer 1

Normally the trailer ramp springs like the #362SA5 attach to the inside of the top of a trailer door like the picture I attached shows. In the picture you can also see how it attaches to the ramp as well.

view full answer...

Answer 2

Yes, it will. You can add the Conventional Ramp Door Spring for 5' Wide Enclosed Trailer item #362SA5 to your enclosed trailer even though it didn't come with one. This fits a 32" to 56" wide trailer door. It measures 56" wide…

view full answer...

Answer 3

If you replaced the springs on your ramp door with the #RS16933RH it would definitely make the door seem lighter. If the shaft diameter that you current spring is installed on is 1-1/2 inch in diameter this would fit and work well. The matching left…

view full answer...

Answer 4

With the cable of the TRC Ramp Spring #362SA5 being 135 inches long, using the form to get the measurements of a right triangle, a^2+b^2=c^2, you will get 67 1/2 inches. This will therein allow for a door that is just over 5 1/2 feet.

view full answer...

Answer 5

We have the enclosed trailer ramp spring part #362SW61 that is 67 inches long which would work well for you and can be shortened to your desired length while retaining the 120 lb capacity. Your other option is to use #362SA5 which has an 85 lb…

view full answer...

Answer 6

Hello Darrin, thanks for reaching out. For your 56" wide door what I recommend is the Conventional Ramp Door Spring #362SA5. This is made for the 56" wide doors, and the 85 lb capacity will make opening and closing the rood much easier.…

view full answer...

Answer 7

Hey David, I am not totally sure which two springs you are comparing but just because a dual spring torsion ramp door spring like the part #ERS160D96 has two springs doesn't always mean it has more capacity than a single spring. The springs can…

view full answer...

Answer 8

I reached out to the manufacturer, who told me the cable was 135 inches long for the Conventional Ramp Door Spring for 5' Wide Enclosed Trailer #362SA5. What you will do is measure from the top of your door down to the bottom of the door and if…

view full answer...

Answer 9

Jared, the 150" long cables that come with the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer #M354FR are unfortunately the only size offered with that part. What you could do instead, is buy the Replacement Cables for…

view full answer...

Answer 10

The spring with the black cable drum should always be mounted to your LEFT, standing on the inside of the trailer looking out. This is very important for proper operation. Dual spring systems, like #ERS160D96, have a red-coned and a black-coned…

view full answer...

How Long Are the Cables for the Conventional Ramp Door Spring for 5' Wide Enclosed Trailer

Product Page this Question was Asked From

Continue Researching