Using One or Two Cables with a Conventional Ramp Door Spring
Updated 11/10/2026 | Published 11/09/2026 >
Question:
Can this be installed with only 1 cable on 1 side of the door or does it need to be installed with cables on both sides?
asked by: Jeremy H
0
Expert Reply:
Hey Jeremy! The Conventional Ramp Door Spring # 362SA5 needs to be installed with cables on both sides of your trailer door. Although it uses a single torsion spring, the two cables work together to provide even lifting support and keep the door from twisting or binding.
Is there something preventing you from attaching a cable on both sides of your ramp door?
expert reply by:
Robin H
0
Product Page this Question was Asked From
Conventional Ramp Door Spring for 5' Wide Enclosed Trailer - Single Spring - 85-lb Capacity
- Trailer Ramp Springs
- Single Ramp Spring
- Torsion Spring
- 135 Inch Cable
- 85 lbs or Less
- Conventional Spring
- 4 Foot Wide Trailer
- 5 Foot Wide Trailer
- 56 Inch Wide Spring
- TRC
more information >
Continue Researching
- Q&A: Weight Capacity Options for a 6 ft. Wide Ramp Door Spring
- Q&A: Choosing the Correct Replacement Spring for an Enclosed Trailer Ramp Door
- Q&A: Looking for Ramp Spring Assist for Gate that Weighs 57 lbs
- Q&A: Pictures for Showing How Trailer Ramp Springs Attach to Enclosed Trailers
- Q&A: Parts Needed To Convert Double Door On Enclosed Trailer To Ramp Door
- Q&A: Ramp Door Spring Recommendation for a 2009 Carson 6x10 Enclosed Trailer
- Q&A: Does Dual Ramp Door Spring Turn Each End Independently
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)



Jeremy H.
11/10/2026
With cables on both sides it just makes it a little more restrictive when stepping up onto the ramp from the sides. My previous trailer had a ramp door spring already installed when I purchased it and only had a cable on 1 side. The ramp door is very rigid and doesn't flex of twist when opening, its just heavy.