1. Trailer Ramp Springs
  2. TRC
  3. Single Ramp Spring
  4. 44 Inch WIde Doors
  5. 70 lb Capacity
  6. Conventional
Conventional Ramp Door Spring for 4' Wide Enclosed Trailer - Single Spring - 70-lb Capacity

Conventional Ramp Door Spring for 4' Wide Enclosed Trailer - Single Spring - 70-lb Capacity

Item # 362SA4
lowest price pledge
Our Price: $121.28
Trailer Ramp Springs
This item qualifies for Free Shipping
Shipping Weight: 12 lbs
Quantity: 
In Stock
TRC Trailer Ramp Springs - 362SA4
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Lowest Prices for the best trailer ramp springs from TRC. Conventional Ramp Door Spring for 4' Wide Enclosed Trailer - Single Spring - 70-lb Capacity part number 362SA4 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (1)
  • Q & A (2)
  • Videos (1)
  • Photos
  • Why etrailer?

TRC Trailer Ramp Springs - 362SA4

  • TRC
  • Single Ramp Spring
  • 44 Inch WIde Doors
  • 70 lb Capacity
  • Conventional
  • 44 Inch Wide Spring
  • 4-7/8 Inch Tall Spring
  • Steel

Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer.


Features:

  • Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury
    • Helps take on the weight of your trailer door so you don't have to
  • Spring reduces wear and helps prevent damage to door hinges
  • System can be modified to fit your specific application
    • Slide the bracket and cable drum down and cut the shaft to a shorter length
  • Sturdy steel construction
  • Made in the USA


Specs:

  • Application: 24" to 44" wide trailer door
  • Dimensions: 44" wide x 4-7/8" tall x 7-1/2" deep
  • Spring capacity: 70 lbs


Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.

TRCSA 4 TRC Enclosed Trailer Ramp Conventional Spring - Single 200 - 42" Wide - Qty 1





Video of Conventional Ramp Door Spring for 4' Wide Enclosed Trailer - Single Spring - 70-lb Capacity

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of TRC Enclosed Trailer Parts - Ramp Door Spring - 362SA4

Ellen: Hey everyone. I'm Ellen here at etrailer.com. And today we're going to be taking a look at the conventional ramp door spring. This is going to be for your four foot wide enclosed trailers, and basically the reason why you'd want this and so that you can take the weight off of that ramp door so you're not having to lift it all on your own. The spring is going to do that work for you. So you can save your back, save your knees, save your head from getting any kind of damage to it, and also keep your hinges and the door itself from getting any kind of damage from accidental falls and anything like that.

So it's going to make life a lot easier with our enclosed trailer. We don't have to worry about lifting that whole weight on our own or getting an extra set of hands to help us do that, should be able to lift that door no problem all by ourselves. So definitely going to make things a little bit easier to work with on that enclosed trailer.It's going to come assembled as you see it with the spring intact, and then our hubs on either side and our brackets as well, has the cable and the two little attachment brackets. To get everything installed, you will need some hardware to actually mount this in place, but since it's going to depend on your situation, the hardware is going to really depend on that as well.Now, one caveat I will say with the install of this, if you haven't ever worked with a torsion spring, it's really best to leave that to a professional, since it can be pretty tricky to do without injury. So something that you definitely want to leave to the professionals if you don't already have any experience with that.

But you can get this a little bit adjusted if you want something a little bit narrower than that four foot length. Typically, that's going to be about the smallest trailer out there, but if your situation calls for that to be dialed in a little bit closer, you can make that adjustment by using a hacksaw and then adjusting everything down.The overall width for our assembly though is going to be 42 inches wide. And then our bracket, from the end of that bracket to the end of our hub, it's about seven and a half inches tall. And then those hubs and selves are about four and seven eighths inches. As far as the construction, it is made out of a sturdy steel.

So shouldn't have to worry about any kind of strength issues. The weight capacity that this can handle is 70 pounds. So should be a pretty good amount of weight to take off of your door, to get that lifted up and back in place, so you don't have to worry about it. But that's pretty much all there is to it for our conventional ramp door spring for four foot wide enclosed trailers. If you need any other information, we do have a lot of articles here at etrailer.com.

We also have other configurations of the spring at longer lengths. So definitely check those out if you're interested. Thanks for watching, and we'll see you next time.


Customer Reviews

Conventional Ramp Door Spring for 4' Wide Enclosed Trailer - Single Spring - 70-lb Capacity - 362SA4

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer.

- 362SA4
by:

902009


1
1

Ask the Experts about this TRC Trailer Ramp Springs

  • Ramp Spring Recommendation for a 33 inch Trailer Door Ramp
    Since you have such a skinny door I would recommend you get a spring assist like the Ramp Spring # 362SA4. This assembly can be cut down to 23-3/4 inches minimum so it will be a great fit for your custom ramp.
    view full answer...
  • Can TRC Enclosed Trailer Ramp Spring Be Cut Down
    An Enclosed Trailer Ramp Spring, like part # 362SA4, can be cut down to fit 23-3/4" to 43-3/8" doors. Ramp Spring # 362SA5 can fit 31-5/8" to 55-1/2" inch doors. They are customizable to fit the space available in your trailer as well as the door size so for your door I recommend # 362SA5. These springs are unique in that they are not the high torsion springs that require professional assistance for installation. They are self adjusting.
    view full answer...

Do you have a question about this Trailer Ramp Spring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer ramp springs for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer ramp spring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Installed by:
Kathleen M
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.