Replacement Tail Lights For An Older Utility Trailer With Recessed Lighting
Updated 02/03/2026 | Published 06/29/2024
Question:
My older utility trailer has right and left 8L x2.5H x 3D lights that need replaced. They each Have one 2057 bulb and 1895 side clearance bulb. They are inset in the trailer. Theres no room to expand the height. Any products that you offer? thank you..Eric
asked by: Eric K
Expert Reply:
Hi Eric,
We unfortunately do not offer a light with this sizing so alterations would have to be made to the cutout hole in order to get these replaced. If you want to pull the lights out and see if there's any labels with a brand and part number it could help tracking down a replacement. If there isn't then you'll need to either cut the hole larger or cover it with a thin gauge piece of steel and make a new cutout hole for a smaller light to fit into. Let me know what you find and what route you'd like to take and I'd be happy to help.
Product Page this Question was Asked From
Over 80", Rectangular Submersible Trailer Tail Light, 2 Wire, 7-Function, Right Hand
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Marker
- Rectangle
- Surface Mount
- Submersible Lights
- Incandescent Light
- 8-1/16L x 2-7/8W Inch
- Red
- Optronics
more information >
Continue Researching
- Video: Optronics Submersible Tail Lights Review
- Shop: Peterson Clearance or Side Marker Trailer Light w/ Reflector - Submersible - Teardrop - Amber Lens
- Shop: LED Combination Trailer Tail Light - 6 Function - Submersible - 12 Diodes - Passenger Side
- Shop: Over 80", Rectangular Submersible Trailer Tail Light, 2 Wire, 7-Function, Right Hand
- Q&A: Incandescent or LED Replacement Boat Trailer Tail Lights
- Q&A: Replacement Optronics Rectangle Trailer Light With Plug-In Style Connector
- Q&A: Matching Right Hand (Passenger Side) Trailer Tail Light for Optronics STST26RPG
- Q&A: Upgrading To LED Trailer Lights For a Heritage Trailer Carrying 2003 Lund Fisherman Boat
- Q&A: 2005 Ranger Trail Boat Trailer Replacement Hub Bearings and Races for Oil Bath
- Q&A: How To Find Brake Controller Wires on 2018 Chevy Express 3500 Without Factory Tow Package
- Q&A: Replacing 10K AL-KO 12-1/4 x 5 Inch Electric Brake Assemblies on Trailer
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Samuel C.
2/3/2026
Hey Eric, what did you end up finding when you pulled the lights from your trailer? Once you know whether there’s a brand or part number, it’ll be easier to figure out the best replacement. Let me know what you find—I’m here if you need a hand narrowing it down.