Product Experts Available Now!
Call 800-298-8924
Trailer Lights
/
Optronics
/
Tail Lights
/
Rectangle
/
LED Light
/
Red
Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side
(50 reviews)
Price: $33.69
In Stock
Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side
Item # RVSTLB61
Our Price: $33.69
Orders above $50 qualify for Free Shipping
Arrives before Christmas with Ground or Free Shipping.
In Stock, Ships Today
- All Info
- Reviews (50)
- Q & A (24)
- Videos (1)
- Photos
- Why etrailer?
Optronics Trailer Lights - RVSTLB61
- Tail Lights
- Rectangle
- LED Light
- Red
- Surface Mount
- 8-1/2L x 3W Inch
- Non-Submersible Lights
- Optronics
- Stop/Turn/Tail
- License Plate
- Rear Reflector
8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Snap-on lens. Mounts on surface of trailer. 3-Wire pigtail.
Features:
- Low-profile RV tail light serves 4 functions
- Stop, turn, and tail
- Built-in license plate light illuminates trailer license plate
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable black ABS plastic base with snap-on lens
- Red and clear lens over white LEDs
- Compatible with 12V DC systems
- Mounts on surface of trailer with built-in license plate bracket - hardware not included
- 3-Wire pigtail
- White wire for ground
- Black wire for tail light
- Green wire for stop/turn signal light
- DOT compliant
- Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
Specs:
- Configuration: driver side
- Passenger side: RVSTLB60 (sold separately)
- Light dimensions: 8-11/16" long x 3-3/16" wide x 2-1/8" deep
- Height with license plate bracket: 5"
- Diodes: 12
- Power draw at 12.8V:
- Stop/turn: 0.243 amps
- Tail: 0.046 amps
- Lifetime warranty on LEDs
RVSTLB61 Optronics Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Red Lens - Driver Side - Left Hand
California residents: click here
Video of Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Trailer Lights - Tail Lights - RVSTLB61 Review
Today we're going to be taking a look at the Optronics Low Profile RV Combination Tail Light for the Driver's Side. This is a rectangular RV light that's going to serve as a break light, turn signal, and tail light and it has the license plate light built in here at the bottom with a nice clear lens. That's going to do a great job at illuminating the license plate. It's also got the license plate bracket built in. We're looking at a red acrylic lens. If you need to replace it, it is replaceable.
It's just a snap-on style. It snaps into place. The unit's going to be an LED system, so it's going to feature long-lasting LED's that are going to make great replacements for incandescent lights. They last longer, they burn brighter, they're much more efficient. You don't have to worry about replacing bulbs and you don't have to worry about brittle filaments. The unit's going to feature a nice black classic housing.
It's got a nice strong and durable corrosion resistant design to it. It is a surface-mounted installation. You've got a total of 4 mount holes, 2 located on each side. To get this mounted you will need to remove the lens. You can simply do that by pushing in on the tabs there on the side. That'll release it and then you can just remove the lens and install your hardware.
Mounting hardware is sold separately. To get the lens back on, it just snaps back into place. It's a 3 wire design. We're going to have our white wire which is ground, black wire which is for the tail light and license plate light, and then green wire which is for our stop and turn signals. The unit is Department of Transportation compliant. It meets FMVSS 108 and CMVSS requirements for automotive lighting.
We're going to take a look at some of the dimensions real quick. I'm going to measure here at the back of the light, just gives us a more square design so we can get accurate measurements. Starting with the overall length measuring from edge to edge. That's going to give us a measurement of about 8 11/16 of an inch long. If I measure the width, not including the license plate brackets, so just this portion right here, that's going to give us a width of about 3 3/16 of an inch wide. Then measuring down to the bottom of the license plate mounting tab is going to be about 5 inches overall width. The depth, how far it's going to stick out from the mounting surface from back to front, that's going to give us a measurement of about 2 1/8 of an inch deep. When it comes to the mount hole separation, these mount holes are going to be separated on center apart from one another going this direction. That looks to be 7 3/8 of an inch. Then going this direction they're going to be separated on center by, looks to be 1 7/8 of an inch. When it comes to the power draw, it's going to be a total of 28 volts for the break and turn lights. We're looking at .243 amps. For the tail light we're looking at 0.46 amps. The light's going to contain 9 LED's right here in the main area. Then 3 more LED's here for the license plate light. We're going to go ahead and hook it up to power, that way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead light so you can see it in a low light setting. You can see here that the unit sends out a nice strong, consistent signal. This is going to be the tail light function. We've got nice light right here in the main body. We also have reflectorized portions of the lens, so that reflector is built into the lens here on the sides. Again, this is the tail light. You can also see that we have the bright LED's right there at the bottom with the clear lens. That's going to do a great job at illuminating the license plate. When we apply our brakes you can see how that signal output increases for a nice strong consistent signal. It's going to do that when we activate our turn signals as well. Optronics is also going to put a lifetime warranty on the LED's. That's going to do it for today's look at the Optronics Low Profile RV Combination Tail Light for the Driver's Side.
Customer Reviews
Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side - RVSTLB61
Average Customer Rating: 4.8 out of 5 stars (50 Customer Reviews)
8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Snap-on lens. Mounts on surface of trailer. 3-Wire pigtail.
- RVSTLB61
by: Rick P08/16/2015
Awesome service, quick delivery 219709
- RVSTLB61
by: patrick b04/15/2017
The tail light I ordered was a replacement for damage light. The quality is great The service at etrailer is very good. The people are very friendly,know what they are doing and make ordering a pleasure. 368045
- RVSTLB61
by: Peter04/03/2018
After ordering the part at a local dealer and getting the wrong light using your service proved correct part, $30.00 cheaper and within same time local dealer would have gotten for me. Thanks and will use you again. 492034
- RVSTLB61
by: RoadtripMojo01/04/2019
Excellent plug and play LED replacement for the cheap factory rear light. 594743
- RVSTLB61
by: Rick07/06/2018
Ordered to replace brake lights on my rv. Realized one had broke on way to campground. Used 2 day shipping and they were delivered on time. Quickly installed at campsite and boy are they bright! Looking forward to the trip home. Maybe now other drivers can see my blinkers when I turn them on! 538464
- RVSTLB61
by: Anthony01/27/2018
I purchase the driver side and passenger side. Good set of lights that directly replaces the original bulb setup. Considerably brighter then the bulbs. Easy install. Make sure you have clear (or color of choice) rtv sealant and your choice of wire connections. This is not included in the package. 470562
- RVSTLB61
by: ejoc4201/31/2017
Replaced OEM incandescent tail lights in a Signature Ultra Lite trailer. The directionals in original lights were barely visible in daylight. the LED replacements are easily seen in sunlight and are exceptional at night. The upgrade was like for like, same screwholes and even used rubber gasket from originals. All in all very satisfied with product and ease of changeover 337393
- RVSTLB61
Grant N - 01/22/2018
33463
by: Grant N01/15/2017
I replaced all the clearance lights and taillights on our fifth wheel camper with these OE style LED versions. They are much brighter and therefore much safer, especially in the case of the tail/brake/turn lights seen elsewhere at etrailer. They should last a lot longer than the original bulb units. I also like the way they look as compared to the old bulb style. Our camper was only a year old, and I don't understand why they all wouldn't come from the factory with LEDs. I installed them all myself without issue. 335555
Comments
Thank you for your follow up. I am still happy with my purchase,although they are installed on a fifth wheel camper trailer that doesnt getused a lot and usually in the daylight hours, so the lights havent got alot of hours on them. So far, so good. Thanks again.
Grant N - 01/22/201833463
- RVSTLB61
by: Timothy09/27/2019
This light assembly was received after being nicely packed. The housing appears to be the exact replacement frame of the old one. The plastic housing seems substantial and was easy to install. The holes in my RV fit this new one perfectly. Wire color code also matched the old light package. Installation was easy, removed old housing, cut the wires to the old housing, cleaned off the old sealant, connected wires to new light assembly, put screws back in, sealed the edges, and tested. Worked very well. Took about 15 minutes from start to finish. Highly recommend eTrailer.com and ask for Noah, he was great in finding what I needed and placing order. Shipping cost was very reasonable too! Tim 708350
- RVSTLB61
by: Stephania09/21/2019
Exactly what we wanted, matched original taillights exactly. Good price and came within three days, THANKS! 706377
- RVSTLB61
by: Michael08/07/2019
Product was as described, with fast delivery from etrailer.com. 682772
- RVSTLB61
by: Ron08/05/2019
I had to replace the right lens/light assembly and after the quick and easy install and look, I decided to go ahead and add the LED driver's side! Looks great and again was very easy to DIY. 680715
- RVSTLB61
by: Eddie07/29/2019
super fast shipping and exact replacement for incandescent lights. 679648
- RVSTLB61
by: Henry07/28/2019
The RVSTLB60 and 61 (left and right) was an exact replacement for my 5th wheel trailer, 2018 Grand Design Reflection 303RLS. Shipped fast and packaged well. 678764
- RVSTLB61
by: Anthony L07/24/2019
Perfect LED replacements for my 2017 Grand Design 315RLTS travel trailer's incandescent lights. These lights fit the existing mounting holes on our camper perfectly and are a huge improvement over the original lights. Another great feature of this light is that it contains a separate set of LEDs for the license plate. 674745
- RVSTLB61
by: Justin07/12/2019
Looks great exact match, recieved it on time and in new condition. I wish every transaction or purchase online went this smoothly, thanks 669496
- RVSTLB61
by: Tammy07/05/2019
Easy to install got them quickly I love them 666770
- RVSTLB61
by: Tom06/10/2019
Easy installation. Bright. Great produ ct. 655960
- RVSTLB61
by: Don03/11/2019
Great product. 610935
- RVSTLB61
by: Rodney12/31/2018
Great light for the price. Nice and bright, easy to install. Works well. 594182
- RVSTLB61
by: Rodney12/28/2018
Still works great a year later. No problems and still doing what it is supposed to. Love our lights. 593707
- RVSTLB61
by: Susan11/23/2018
Prompt fast service. Have used etrailer for multiple items. Great Service! 584795
- RVSTLB61
by: Corey10/11/2018
This light was easy to install and shined a bright light. 573423
- RVSTLB61
Douglas - 07/27/2019
58292
by: Douglas07/27/2018
Exact replacement fit for the OEM incandescent tail/brake lights. The LEDs are MUCH brighter than the OEMs (both tail light and the brake/turn signal) and add an updated look to my RV in addition to the improved safety factor. 546608
Comments
At one point, I had an intermittent problem with the PS tail-light. Traced it to a bad soldered connection, reflowed the solder and all is well since then. Their installation was a good upgrade to my trailer.
Douglas - 07/27/201958292
- RVSTLB61
by: Greg07/24/2018
They're ok, however they don't attach very positive. I had to add a fastener just for peace of mind. Water gets in but they do drain themselves...the lights work great as advertised 545648
- RVSTLB61
by: Kevin06/24/2018
Exact replacement of old lights on a 2017 rockwood signature ultra lite travel trailer. Good color and function . Thank you, Kevin 526079
- RVSTLB61
by: Joseph06/16/2018
Quality LED replacement. License plate is lit by separate LED's, so you don't get the bright/dim effect when applying the brakes and the plate is well lit. 522424
- RVSTLB61
by: Raymond05/18/2018
Easy to install & wiring according to directions. No problems! 510046
- RVSTLB61
by: Richard03/16/2018
New tail lights for the toy hauler. Decided To go with LEDs, really glad I did. Ordered on a Tuesday and they arrived on Friday, excellent service!!! About 25 minutes to change them both, a perfect replacement. 485648
- RVSTLB61
by: Richard03/16/2018
New tail lights for the toy hauler. Decided To go with LEDs, really glad I did. Ordered on a Tuesday and they arrived on Friday, excellent service!!! About 25 minutes to change them both, a perfect replacement. 485784
- RVSTLB61
by: Jason02/08/2018
The lights are way brighter than factory and easy to install. Very satisfied with the lights and quality of them as well. The LEDs are completely sealed inside the housing, adding to overall durability and quality. Highly recommend. 473759
- RVSTLB61
by: Jeff11/20/2017
Great service and nice people to do business with. 453558
- RVSTLB61
by: Chuck T.10/23/2017
I was looking for LED lights and ordered these lights for my fifth wheel, Low profile RV LED tail Lights. The process was easy and tracking my package was a snap. The lights were just as advertised and I installed the same day in 30 mins. I know I will feel safer driving my rig at night with winter coming. 445311
- RVSTLB61
by: Sherry M10/08/2017
Easy to install. Fast delivery 440769
- RVSTLB61
Bob S - 10/01/2018
44204
by: Bob S.09/26/2017
I put these on my 5th wheel camper to replace the originals incandescent lights that from new never looked as bright as they should have been. So I ordered all new LED lights, and so far, WOW!!!!! They are awesome!!!! etrailer is so easy to work with and their follow up from shopping cart to delivery notifications are top notch!! Thank you!!!!!!!! 436588
Comments
Lights are great!! still very satisfied that I replaced the incandescent factory ones with these LED ones. Thanks again guys at etrailer!
Bob S - 10/01/201844204
- RVSTLB61
by: Daniel .W09/13/2017
The holes for the license plate fastener hole could been larger other wise they were good 432062
- RVSTLB61
George S - 07/23/2018
41349
by: George S07/13/2017
Easy install,nice upgrade. 405294
Comments
Easy install, works great
George S - 07/23/201841349
- RVSTLB61
by: Fernando alicea06/13/2017
Great product 392767
- RVSTLB61
by: Oldflyer04/16/2017
Nice product, very well made and very bright. I expect that it will last a very long time. 368228
- RVSTLB61
by: KEVIN O.03/15/2017
Broke my original tail light when washing and waxing the camper. This was a perfect replacment. LED lights are much brighter than orginal one too. 353030
- RVSTLB61
by: George01/02/2017
Easy replacement of incandescent lights on both sides of travel trailer. LEDs are bright and grab others' attention. 329314
- RVSTLB61
by: John E12/23/2016
I haven't installed the item yet so I can't vouch for that although optronics is usually very good. I plan on installing the lights on my travel trailer. Etrailer always does a great job packing and is very quick with shipping and communications. Prices are always great and sales are frequent. 327607
- RVSTLB61
by: John M10/22/2016
The lights I purchased are a great replacement of the originals. Easy to install and much brighter than the old ones. 309698
- RVSTLB61
by: Mikes08/01/2016
Very Bright, So far excellent quality 277941
- RVSTLB61
by: John M.08/20/2015
Replacing higher wattage standard lights. Work as expected. Fast shipping. 220472
- RVSTLB61
by: Bill B07/30/2015
Thanks for the good service. just what I ordered came in just as you told me it would Thanks 215520
- RVSTLB61
by: Marvin B07/20/2015
These lights are exactly what I have been looking for, a direct replacement LED combination light for the OEM incandescent lights on my camper. Shipping was fast and installation was easy, about 30 minutes. 213247
- RVSTLB61
by: lartross05/12/2015
Very good product for the price, delivered quickly. Thank you 192350
- RVSTLB61
by: Bob s.05/06/2015
Lights are excellent .easy to install and they look good 190832
- RVSTLB61
by: Bob D04/11/2015
Easy to install and very bright lights 184768
52
52
Ask the Experts about this Optronics Trailer Lights
Do you have a question about this Trailer Light?
- Recommended LED Lights for 5th Wheel Trailer
- For the best results I recommend going with all-new LED assemblies for your Grand Design Reflection 5th wheel. While replacement bulbs are an option, you are better off going with a new assembly made specifically to optimize LED lights. Additionally, the LEDs on new assemblies have a lifetime warranty while replacement bulbs have just a 1-year warranty.
In terms of brightness levels, brake lights on all vehicles are going to be the brightest because they alert the motorist behind them...
view full answer... - How to Determine Tail Light Replacement for Rockwood Trailer
- Thank you for the photo, and though we have tail lights that will work for you there is unfortunately no database with each part number for each year, make and model of trailer that would allow us to look up what you might have.
Instead, you will need to take a measurement to find a matching light although based on your photo we do have one which looks very similar, the LED RV Tail Light w/ License Bracket - Driver Side # RVSTLB61.
This light measures 8-11/16" long x 3-3/16" wide...
view full answer... - Comparing Brightness of Trailer LED Taillights RVSTLB61, 47-84-610, and DG52720PB
- Of the three lights you mentioned the brightest option is the LED Trailer Tail Light w/ Reflector # DG52720PB as it has the most diodes of all of the lights you mentioned so it will be very bright and easily visible.
All three of them are very bright though and would not have issues with visibility. The thing about LEDs is that they are substantially brighter than incandescent lights so whichever model you chose would still be very visible.
view full answer... - Replacement Trailer Tail Light for SAE Number AISTO1
- The only way will be to replace the entire assembly as the rear back plate is not available by itself. For that you'd need the part # RVSTLB61. The great news is that the price for this is very reasonable and you get an all new assembly.
view full answer... - LED and Incandescent Trailer Tail Lights with License Plate Bracket
- For an LED trailer tail light with license plate bracket we have # RVSTL61 and # RVSTLB61.
For incandescent we have the following:
# RVST51
# 30-92-003
# RVST56
# 30-92-108
# 30-92-004
# 30-92-109
# RVST61
# RVSTB61
view full answer... - Replacement License Plate Bracket/Light Base for Taillight
- I do have an option for you but we do not offer the base/bracket separately, you would need to replace the entire assembly with one of the following based on dimensions.
RV Tail Light - part # RVSTB51 (8-5/8" long x 4-5/8" tall x 2-1/16" deep)
RV Tail Light - part # RVSTLB61 (8-11/16" long x 3-3/16" wide x 2-1/8" deep)
RV Tail Light - part # 30-92-108 (8-9/16" long x 4-9/16" wide x 2-1/8" deep)
RV Tail Light - part # 328-003-81LBM1 (8-11/16" long x 5-1/2" tall x 2" deep)
view full answer... - Solution for Needing Replacement Lens for Trailer Taillight SAE AISTO1
- Since the lens you'd need part number AST50B is no longer available you'd need an all new assembly which for that the best option is the part # RVST50 since you'd basically only be using it for just the lens as this is the most cost effective solution we have.
view full answer... - Largest LED Trailer Tail Light with License Frame Light Available
- The largest LED tail lights we have that have the license plate light are # RVSTL61, in white, and # RVSTLB61, in black. They both measure 8-11/16 by 3-3/16 inches. These are both for the driver's side, the corresponding passenger side lights to these two are the # RVSTL60(white) and # RVSTLB60(black).
These two are slightly larger than the # RVSTLB0061 which is 8-5/8 by 3-3/16 inches.
view full answer... - Replacement Lens for SCHOOLCRAFT MI. NO. 003-81 Tail Lights
- I looked through all of the replacement lenses that we have and none are a match for what you are looking for. I wish I had better news for you.
view full answer... - How To Mount a License Plate On a Haulmark Utility Trailer
- I don't have any information specific to any one particular trailer but what I can tell you is that most license plates are mounted under the driver side tail light. In fact, most driver side tail lights even have a bracket for the license plate as well as a light that points down from the tail light to illuminate the license plate. The Low Profile LED RV Tail Light part # RVSTLB61 for example has the license plate mount and light as mentioned above and can then be paired with the Low Profile...
view full answer... - Recommended LED Trailer Lights to Replace Incandescent Lights
- I may have some replacement LED lights for your trailer but none of the 8-1/2 by 4-1/2 inch lights we carry are LEDs.
The Low Profile LED RV Tail Light # RVSTLB61 for the driver's side and # RVSTLB60 for the passenger's side might work for you.
view full answer... - Recommended LED Trailer Lights To Replace Incandescent Lights
- If you are wanting to go from incandescent lights to LED lights, I recommend the Optronics Low Profile Combination Light like part # RVSTLB61 for the driver side and part # RVSTLB60 for the passenger side.
These lights have similar but not exact measurements as the Bargman lights, part # 30-92-003 you said you have. The Optronics lights measure 8-11/16 inches long, 3-3/16 inches tall and 2-1/8 inches deep. They are about 1/4 inch longer and about an inch more narrow than the Bargman...
view full answer... - Similar LED Version of Peterson Trailer Taillight # V457
- The closest LED trailer taillight to # V457 is the Optronics part # RVSTLB61 which has a license plate bracket or the part number # RVSTLB60 which does not.
view full answer... - Should I Replace My RV Tail Light?
- Definitely just replace them, simply because the product will start rusting and next you may have electrical issues in the future. The RV Tail Light # RVST51 have a 3-Year warranty.
Or if you would like a LED upgrade I recommend # RVSTLB61 and # RVSTLB60.
Or the white base version # RVSTL61 and # RVSTL60.
view full answer... - Availability of Version of Optronics RV Tail Light RVST61 with Black Base
- We do offer a version of the Optronics RV Tail Light # RVST61 that has a black base. That item is part # RVSTLB61 which is a high-efficiency LED version of this same light style. LEDs use about 1/10th the power of incandescent bulb lights. This means an LED version of any given light will reduce your power consumption and waste heat and also be brighter.
You can also save your trailer's on-board battery power by replacing interior light bulbs with LED equivalents. You can see such items...
view full answer... - Converting RVST50 Style Trailer Taillight to LED
- That depends on what taillight assembly your trailer has whether or not an LED is available for it. Could you get me a picture of it by chance.
view full answer... - LED Trailer Tail Lights with a Black Base
- For a black base you can use # RVSTLB60 for the right side of the trailer. For the left side of the trailer use # RVSTLB61.
view full answer... - Solution for Needing Replacement License Plate Bracket for 92 Series Bargman Trailer Taillight
- The license plate bracket of the light that the lens part # 30-92-708 is a designed for is part of the backing plate of the light. If you need that as well you'd the part # RVSTLB61 which is a replacement light assembly.
view full answer... - Recommended Hardware to Install a License Plate on the Low Profile RV Tail Light Part # RVSTLB61
- There is not really any specific mounting hardware to attach a license plate to the Low Profile RV Tail Light part # RVSTLB61. However, I recommend using either a 3/16" or 1/4" phillips head machine screw with lock washer and nut which can be obtained at your local hardware store. The bolts just needs to be tight enough to collapse the lock washer. If you are having issues with the tabs breaking I recommend installing the license plate on the light while it is off the trailer. Also if you...
view full answer... - Replacement Trailer Clearance Light for Reflect O Lite Number 8
- Yes, the Peterson Clearance or Side Marker Trailer Light w/ Reflector # 423000 matches exactly what you need. It's 4 inch long by 2 inch wide and has mounting holes that are 3 inches apart on center.
view full answer... - Tail Light Back Clip Replacement for RVSTLB60
- The only replacement part available for these lights are the replacement lens and not the black back plate with clips for the Optronics Low Profile lights, so your best solution is to replace whole light. For LED lights you need # RVSTLB60 (passenger side) or # RVSTLB61 (driver's side). For Incandescent lights use # RVSTL60 (passenger) or # RVSTL61 (driver).
view full answer... - How to Determine if License Plate Light is Wired Incorrectly
- Thanks for the detailed description and based on that you did wire the Low Profile LED RV Tail Light w/ License Bracket # RVSTLB61 incorrectly. While it is tempting to match wire colors, you need to match the wires by the function of the trailer lights. The black wire of this light is the tail light and the green is the stop/turn signal light so if you reverse that wiring you will be hooked up correctly.
I have added a link to a help article on trailer wiring for you which I recommend...
view full answer... - Availability of Replacement Bracket for Optronics RV Tail Light # RVSTLB61
- I believe you are referring to the plastic bracket/tabs that are on the back of the Optronics RV Tail Light # RVSTLB61. This piece is not available as a separate replacement part so if your bracket is broken then the entire assembly will need to be replaced.
This particular light assembly is for the driver's (left) side and it measures 8-11/16" long, 3-3/16" wide, and 2-1/8" deep. I have attached a short video review that you can check out as well.
If instead you are referring to...
view full answer... - How To Determine How to Wire New Lights
- Wire colors are not universal so the only way to determine how to wire up your lights is to use Circuit Tester # PTW2979 to find out the functions of your wires and hook up your lights accordingly. I could not find an order number for you so I can't determine which lights you purchased from us that you are looking for specific help with.
For example, the LED RV Tail Light # RVSTLB61 and # RVSTLB60 have a white wire for a ground wire, a green wire for the tail light and black wire for...
view full answer...
Do you have a question about this Trailer Light?
Why etrailer.com?
At etrailer.com we guarantee:
Highest quality trailer lights for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer light information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Satisfaction Guarantee
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Written by:
Laura H
Installed by:
Cole B
Updated by:
Amy B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.