Replacement Amber Lens for MC32AB Trailer Lights

Ask the Experts about this Optronics Accessories and Parts

• Replacement Lens for Optronics Part # 20327-02
  The "20327-02" light base is a rectangular shaped clearance light measuring 4" long x 2" wide which was made by Optronics. The light has since been discontinued along with the replacement lens but we have had customers use part # A32RB for a red lens or part # A32AB for an amber lens as a direct replacement.
  view full answer...
• Replacement Light for Optronics Red Clearance Light 20327-02
  Optronics discontinued their light model 20327-02 some years back and we no longer have lens or base parts for it. You can instead use part # MC32RB for an incandescent light or part # MCL32RB for a high-efficiency LED type. Both have a white base.
  view full answer...
• Replacement Lens for Trailer Light 22368-022
  I had a hard time finding a lot of information using the two part numbers you found both on the lens and the light base. It looks like the base number may refer to the Optronics Trailer Light # MC32AB, for which the correct replacement lens is part # A32AB. To be sure you can take a couple quick measurements on your existing lens. This lens measures 4 inches long, 2 inches wide, and 1/2 inch tall. If this does not look to be the correct lens please feel free to email me a picture...
  view full answer...
• Replacement Amber Lens for 4 Inch Wide Trailer Clearance Lights
  If you can provide me with a photo that lists the length, width, and height of the replacement lens you are looking for I would be able to offer a better recommendation for you but based off of the above information, we have part # A32AB which is an oval amber replacement lens or part # A44AB which is a rectangular amber replacement lens. Both of the above lens measure 4" wide. The oval amber lens is designed for part # MC32AB and the rectangular lens is designed for part # MC44AB.
  view full answer...
• Replacement Amber Lens for Clearance Light on 2003 Coachmen Clipper Pop-Up
  Yes, # A32AB is the replacement lens you need for the amber clearance light on your 2003 Coachmen Clipper Pop-Up. I'll pre-warn you that the replacement lenses can be a snug fit. Over the years, the lenses loosen and it is usually easier to get the old one off than it is to put the new one on. I usually just hit the corner of the lens with the heel of my hand and it clicks into place. When changing this lens you will probably notice how faded the old one looks. They are so reasonably...
  view full answer...
• Will Replacement Amber Lens # A32AB Fit Side Marker Light # MCL32ABB
  Optronics does not list a replacement lens for marker light # MCL32ABB so the only option is to use # A32AB which will fit your light housing. The other option is to replace the whole light with a new one.
  view full answer...
• Replacement Lens for SAE A-P2 DOT 14
  What is the part number on the base of the light? The base is the part that holds the bulb and mounts on the trailer. This will be the number I need to find a replacement as the SAE number you provided is for DOT purposes and does not have much bearing on the correct replacement lens. If there is no part number on the base then please send me a photo with some measurements and I would be happy to see if we have a replacement lens for you but if not I have attached our options for you.
  view full answer...
• Correct Replacement Light for Trailer Light Base Part # 1A-S-9
  If the base of your marker light, # 1A-S-9, is part of the Kaper II Trailer Light # 1A-S-100A, then the correct replacement base is the Optronics Rectangular Marker Light, # MC32RB. This marker light comes with a red lens and the replacement red lenses are # A32RB. The replacement lenses # A32AB that you referenced are the amber replacement lenses.
  view full answer...
• Replacement Red Lens for Optronics MC32 Series Trailer Light
  Yes, we do have the red version of the amber replacement lens part # A32AB. You will want part # A32RB.
  view full answer...
• Locating Replacement Tail Light Lens for 1987 Winnebago Chalet
  We do have a large selection of replacement lenses available for trailer tail lights. In order to determine the correct replacement lens for your Winnebago, I recommend taking a few measurements on the existing unit. Also, if you are able to locate a part number for the light assembly, this will also help with tracking down the appropriate part. Unfortunately, trailer manufacturer's don't often keep an accurate record of the smaller parts they install at the factory, so I am unsure...
  view full answer...
• Replacement Amber Lens, # A32AB Recommendation for a SAE-A-P2-DOT-02 Stamped Lens
  Its hard to see, but if you zoom in really close on the picture I attached you will see that the Replacement Lens part # A32AB that you referenced has the SAE-P2-DOT-02 stamped on it so yes, it would work as a replacement for you.
  view full answer...
• Locating Replacement Glo-Brite Lens on Trailer Tail Light
  I was able to trace the 1235-x part number you provided in your question to a Glo-Brite light assembly, but I was unable to locate the actual dimensions and color of the lens. Glo-Brite is no longer in business, so an exact replacement lens might be difficult to find. With this in mind, your best option might be to replace the entire tail light assembly on the trailer. If you can tell me the dimensions of your current lights, I will be happy to make a specific recommendation. I have...
  view full answer...
• Replacement Lens for Bargman 59 Series Clearance Lamp
  We have the exact replacement for the broken lens on your 23RS Outback, part # 34-59-012. The lens you mentioned, part # A32AB is manufactured by Optronics so I couldn't say it it'll fit your Bargman lamp. I'd recommend going with the # 34-59-012 is the fit is a sure thing.
  view full answer...
• Is a Foam Gasket Available for Optronics MCL44 or MCL32 Series Side Marker/Clearance Lights
  Gaskets are not available but all you will need is some gasket maker, # LT37467, or silicone sealant # 0160297, for a good seal. Either of these products would work much better than a foam gasket. And since the lights you are looking at are LEDs they are going to last a much longer time than incandescents so you are likely not going to need to remove the lights.
  view full answer...
• Red Lens Replacement Sae-a-p2-dot-14 For A 2018 Keystone Camper
  The Replacement Amber Lens for MC32AB Trailer Lights # A32AB is a direct replacement for the Sae-a-p2-dot-14 that measures 4" L x 2" W x 1/2" H. A red lens replacement with the same dimensions is the LED Trailer Clearance or Side Marker Light w/ Reflex Reflector # MCL32RB. Included are video resources with more information from here.
  view full answer...
• Replacement Taillight Lens Recommendation for Trailer Light Marked SAE-A-P2-DOT
  We have just the lens you are in need of. You'd want the part # A32AB which matches what you sent in a picture of.
  view full answer...
• Replacement Amber Lens for MCL0032ABB Clearance Light
  The mcl0032abb 4x2 inch side marker light you referenced will allow for the Replacement Amber Lens for MC32AB Trailer Lights # A32AB according to the manufacturer. It is the replacement lens for that unit.
  view full answer...
• Replacement Lens for Clearance/Side Marker Light for a 2001 Coleman Pop-Up Camper
  If the light on your 2001 Colman pop-up camper is an Optronics # MC32AB or a Peterson TW2549A this replacement lens # A32AB is the correct fit. If you are not sure which light you have the number might be on the housing somewhere, likely the back, but not on the lens. That is a different number. If there are no part numbers on the light housing then I would need to know the dimensions of the light you have to determine if this or another lens will fit.
  view full answer...
• Replacement Amber Lens Needed for 20327-02 Base on a 2018 Forest River Heritage Glen
  The number 20327-02 on your light is a discontinued Optronics light base number but it should measure 4" long by 2" wide. If this is the case then you should be able to use the amber lens # A32AB which we have had customers report to say that it has worked.
  view full answer...
• Would the Bargman LED Upgrade kit part # 47-59-012 work on an Optronics Light part # MC32AB
  The Bargman LED Upgrade kit part # 47-59-012 that you referenced will work on a 2x4 inch Optronics light like part # MC32AB. I went an pulled both of these parts from our warehouse to test for compatibility and it worked just fine.
  view full answer...
• LED Replacement Clearance Lights for 2005 Nash Travel Trailer
  LEDs are a great choice for upgrading your trailer lighting for both their efficiency and long life. I checked the Northwest website (the maker of Nash trailers) for information on the lighting used on their various trailers but I was not able to confirm the part number A-S-9. The incandescent lights that you referenced, # MC32RB and # MC32AB, measure 4 x 2 x 1-1/8-inches. We do offer LED lights from Bargman that are similar in size. Part # 47-59-001 is a sealed red lens LED clearance/marker...
  view full answer...
• Recommended Replacement Lens For Optronics Clearance or Side Marker Light MC32AB
  I pulled one of the Trailer Clearance or Side Marker Light, part # MC32AB from our warehouse. You can remove the lens by using a very small screwdriver and prying it. I recommend moving the screwdriver along the seam to make sure you do not break the lens on the light. Once you have the lens off you can order a replacement like part # A32AB. You can just snap the replacement lens back in place. The mounting holes are inside the assembly, so if you need to replace the light assembly...
  view full answer...
• How Thick is the Plastic Used to Make Replacement Amber Lens for MC32AB Trailer Lights
  I went out to the warehouse and pulled lens # A32AB to measure how thick it is. I used a set of digital calipers to measure and the wall thickness is just under 1/8 inches thick (0.107). Based on what you need this does not appear to be the correct lens. If you can get the model number of the light off of the light housing, that may reveal the proper lens.
  view full answer...
• Is Optronics Replacement Amber Lens, # A32AB Interchangeable with Bargman 59 Series Lenses
  The Replacement Amber Lens, # A32AB, will fit the Bargman if the lens is 4 inches long by 2 inches wide by 1/2 inch deep. These are the dimensions of just the lens, not the housing.
  view full answer...
• How To Tell If A Trailer Light Lens Will Fit On A 2002 Coleman Pop-Up Camper
  You will need to measure the lens that you are replacing or if you can get the part number from the light housing on the Coleman pop-up camper. The trailer light lenses are not listed by the brand of trailer. They are listed by size and part number of the trailer light it will fit. The Replacement Amber Lens for MC32AB Trailer Lights, part # A32AB, is 4 inches long by 2 inches wide by 1/2 inch deep. It fits the Rectangular Trailer Clearance, Side Marker Light with Reflector- Amber, part...
  view full answer...
• Replacement Amber Trailer Light Options For Different Shape And Style
  For your replacement amber lens, we will have to go off of your style of light, color, and measurements. There are many lights that meet the standards you listed, but the measurement will help us with the replacement lens or replacement light you need. I've added a link to our page to assist you with finding the proper fit amber light/lens. We have various shapes and styles. You may be interested in Rectrangular LED lights, like the Rectangular LED Trailer Clearance and Side Marker...
  view full answer...
• Will Amber Lens fit 2016 Heartland North Trail?
  The Trailer Clearance or Side Marker Light # MC32AB may fit your 2016 Heartland if the mounting hole dimensions are the same. This light has 3" center to center mounting hole dimensions and a 1/4" mounting hole diameter. I've added links to video reviews of this light for you to take a look at.
  view full answer...
• Replacement Lens for 2016 Starcraft Launch Ultralight RLS
  The amber clearance lens you referenced, part # A32AB, is a replacement lens for Optronics clearance light # MC32AB which measures 4" L x 2" W x 1-1/8" D. This light is an exact replacement for Peterson model number TW2549A. You will want to check your existing light clearance lights for the model number to see if it is a match or else you can go by the dimensions (see image.)
  view full answer...
• Lens Replacement Recommendation for SAE Number SAE-AP2-05
  The SAE number of a trailer light isn't always the best way to pick out a replacement light since that isn't a part number. But most likely you are looking for a # A32RB which measures 4 inch by 2 inch for red and part # A32AB for amber. If you have something different email back with a pic and I'll take a look.
  view full answer...
• Dimensions of Optronics Replacement Light Lenses A32RB and A32AB
  Red lens part # A32RB fits an Optronics light # MC32RB and measures 4 L x 2 W x 1/2 D. Amber lens part # A32AB fits their # MC32AB and measures the same.
  view full answer...

Do you have a question about this Accessories and Part?