LED Clearance or Side Marker Light with Chrome Bezel - 2 Diodes - Rectangle - Amber Lens

LED Clearance or Side Marker Light with Chrome Bezel - 2 Diodes - Rectangle - Amber Lens

Item # 328-003-19A

lowest price pledge

Retail:$8.00

Our Price: $5.26

You Save: 34%
Trailer Lights

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.1 lbs

Quantity: 
In Stock, Ships Today
Command Electronics Clearance Lights - 328-003-19A
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Clearance Lights
  • Rectangle
  • LED Light
  • Amber
  • Surface Mount
  • 3L x 2W Inch
  • Non-Submersible Lights
  • Command Electronics
3-1/4" x 1-13/16" Rectangle. Trailer light serves as either a side marker light or a clearance light. Durable polycarbonate base and acrylic lens. Surface mount with included chrome bezel and hardware. 2-Wire pigtail. P2 rated. Lowest Prices for the best trailer lights from Command Electronics. LED Clearance or Side Marker Light with Chrome Bezel - 2 Diodes - Rectangle - Amber Lens part number 328-003-19A can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Command Electronics Trailer Lights - 328-003-19A

3-1/4" x 1-13/16" Rectangle. Trailer light serves as either a side marker light or a clearance light. Durable polycarbonate base and acrylic lens. Surface mount with included chrome bezel and hardware. 2-Wire pigtail. P2 rated.


Features:

  • Small trailer light serves as either a clearance or side marker light when properly mounted
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable plastic base with acrylic lens
  • Amber lens with amber LEDs
  • Compatible with 12V DC systems
  • Mounts on surface of trailer with included chrome bezel and hardware - no cutout required
  • 2-Wire pigtail - includes power lead and ground wire
    • #10 Ring terminal on ground wire
  • DOT and SAE compliant
  • P2 rated


Specs:

  • Overall dimensions: 3-1/4" long x 1-13/16" tall x 7/8" deep
    • Lens dimensions: 2-1/2" long x 1" wide
  • Distance between mounting holes (center to center): 1-7/8"
  • Diodes: 2
  • Wire length: 7"
  • 1-Year limited warranty


Command Electronics 003-19A Amber LED Clearance or Side Marker Light with Chrome Bezel Measurements

P2-Rated Lights

Diagram of light spread for P2 rated light

A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.


Surface-Mount Light

Surface Mount Trailer Light Installation Diagram

Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.



003-19A Command Electronics LED Clearance or Side Marker Light w/ Chrome Bezel - Amber Lens - Surface Mount - P2 Rated







Video of LED Clearance or Side Marker Light with Chrome Bezel - 2 Diodes - Rectangle - Amber Lens


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Command Electronics LED Clearance or Side Marker Light Installation

Speaker 1: Today we're going to take a look at, and show you how to install, the Command LED clearance, or side marker, light with chrome bezel offering two diodes and a red lens, part number is 328-003-19R. Here you can see our light installed. I really like the chrome bezel the way it comes around there. I think it gives the light a nice look. We've got our two attachment points there. Really, a straightforward easy light to install.

You're going to have two wires, one for ground, one for power. Now, you'll notice this is an LED light. I really like the idea of the newer LED lights that we see going on a lot of trucks and trailers.Basically, they're going to last a lot longer. You're not going to have to worry about those filaments breaking and having to go through the bulb changes. Also, they don't use as much energy, so we're not drawing as much power from the vehicle.

And, overall, nice and clean and bright light. You'll be able to see it from a long way and it can really update the look of a truck or trailer.All of those same things can be said for the amber light. The amber light should be in front of your tire on your trailer or, of course, on the front of your trailer for clearance lights. There's lots of little different uses for the amber light. Here, we're doing it on the front corner of our flatbed.

Now, the red lens and amber lens are going to be sold separately, of course. Really, we like to replace them in pairs, so you can keep the look of it the same. Especially if you're going from an incandescent light to an LED, there can be a big difference in their looks.Now, to give you an idea on dimensions. It's going to be three-quarters of inch from the front edge of the light to the back. From the very bottom of our bezel to the top, we're looking at about an inch and thirteen-sixteenths.

It will stick up, off our mounting surface, by about seven-eights of an inch. Also, the screw holes for our attachment points, these are going to be on one and seven-eighths inch centers.Now, we're going to take our light. We want our wires to go through our mounting surface, there. You see, we've got a couple holes drilled out there. Now, these lights are going to come with sheet metal screws. I think in a lot of applications those are going to work out well, but, for one, our holes are a little bit too big for these to work. You can see they just pass through. But, also, going through a piece of steel this thick, you're going to have a challenge with these. So something else we found that work, little pan-head screws, or little pan-head bolts. These are a number six. You see, they fit in there really nicely. We're using stainless steel just to eliminate any issues with rusting and that. I'm going to place those through. On the backside we're going to put on a flat washer. We're going to put on a lock washer. And we're going to put on a nut.Now, on one of your two bolts you want to place on the ring terminal for your ground. We'll place it right over and we'll put on our washers. Again, we're using a flat washer and a lock washer. We can place on the nut. Do the same for the other side, there. We're just going to use our Phillips to get that tightened down. All right, nice and secure. Last thing we'll need to hook up is our power lead. That's going to go to our running light wire, right there. We'll just tie that in, right there. We'll trim our running light wire. Let's strip both of these back. Now we're going to take the ends of those and we're going to twist these together. Now, this is going to be in lieu of a quick splice connector. We're just going to use a butt connector to make a slice. The quick splices seem to damage the wire. It just doesn't give us the best results, so we're going to use part number D-W-0-5-7-4-4. That's a heat shrink butt connector. They do a great job of preventing any moisture or dirt from getting in there, which eventually causes corrosion and then failure.Now, the other side, we're just going to continue our running light forward for any other lights we might have. Now, you see I've stripped that one back about twice as far as normal. I'm going to double that over and that will go in the other side of our connector, there. Then we'll be able to crimp it down. We'll use our heat source to shrink this down. You can use a heat gun, you can use a mini-torch, or generally I just use a lighter. And we just want to gently heat this up and we'll see it start to shrink. It clears too, or turns sort of clear, then eventually that's going to shrink down. It's going to grab a hold of that wire and the wire looks like it gets bigger. The key is here not to over heat these. You can see it looks like that wire is magnified. We've got a little bit of that clear gel coming out of the end, means we've got it done properly.You want to use an amber lens on our truck. The installation process is going to be exactly the same though. Now, to test out our installation, let's just turn on the running lights. As you can see, they come on nice and bright. We'll do the same for our amber light up front. All right, everything is working properly.That will complete our installation of the Command LED clearance, or side marker, light.

0
0

Ask the Experts about this Command Electronics Trailer Lights

Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Cole B
Installed by:
Randy B
Edited by:
Daron K
Video Edited:
Zach D
Written by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924