2-1/2" Long x 1-1/8" wide. Waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. Amber polycarbonate lens. Surface mount - horizontal or vertical. 2-Wire pigtail. P2PC rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at and installing the mini LED trailer clearance and side marker lights with three diodes and an amber lens. We'll be installing the light in conjunction with the black chrome gasket as well as a snap-on polished chrome ring.This is what our light looks like installed. This would be a great choice for you if you needed to replace your light or even upgrade. The LEDs last a lot longer. As you can tell even in a bright room it puts out a significant amount of light.The light itself is 2-1/2 inches long, 1-1/8 inch tall and 5/8 of an inch thick. The measurement from center point to center point here in the screw holes is 1-3/4 inch.
The light is DOT compliant. You can mount the light horizontally or vertically. One thing I really like about the light is that it's LED, which means it's pretty much maintenance free, so once you install it you don't have to really worry about it.Speaking of installation, let me show you how to do that now. The back side of the light has two wires coming from it, both the power and ground wire, and it is sonically sealed. What that means is there's sealer around this circuit board here, so it is waterproof.
However, we don't recommend submersing it for a long period of time or having the light turned on when you're doing that.The first thing you want to do is check your mounting surface and kind of eyeball just to make sure that all your holes are going to line up and that you have the center hole. That way you can feed your wires through. If you need to make any adjustments or drill new holes, go ahead and do that now.If you're installing it with the foam gasket you would run your wires through the center hole and then through the mounting hole. If you're using it with a gasket and a chrome bezel, you'd simply put the chrome bezel over both of them and run your wires through.All right, next we need to identify our trailer's power wire, which we have here. We're going to connect this to our light's power wire, which is the black right here.
We're going to be doing that with a heat shrink butt connector, which you can find on etrailer.com, and crimp that down. Now we can use a heat gun to shrink our heat shrink here at the ends.Now using your existing hardware, or even some new hardware you pick up from your local store, we're going to secure our light to the trailer. With everything connected and secured, we went ahead and zip tied our wires up and out of the way. That way they're not bouncing around. The next thing we want to do is put power to the light to make sure it works.
As you can see, it does here.That will finish up our look and install on the mini LED trailer clearance and side marker lights with three diodes and an amber lens.
Average Customer Rating: 4.9 out of 5 stars (18 Customer Reviews)
2-1/2" Long x 1-1/8" wide. Waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. Amber polycarbonate lens. Surface mount - horizontal or vertical. 2-Wire pigtail. P2PC rated.Great product and looks perfect on new finders. Easy install and only be sure correct polarity is verified.
This is not what I wanted..... Not the normal Amber side marker that I use.....I ordered it by mistake.....But the reason is.....I can't see the back side. The pt# I wanted is MCL13A2B It has the Black plastic on the backside.....But can't see that in this pix.
I used them anyway......I had no choice....Job had to get done.
I've been using the others for 15yrs now and Never a failure.
Product was very easy to install, very well built and looks good on my trailer
Great products and great service from e trailer!
Nice and bright
I used these to replace single LED "gum drop" 1" lights. Worked great!
Very good service
Delivery is fast and perfect
Pleased with products
Oder was held due to back order. After some emails back and forth I was given an upgraded part free of charge
Even being held up a day, they did their best to accommodate
Win in my book
Very bright easy to install
matched exactly. Thanks
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.