1. Trailer Jack
  2. Fulton
  3. Side Frame Mount Jack
  4. 1500 lbs
  5. Sidewind Jack
  6. No Drop Leg
Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs

Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs

Item # FXP15W
lowest price pledge
Retail:$176.85
Our Price: $141.78
You Save: $35.07
Trailer Jack
This item qualifies for Free Shipping
Shipping Weight: 14 lbs
Quantity: 
In Stock
FXP15W - Sidewind Jack Fulton Trailer Jack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

With corrosion-resistant zinc plating, a durable, poly wheel base and 14-1/2" retracted height, this swivel jack is perfect for marine and other recreational applications. Measures 12-1/2" from mounting bracket to top of jack. Lowest Prices for the best trailer jack from Fulton. Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs part number FXP15W can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (53)
  • Q & A (47)
  • Photos
  • Why etrailer?

Fulton Trailer Jack - FXP15W

  • Side Frame Mount Jack
  • 1500 lbs
  • Sidewind Jack
  • No Drop Leg
  • Weld-On
  • Fulton
  • Swivel Jack - Pull Pin
  • 10 Inch Lift
  • With Wheel

With corrosion-resistant zinc plating, a durable, poly wheel base and 14-1/2" retracted height, this swivel jack is perfect for marine and other recreational applications. Measures 12-1/2" from mounting bracket to top of jack.


Features:

  • Ideal for marine and recreational use
  • Fits all mounts up to a 3" x 5" trailer frame
  • Convenient, spring-loaded, plunger-pin swivel feature
    • Swing up to stow parallel to tongue for travel
    • Move back into upright position for use
  • Z-Max 600 zinc finish provides superior corrosion resistance
    • 600-Hour salt spray rating
  • Bolt-Thru mount provides minimum deflection and maximum support
    • 3-D Formed, heavy-gauge steel stampings
    • Proprietary bushing material
  • Heavy-gauge steel construction
  • Weld-on bracket sold separately
  • Sidewind design
  • Thermoplastic wheel and mounting bracket included


Specs:

  • Application: 3" x 3", 3" x 4", or 3" x 5" trailer frames
  • Bracket height:
    • 14-1/2" Retracted
    • 24-1/2" Extended
  • Lift: 10"
  • Clearance: 12-1/2" from mounting bracket to top of jack
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Pull pin diameter: 1/2"
  • Wheel diameter: 8"
  • Lift capacity: 1,500 lbs
  • Uses an 8 pitch acme screw
    • Takes 8 turns of the handle to raise or lower the jack an inch
  • Limited 5-year warranty


XP15W 0301 Fulton Marine and Recreational Bolt-Thru Swivel Jack, Sidewind, 10" Travel, 1,500 lbs




California residents: click here



Customer Reviews

Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs - FXP15W

Average Customer Rating:  4.9 out of 5 stars   (53 Customer Reviews)

With corrosion-resistant zinc plating, a durable, poly wheel base and 14-1/2" retracted height, this swivel jack is perfect for marine and other recreational applications. Measures 12-1/2" from mounting bracket to top of jack.

- FXP15W
by:

Exact match and fit, thank you! 872886



- FXP15W
by:

Easy to use, install and maintain. Price was optimal and delivery time was excellent. 857078



- FXP15W
by:

needed a direct replacement for my boat trailer. It was a perfect match for what i needed. thank you for the info and proper replacement part 804861



- FXP15W
by:

This Fulton Trailer Jack was a perfect replacement match to my Supra (Boat Mate) trailer. The etrailer website fully detailed the jack description's, it made it very easy to select the correct one. I ordered and received the product within the week. Great company and great website, I would recommend them to anyone! 770496



- FXP15W
by:

I didnt realize how bad my jack was until I replaced it with this unit. Fit perfectly, and seems like a solid product. Fast shipping too! 769812



- FXP15W
by:

Just started ordering product from this company and it has been a fantastic experience! They carry things I cant find anywhere else, delivery is quick and the products have been great along with contact to me making sure everything was as expected. LOVE IT 749289



- FXP15W
by:

Super fast shipping 730772



- FXP15W
by:

Very fast delivery. Will do business ag ain 669541



- FXP15W
by:

Very fast delivery. Will do business ag ain 669540


Comments
Excellent
Dan m - 07/13/2020

91888

- FXP15W
by:

I was very pleased to find a replacement jack for my new to me trailer. It was just what I was looking for and got it right away. 659597



- FXP15W
by:

A great replacement for my Fulton Magnum trailer jack. Has a grease zerk for the gears and a beefier wheel. One nut to remove and replace the jack using my existing bracket. 659543



- FXP15W
by:

Great product only suggestion maybe to have part number stamped to make ordering easier as all the measurements taken I still ordered wrong one ( my fault) but will work just fine 654895



- FXP15W
by:

Shipping was fast and was exact replacement of the original. Cheapest price locally or online. 598695



- FXP15W
by:

Awesome delivered to my front door and bolted right up.Great upgrade 572187



- FXP15W
by:

Sturdy and smooth. I’m satisfied with this product. 571795



- FXP15W
by:

We love this company! We have used it twice and they process the order quickly and the product arrived a day early this time. We purchased this trailer jack to replace the previous one that fell apart on the extremely rough highway from West Virginia to Central PA. My husband has called in the past for help and gets a live person who is very helpful. Wonderful of them to follow up after the product is delivered as well. Thank you so much it seems it is harder and harder to find a company that cares. 560365



- FXP15W
by:

Just wanted to thank Bob Gisi at etrailer in Wentzville for the great help and fast service. Got my 1500# Fulton trailer jack the next day, Fit perfect and installed with ease. Thanks Bob, you treat me like family ! I will ordering again soon. 560355



- FXP15W
by:

Product was available and delivered on time. Appreciate the fair price and the product is still working after a year. 545602



- FXP15W
by:

Had to back order a very hard to find jack stand They got me one weeks sooner than expected Outstanding customer service with a personal touch Thank You 541300



- FXP15W
by:

My old part was worn out and felt a new versus rebuilt was the way to go. This bolted on in a few minutes and worked perfectly on my boat trailer. Much easier and not that much more expensive than rebuilding the old one. Has been in service for a year and a half with it operating flawlessly when used. 434297



- FXP15W
by:

product came well packaged and in just a couple of days thanks etrailer will buy again soon!! 396814



- FXP15W
by:

I don't know why my trailers are always getting beat up but etrailer always has good products that work at an affordable price. Thanks etrailer 358781



- FXP15W
by:

Part was delivered just as promised. Actually arrived sooner than I expected. Bolted right up with no problems at all. Highly recommend etrailer! 356090



- FXP15W
by:

Excellent product. Excellemt service. Very smooth and strong. Lifts boat trailer with no problem. Highly recommend. 343351



- FXP15W
by:

Great product. Got 15 years of reliable service from the last one. 335527


25
53
Show More Reviews

Ask the Experts about this Fulton Trailer Jack

  • Loose Fulton Magnum Series Swivel Trailer Jack on 2002 Ranger Boat Trailer
    Your best bet is going to be hardware kit # F0933325S00. The bolt is a 1/2 inch coarse threaded bolt with matching nut and bushing. But it sounds like the nut or bolt is backing out on your assembly. This could mean the lock washer is shot. You could obtain one locally or use some blue Loctite # LT37643 to prevent it from backing out. Do you notice any damage to the assembly? Or is the hole where the bolt goes through starting to get egg-shaped or otherwise misshapen? If so then that...
    view full answer...
  • Recommended Replacement Jack for Shelby Trailer Jack
    The Fulton Bolt-Thru Swivel Marine Jack # FXP15W is a bolt through replacement option for you. This is designed to use a welded plate like the Jack Mounting Bracket for Fulton Marine Jack # P9012-00. It appears like you have a bolt that goes into a threaded plate, so the reverse of this assembly. If that is the case, I believe this jack will still work, but you will need to put the bolt through the jack first and then thread the bolt once behind the jack into the welded plate.
    view full answer...
  • Bracket for Mounting Fulton Trailer Jack
    Fulton marine jacks mount to a bracket that has holes that are 3 inches apart on center, the Jack Mounting Bracket for Fulton Marine Jack - Weld-On # P9012-00. There isn't going to be a way to mount a Fulton jack like the Fulton Swivel Jack # FXP15W to a bracket with different mounting holes. So the only suggestion I can offer is to have the new bracket welded on, and ensure your current jack will work with one that uses these same mounting holes.
    view full answer...
  • Mounting Plate Recommendation for Fulton XP Trailer Jack
    The picture you submitted looks like the mount of a Fulton XP jack part # FXP15W. Which if you are looking for a replacement mount you'd want the part # F500349.
    view full answer...
  • Replacement Jack for Bulldog BD154107
    In terms of a direct replacement for the same mounting method as your Bulldog # BD154107, you'll want to use the Fulton # FXP15W . which will bolt on to your existing welded on jack mount and comes with a wheel. The main difference between these two jacks is that the tongue weight capacity of the Fulton # FXP15W is only 1500-lbs, as opposed to the 2000-lbs of the Bulldog jack you're replacing. As long as the tongue weight of your trailer is less than 1500-lbs though it shouldn't be an issue.
    view full answer...
  • Bolt Through Trailer Jack Replacement
    I recommend Dutton-Lainson Round Swivel Jack w/ 2" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs Item # DL22210. This jack allows you to bolt through the frame however, it comes with brackets that will fit where your existing jack sits. The mounting holes on the plate are 5-1/2" x 3-1/2". I have provided a link to a review video so you can take a look at it.
    view full answer...
  • Mounting Bracket for Fulton Bolt-Thru Swivel Marine Jack
    Thank you for your purchase! If your Fulton Bolt-Thru Swivel Marine Jack # FXP15W does not correctly fit your mounting bracket you will need to replace that bracket with the Jack Mounting Bracket for Fulton Marine Jack # P9012-00 which attaches to the jack.
    view full answer...
  • Recommended Replacement for Fulton Magnum Series 1,500 Pound Trailer Jack
    To replace your older Fulton Magnum Series 1500 Pound Jack, I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXP15W. This 1,500 pound swivel jack is what Fulton replaced the Magnum Series with, so it should use the same mounting design as your existing unit. It fits the Jack Mounting Bracket # P9012-00, for which I have attached an image with the dimensions labeled. You can compare this to your current welded plate to see if it matches. The Fulton Bolt-Thru features a corrosion-resistant...
    view full answer...
  • Replacement Jack for 2003 Centurion Sport Bowrider Boat Trailer
    The Fulton Bolt-Thru Swivel Marine Jack # FXP15W will fit 3" x 3", 3" x 4", or 3" x 5" trailer frames though it uses Jack Mounting Bracket # P9012-00 which has bolt holes that measure 3" on center. Removing your current mounting bracket and using this one will be your best option as there is not an available replacement for a jack that fits a 2 inch on center bracket. I've added a link to a video review of this jack for you to check out as well.
    view full answer...
  • Will Fulton Bolt-Thru Jack # FXP15W Fit in Place of Shelby Jack
    I went out to the warehouse and took a few measurements of the mounting bracket on the Fulton Bolt-Thru Swivel Marine Jack # FXP15W and found that the widest part of the indented hole is 1-12" while the hole that the bolt goes through measured 3/4". I have attached some pictures that you can use as a reference. If these match with your current Shelby jack then you can use the Fulton jack with your current mounting bracket that is welded to your trailer frame.
    view full answer...
  • Will Fulton Bolt-Thru Swivel Marine Jack Replace Fulton Magnum Jack
    Thanks for the photo and based on that I can tell you the Fulton Bolt-Thru Swivel Marine Jack # FXP15W will absolutely work as a replacement for your current Fulton Magnum trailer jack. While this jack looks like it could measure up to your mount, you may find that you need the Jack Mounting Bracket for Fulton Marine Jack # P9012-00 which has mounting holes that measure 3" on center.
    view full answer...
  • Replacement Jack For Shelby 5856A Boat Trailer With 12 Inch Travel And 1500 lb Capacity
    For your Shelby 5856A boat trailer, I recommend the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - 12" Lift - 1,500 lbs # FXPD15L. This jack has zinc plating for corrosion resistance and durable poly wheels. For the single wheel option, you can use the Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs # FXP15L.
    view full answer...
  • Replacement 800-lb Fulton Swivel Jack for 1995 Shorelandr Boat Trailer
    We can help you select a replacement jack for your 1995 Shorelandr boat trailer. The linked page will let you see all Fulton brand side-of-frame-mount swivel jacks which are offered in lift capacities from 400 to 2000-lbs and in both weld-on and bolt-on types. Lift height is either 10-inches or 12-inches. For example, Fulton # FXPD15L is a 1500-lb 12-inch lift jack with dual wheels that bolts on to a 3 x 5-inch trailer frame. It is always a good idea to use a jack rated higher than...
    view full answer...
  • Are Replacement Parts Available for the Shelby 1200 lb Jack
    I have a solution but we do not have any replacement parts available for the Shelby jacks. Instead a replacement would be what I had to offer. If it is a bolt on jack use the Round Swivel Marine Jack w/ Wheel part # MJ-1200B. If it is held in place by a snap ring use the Fulton Round, Snap-Ring Swivel Marine Jack part # FTJ12000101 it will come with the bracket and a new snap ring but in most cases you will not use the bracket. These are both rated at the same capacity of your Shelby...
    view full answer...
  • Bolt Through Swing Away Trailer Jack For Limited Space Trailer Tongue
    The Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs # FXP15W. This jack is 12-3/4 inches retracted and has a clearance of 12-1/2 inches from mounting bracket to top of jack. This will be the closest jack to fitting your needs. If you don't need the bolt thru style, I recommend the Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 11" Travel - 1,200 lbs # MJ-1200B which is bolt on and has the 12-1/2 inch retracted length. Unfortunately...
    view full answer...
  • Replacement Jack Recommendation for a Fulton Magnum 1,200 lb Jack
    What would work as a replacement for your Fulton 1,200 lb jack that I would recommend is the Fulton Round, Snap-Ring Swivel Marine Jack # FTJ120W0301. In your pictures you did not include one that shows the bracket that attaches to your trailer mount, but you will need to reuse that bracket to install this jack. I attached a review video for this jack for you to check out also.
    view full answer...
  • How to Determine What Trailer Jack Would Attach to Welded on Frame Bracket
    If you can get me a picture of the bracket you have welded to your trailer I can most likely identify what jack would bolt to it. For example if your bracket looks like the one I attached a picture of the Fulton jack part # FXP15W would fit and work well.
    view full answer...
  • Replacement Jack for Ranger Boat Trailer with Weld-On Jack
    The Fulton Bolt-Thru Swivel Marine Jack, Weld-On # FXP15W is designed to mount to its mounting bracket with a single center bolt. The mounting bracket designed to work with this jack is part # P9012-00. In order to replace the weld-on jack on your boat trailer, you will want to cut off the existing mounting plate. I spoke with Ranger boats and they informed me that the manufacturer of their weld-on jacks is no longer in business, and that there are no replacement parts for it. They...
    view full answer...
  • Replacement Marine Sidewind Jack For Trailmaster Bunk Trailer
    The Fulton Bolt-Thru Swivel Marine Jack, part # FXP15W would be a great jack for your trailer. This jack has an 8-inch wheel and the jack has a 1500-lb lift capacity and 10-inch lift height and would be able to handle the load easily. Another jack that you may be interested in is the Fulton Swivel Marine Jack, part # FXPD15L. This also has a 1500-lb capacity but it has two 6-inch wheels and has a lift of 12 inches. These jacks are sealed and lubricated and do not have the zirc...
    view full answer...
  • Recommendation for a Weld-On Trailer Swivel Trailer Jack with Wheel for Boat Trailer
    It looks like the jack on the trailer is a Reese swivel jack. The Fulton jack you referenced # FXP15W, should fit in its place no problem. Fulton and Reese are sister companies. However, the bolt holes are 3 inches on center. You will most likely have to have jack mounting bracket # P9012-00 welded on by a qualified professional welder since none of the current jacks/mounting plates are 3 x 6 on center. You are correct about a C-channel frame. It is not ideal for a bolt on jack. A weld-on...
    view full answer...
  • Recommended Hitch Receiver and Ball Mount for John Deere X590 to Tow Log Splitter
    For your John Deere x590, I recommend the Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter - 2,000 lbs # RP7065100. This will give you a 2 inch receiver that will allow you to use a ball mount like # C45112 in the rise position to get you at the right height for your hitch ball and coupler to meet. This will allow your current jack to work and save your back. I've attached an article to assist with finding the correct ball mount for your trailer. Then you will just need the matching...
    view full answer...
  • Recommended Replacement Jack for 2006 Trailmaster Fulton 1,200lbs Magnum Jack
    Thanks for including your picture of the jack, it helped a lot. The Magnum series jacks have been discontinued and unfortunately there are no direct replacements so that you can use the remaining bracket, but I do have a solution for your 2006 Trailmaster. If you wanted to get the Fulton # FXP15W you would need the # P9012-00 weld-on mounting bracket. Another great option, if you don't want to hassle with removing your current bracket is to get a bolt-on jack like the # FXP15 and...
    view full answer...
  • How Much To Tighten Center Bolt On Fulton Bolt-Thru Swivel Marine Jack
    I took a look at the installation instructions for the Fulton Bolt-Thru Swivel Marine Jack part # FXP15W and there isn't any sort of torque spec for the center bolt but what is stated is that you will need to tighten the lockout until there is little movement. Note: The bolt should be installed between the trailer tongue and mount, the jack bracket will be held by the bushing between the locknut and the mount.
    view full answer...
  • Recommended Replacement Swivel Jack with 10 Inch Lift and Bolt-On Attachment
    Atwood has been bought out and is no longer making the jacks. For your replacement, I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXP15W. This will come with the wheel, the 10 inches for lift and will bolt into place on your trailer to the welded plate. I've attached a video to assist. If you don't have a plate on your trailer, then # FXP15 will also include the bracket to mount.
    view full answer...
  • Will Fulton FXP15W Jack Replace a Fulton XP10W
    Yes, the Fulton Jack, part # FXP15W, will work as a replacement for an XP10W jack. The FXP15W has bit higher of a weight capacity and extends a couple inches more.
    view full answer...
  • Installing Replacement Fulton Marine Jack
    Using Loctite # LT37420 on the bolt from hardware kit # F0933325S00 to install your new Fulton Bolt-Thru Swivel Marine Jack # FXP15W isn't usually necessary but it's not going to hurt anything. If you feel it's necessary you can use the new bolt and re-weld or replace the mounting bracket # P9012-00.
    view full answer...
  • Replacement 1-3/8 inch Gear Kit Recommendation for Fulton 1500 Jack
    It sounds like the jack you have is the Fulton Jack part # FXP15W. This is a Fulton jack with a 1,500 lb capacity with 10 inches of lift. The correct crank for this jack would be the Replacement Sidewind Handle Kit # F0933305S00. The correct Bevel Gear kit for this jack would be the part # F0933306S00.
    view full answer...

Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Installed by:
Jeff D
Installed by:
Cole B
Installed by:
Randy B
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Sarah W
Updated by:
Alexander C
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.