Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(69 reviews)
Price: $247.11
In Stock
Draw-Tite
Add to cart
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Part Number: 24928
In Stock
$247.11
Retail:$407.85
You Save: $160.74
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (69)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 24928
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 200 lbs TW
- Custom Fit Hitch
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Drawbar and pin and clip sold separately
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
24928 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe
60366 Hidden Hitch Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2015 - 2023 Ford Mustang Convertible models
- 2023 - 2023 Ford Mustang Fastback models - excluding Mach-1 and Active Exhaust
- 2015 - 2022 Ford Mustang Fastback models - excluding Shelby, Mach-1, and Active Exhaust
- 2023 - 2023 Ford Mustang Fastback models - Mach-1 and Active Exhaust
- 2015 - 2022 Ford Mustang Fastback models - Shelby, Mach-1, and Active Exhaust
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24928
Average Customer Rating: 4.6 out of 5 stars (69 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.by: Robert 02/16/2023
Ford Mustang
Fairly straightforward install. A lot of bracing bolts to remove and put back if you have a convertible. Hardest part is getting under the Mustang. Barely noticeable, pulls small 4x6 trailer and carries the mountain bikes like a champ.
2016 GT CS Convertible
by: Mark 02/23/2024
Ford Mustang
The hitch works great, have used it on one vacation to carry our bicycles. I do have to be careful on driveways that have a dip, or the hitch will drag on the pavement. Considering how low my Mustang is to the ground, this was to be expected. I am also satisfied with the installer recommended by etrailer.
by: Allan06/01/2023
Adam was great to deal with, confirmed the correct hitch for my Mustang. He had it shipped the same day and received it a week faster than was planned
2022 Mustang GT convertible with active exhaust
Installation was about 90 minutes
by: Lars04/20/2023
Excellent. Super fast shipping. I screwed a 2x6 to the bottom of hitch with deck screws,so I could set it on my jack without having it tip over. It worked awesome!
by: Nathan07/14/2018
2018 Ford Mustang
So I have a fully loaded 2018 Mustang GT with the active exhaust. This exhaust does create an additional obstacle to installation and will require you to remove the control leads for the active exhaust system. It also reduces the amount of clearance you have when maneuvering the hitch into position.
After many prayers to the god of the f-word, we were able to juggle it into place and bolt the thing on pretty much exactly as described in the super helpful installation video that is given with this hitch. I don’t think I could have figured it out without the video so top marks there guys.
Note that you will need an 11/16 socket for the hitch bolts themselves. Considering everything is metric these days I think the manufacturer should just give metric bolts instead of SAE. But it’s not a big deal. It’s a 13mm socket for the exhaust hanger bolts.
Also it’s worth investing in a 90 degree electric ratchet for the very top bolt at the back for the exhaust hanger. Once the hitch is bolted in that hanger is basically impossible to get at and your arms will fall off trying to manually do them up in the tiny cavity that is left above the hitch. I did one bolt then went to Horrible Fright and bought one and my arms are thanking me.
It should be noted that while the hitch is rated to 2000lbs the vehicle itself is only rated to tow 1000lbs as per the manual.
For my application, towing a motorcycle, it’s bueno. The hitch is solidly constructed and well designed and thanks to etrailer for making sure I had the right parts.
by: Brian05/14/2019
This hitch is great for our Mustang! We purchased it to haul bikes, worrying that the bike racks that strap over the trunk can damage the paint over time, and are a pain to take on and off. I was going to do the install myself as the instructions seem easy enough and I have the proper tools, but I do not have ramps or a lift so getting under this low profile car would be next to impossible. An auto repair shop installed it for me in about an hour, and they told me that there is a little bit extra work to install it on a convertible due to having to remove a support member before dropping the exhaust. We're very happy with it - but take note: If you have a sloped driveway, this hitch might scrape the pavement when you are backing out! It happened to my wife the first time she backed out of our driveway. Going slow and at a slight angle solved the problem.
by: Josh 08/13/2024
As described. Quality part, easy install. Thanks for a great site!
by: Fred09/03/2019
Had a friend install the receiver, took about an hour. The receiver and Thule (2) bike rack are very good quality. I installed the hitch in about 30 minutes...3 bolts and you are done.
Janice at etrailer.com was a breeze to deal with. Everyone needs 10 people like Janice to make their business run smoothly. Thanks Fred
by: William01/10/2021
Hitch arrive a day earlier than expected. How the hitch was received is only reason I did not give it a five star. The package box had no cushion and the hitch was literally sticking out of the box. A few dents and missing paint but the product was made good enough to not bend. The job was easy. Took about 3 hrs since I have a convertible. Not bad for a solo job with no power tools. The over all look looks really good mounted. FYI the phone scan option in the directions for step by step pictures don’t work.
by: Marvin B.08/18/2017
2016 Ford Mustang
Received my order in about a week, and everything was in excellent condition. Took it to my Ford dealer who quoted me about 6hrs@$120/h. Asked a friend for help instead and we got the receiver as well as the wiring done (neatly) in under 3 hours. I know she needs a wash (it's monsoon season!), but I've included a photo to show the clearance. When viewing from a standing position you wouldn't even know it was there.
by: Jorge08/27/2021
Item has not been installed yet, but it was received with some imperfections.
Looks like it’s been hit/damaged in multiple spots.
Sierra K.
9/7/2021
Sorry to hear about the damage. Customer Service will be reaching out to you.
by: Chris07/19/2023
The tow hitch itself is great, but etrailer customer service, as well as shipping and handling, is sub-standard overall. The original tow hitch I ordered was delivered in a damaged cardboard box with numerous holes caused by the tow hitch sliding around during shipment. My local auto shop tried to install the hitch, but was unable to do so, as it was bent; presumably during shipment. I called etrailer to request a new hitch, and to their credit, they promptly shipped a replacement. The new hitch also arrived in a damaged box with holes; but fortunately, was otherwise undamaged, and was installed with no further issues. As for the return of the damaged hitch, etrailer notified me via e-mail late on the evening (9:00pm) of June 22nd, that UPS had the return label, and would attempt to pick up the package for 3 consecutive days starting on June 22nd. I left the package in my driveway starting on the morning of June 23rd. No pick-up attempt has been made, and my local UPS delivery driver even left a note on the package stating "Needs label". I have e-mailed etrailer several times in the subsequent weeks, and each time, they have assured me it was being worked. It is now July 19th, and the return package has been sitting in my driveway for nearly a month. Bottom line, good quality product if it arrives undamaged (a big "if" with poor packaging), and below average customer service. Recommend you purchase directly from the OEM, if possible.
by: Victor05/21/2018
2017 Ford Mustang
Just installed the hitch, it's a two man job if you don't have the right tools. I like the way the item looks and cannot wait until I tow a trailer to see how the hitch handles.
by: Tammy 06/23/2024
2023 Ford Mustang
FYI THIS hitch fits the 2024 Mustang GT
by: Jimmy 09/19/2023
Ford Mustang
The fit is great and does what I bought it to do. I use it to hook my bike rack to the back of my Mustang for weekend rides and it's super convenient. Similar reviews have captured my same sentiments better than I could in regards to install difficulty and shipping packaging quality. If a bolt falls into the frame while trying to thread it through, it adds quite a bit of time trying to get it back out, so budget accordingly like any maintenance project.
by: Jesse08/31/2019
The hitch fit perfectly on my 18 convertible. Install was easy due to great directions on the website. The only issue was getting it into place as I installed it by myself. Propped it up on the jack as the hitch was strapped to a 2x4
.
by: Steve03/19/2018
Installation went well. On the convertible there is a brace that stiffens the chassis that has to be removed to do the installation. It's reinstalled after the hitch is in place.
by: Chris07/21/2022
This hitch was difficult to install. Threading the bolts through the frame of the Mustang is dicey at best. It is very difficult to work with, holding up the parts while handling the threading wire. If the bolt falls off the wire you are in trouble because there is no way to retrieve it. I Was careful, read the instructions and watched the video several times before trying it and still lost one of the 6 bolts when the wire stretched and the bolt slipped out. No way to retrieve it nor could I send in another as that bolt blocked the path for the new one. I use the hitch sparingly only when needed because of this.
Katrina B.
8/2/2022
Oh no, Im sorry to hear that the installation was difficult. We recommend that you get the missing bolt at your local hardware store. When purchasing the replacement hardware, make sure that you are using grade 8 hardware. I have sent your information over to our customer service department for them to get in touch with you on this matter.
by: Marco n05/02/2021
Bit of job to put it in. It took a few hours to do, the frame has to be removed somewhat and reinstalled. Some of the mounting bolts don’t want to go back in straight. Had to use a tap to clean up the holes 2 different times. The paint scratches easily and rusts inside. Would’ve been nice if powder coated. Speed Bumps are a menace now! When a speed bump now hits it (often) or sounds like thunder and terrible. Not a fun job, Woof. But fit is good.
Brooke M.
5/5/2021
Thank you for your review! While this hitch is powder coated, a good way to prevent rust from forming where the hitch has scratches is by applying rust resistant paint. I linked an article that has more information that may be helpful to you.
Helpful Links
by: 05/24/2021
Seems to be a good product.
Could let people know that you have to enlarge the holes in the frame to get back piece in.
But it should work just fine.
by: William A06/15/2020
2016 Ford Mustang
I'm able to use this to tow a Kendon motorcycle trailer, a paramotor, etc. behind my 2016 Mustang GT convertible. With the properly chosen attachments and trailer setup, this tows really great. The hitch also doesn't impede on my ground clearance as it still isn't the lowest spot under the car. This was a relief to see.
by: Keith H12/05/2020
2019 ford Mustang
Hitch is great, good instructions and easy to install. The only reason for four stars instead of five is that on a 2019 Mustang GT Conv it seems to be about a half inch to an inch too wide. When you reinstall the exhaust the two mufflers, one on each side touch the sides of the hitch causing a slight engine vibration throughout the vehicle. Since the exhaust is welded through the y pipe it is not adjustable.
by: Debra05/20/2022
Ford Mustang
I am 100% satisfied with my receiver hitch! It’s sturdy and easy to use. I was excited to find a product that would accommodate my Mustang and my bike rack.
The only concern is its proximity to the ground. Since my car is already a lower vehicle, you have to take care on steep driveways and such so that it won’t drag the ground. It’s not an issue with regular driving conditions.
by: Hector01/05/2019
2018 Ford Mustang
4th Hitch I have purchased from etrailer and each one has been installed with out issue. Would I recommend etrailer the answer is yes. Fast delivery, friendly service. Instructions and videos very informative. I will admit I did not install this hitch myself since the Mustang requires the T-cup harness to be run underneath the car to the battey, a lift will make life so much easier. Time to perform both hitch and harness installation two hours. Sorry no picture but Kudos to etrailer.
25
69
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- 2015 Ford Mustang Convertible Hitch and Bike Rack RecommendationFor a trailer hitch for your 2015 Mustang GT Convertible you would want the Draw Tite Hitch part # 24928 which has been confirmed to fit your vehicle. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info.
view full answer... - Recommended Trailer Hitch Receiver For A 2017 Mustang GT Convertible Hey Allan, For a 2017 Ford Mustang GT convertible there's currently only the Draw-Tite Sportframe Trailer Hitch Receiver # 24928. This is a 1-1/4" shank with only a 200lb tongue weight capacity so you'll need to be careful to not overload it. If you need a cargo carrier then I recommend the 17x46 Curt Cargo Carrier # C18145.
view full answer... - Least Visible Trailer Hitch Recommendation for 2020 Ford Mustang FastbackThe least visible trailer hitch for a 2020 Ford Mustang Fastback is the Curt Trailer Hitch Receiver part # C11405. I have attached a photo for you which allows you to see how concealed the trailer hitch is once installed. In comparison to the Draw-Tite Sportframe Trailer Hitch Receiver part # 24928, the Curt Trailer Hitch Receiver has a round tube which tapered in towards the vehicle which is what makes it more concealed. The Curt Trailer Hitch Receiver is a custom fit so no drilling...
view full answer...
- Is There a Class II Trailer Hitch for a 2017 Ford Mustang GTThe only trailer hitch options available for a 2017 Ford Mustang GT are class I, the Draw-Tite Sportframe Trailer Hitch Receiver part # 24928 is what I recommend. It has a 1-1/4" opening which works great for towing or hitch mounted accessories like bike racks and cargo carriers. If you have a bike rack with 2" shank you'll need an adapter like the Trailer Hitch Adapter part # e93YR just keep in mind these reduce weight capacity by 50%.
view full answer... - Recommended Hitch And Wiring For A 2021 Ford Mustang GT Convertible With Quad Exhaust TipsFrom what I could find out, the Draw-Tite Sportframe # 24928 will be a good fit for your 2021 Mustang GT convertible even with the quad exhaust tips. This will use the same size muffler so there will be no issues there. We do have a couple options for wiring and the first will be the Vehicle Wiring Harness # C59496. This is a hardwire kit that you will need to splice directly to the vehicle's wiring as well as run a line up to the battery for needed power. If you do not want to splice...
view full answer... - Least Visible Trailer Hitch Recommendation for 2015 Ford Mustang FastbackThe Draw Tite hitch part # 24928 would be less visible than the Curt # C11405 because it sits 1/2 an inch higher and it doesn't have a collar around the opening of the hitch. Instead it's just an open shank which would be slightly less visible. For trailer wiring you'd then want the part # 118487 which is a confirmed fit. For a ball mount you'd then want the part # 3594, 2 inch hitch ball # 19258 or 1-7/8 inch ball # 19256.
view full answer...
- Trailer Hitch with Best Ground Clearance for 2018 Ford Mustang The Curt # C11405 and the Draw-Tite # 24928 Class I Trailer Hitch for your 2018 Ford Mustang feature very similar designs but the Curt # C11405 will provide a slightly better ground clearance measurement (by about 1/2 inch). Since ground clearance is a potential concern with your Mustang this will be your best option. This Class I hitch features a 200 pound tongue weight limit and a 2,000 pound towing capacity. It will provide you with a 1-1/4 inch receiver and install by using existing...
view full answer...
- Dimensions of Draw Tite Hitch 24928 For a 2016 Ford MustangI spoke with my contacts at Curt and Draw Tite to track down the dimensions you requested. I was able to get a dimensional drawing from Draw Tite that has what you asked about plus more as well. For the Curt they state that the first dimension you are looking for is 7.6 inches, the second 5.1 inches and the third 7.2 inches. Looking at the picture of the Draw Tite it looks to be 8.4 inches, 6.96 inches, and 7.273 inches. Hopefully the diagram helps explain the dimensions better as it...
view full answer...
- How Much Does the Trailer Hitch for a 2018 Ford Mustang WeighThe Draw-Tite Sportframe Trailer Hitch Receiver part # 24928 which is a fit for your 2018 Ford Mustang weighs around 38 lbs. The other option you have is the Curt Trailer Hitch Receiver part # C11405 which weighs around 36 lbs. However, the Curt Trailer Hitch Receiver requires exhaust modifications whereas the Draw-Tite Sportframe Trailer Hitch Receiver does not so is most likely the better option. I have attached an install video of the Draw-Tite Sportframe Trailer Hitch Receiver for...
view full answer... - Does Draw Tite Hitch for 2017 Ford Mustang Require Rear Fascia TrimmingI checked the install instructions for the Draw Tite hitch part # 24928 that you referenced that fits your 2017 Ford Mustang and it does not require trimming of the lower rear fascia. I attached a picture of the hitch installed below it too. Hitch installs are pretty basic for mechanics. I would just find a local mechanic to you with a good reputation and let them do it.
view full answer...
- Best Hitch Recommendation for 2016 Mustang for Carrying Bike Rack, Why Does Curt Require StrapCurt hitches that are lower in capacity have the stabilizer strap recommendation because they just happen to be more cautious than Draw Tite and Hidden Hitch. By no means are they made lower quality. The USA-made Curt hitches are great and work well. But it is pretty annoying to have to use the stabilizer strap part # 18050 when using a bike rack like the Swagman XTC2 Bike Rack part # S64670 that you are interested. On a brand new Mustang I wouldn't want the metal hook touching the painted...
view full answer... - Recommended Hitch and Wiring for a 2017 Mustang ConvertibleThe Draw-Tite # 24928 is designed for your 2017 Ford Mustang Convertible. This is a 1 1/4 inch Class I hitch, so it is limited to a maximum of 2,000 pounds towing and 200 pounds of tongue weight. Unfortunately, there is not a larger 2 inch option available for the Mustang line. You can add a hitch expander, like the Brophy # HTAD, to get up to the 2 inch opening, but these do cut your tongue weight in half, so are not highly recommended. That being said, there are some great bike racks...
view full answer... - Fit and Compatibly of Kuat Sherpa 2-Bike Rack on a 2016 Ford Mustang with Draw-Tite Hitch # 24928Good news! The Draw-Tite trailer hitch # 24928, which is a confirmed fit for your 2016 Mustang, is going to give you a Class I 1-1/4 receiver opening that will be compatible with the Kuat 1-1/4 platform racks. We know that this hitch needs 5-1/2 inches for bumper clearance when choosing a bike rack. The Kuat Sherpa 2.0 2-bike platform rack for 1-1/4 hitches # SH12G (Gray) # SH12P (Pearl) # SH12B (Black) will be compatible with your 2016 Ford Mustang. These racks when folded up will...
view full answer... - Hitch for a 2019 Ford Mustang Bullitt with Both Active Exhaust and Magneride SuspensionI can't confirm the fit of the # C11405 hitch on your GT model with Active Exhaust and Magneride. I also can't put to you in contact with a customer just because they posted a review. A Customer named Pete also installed this on a 2018 GT and stated he had to move the active valve performance exhaust and clips to the back of the sensor to attach it back to the frame. He said it was a minor adjustment but again don't know if there was magneride but likely so on that model. He said the...
view full answer... - Class I Trailer Hitch Availability for 2015 Ford Mustang V6For the 2015 Ford Mustang only light-duty 1-1/4-inch Class I hitches are made. This is because the car's frame structure cannot support the higher weight capacity of a Class II hitch. There would be no value is using a higher-rated hitch (nor in having one made) since the car itself cannot support even the Class I rating of 200-lbs tongue weight and 2000-lbs gross trailer weight. According to the online Ford towing guide the V6 Mustang has a 1000-lb maximum trailer weight capacity. Your...
view full answer... - Install Instructions for Draw-Tite Hitch On a 2019 Ford Mustang ConvertibleYes, I have attached the installation instructions for installing the Draw-Tite Sportframe Trailer Hitch Receiver part # 24928 on a 2019 Ford Mustang Convertible. However, these instructions are the same for all models but there are separate notes for installation on convertible models. I have attached for you these notes as well as a photo of the hitch installed and in-use. If you will be using the trailer hitch for a bike rack, the Kuat NV 2.0 Base 2-Bike Platform Rack part # BA12B...
view full answer...
- Recommended Trailer Hitch For 2017 Ford Mustang GT350 With Quad ExhaustThe trailer hitch I recommend for your 2017 Mustang GT350 is the Draw-Tite Sportframe, part # 24928. This is a Class l hitch and it has a 1-1/4 inch receiver opening. I recommend this hitch because it does not require a stabilizer strap like part # 18050, like the Curt Hitch # C11405. I called my contact at Draw-Tite and they said the 24928 hitch will work with the quad exhaust on your Mustang. The exhaust has to be lowered when installing the hitch but it is re-installed.
view full answer... - Least Visible Trailer Hitch Recommendation for 2018 Ford MustangThe trailer hitch I recommend for your 2018 Ford Mustang is the Draw Tite hitch part # 24928 because it is slightly less visible than the Curt # C11405 which also fits and because unlike the Curt it does not require a stabilizer strap when carrying a non-supported load like a bike rack. The biggest visibility difference is that the Draw Tite does not have a collar attached around the hitch opening which allows it to be slightly less visible.
view full answer...
- Recommended Trailer Hitch For 2015 Ford Mustang GT Premium ConvertibleWe have just what you are looking for. The trailer hitch I recommend for your Mustang is the Draw-Tite Sportframe Trailer Hitch, part # 24928. This is a Class l hitch and it has a 1-1/4 inch receiver opening. I called my contact at Draw-Tite and asked about the GT Premium Convertible model to see if there were any issues with a trailer hitch. They told me that the # 24928 is listed as a fit for all models. I have attached a link to an installation video for this hitch on a 2015 Mustang....
view full answer... - Most Hidden Trailer Hitch For 2015 Ford MustangThe cross bar can be seen on all of the trailer hitches we have for the 2015 Ford Mustang. The hitch receivers on the Draw-Tite # 24928 and Curt # C11405 trailer hitches all set 5-1/2 inches behind the rear bumper. I have attached a photo showing this measurement. You may find that the Curt hitch is more appealing to you because of the curved, round tube design. I have also attached installation videos of these hitches for you.
view full answer... - Trailer Hitch Hardware to Fit a 2015 Ford MustangDo you have the Draw-Tite hitch, part # 24928? You need the part number of the hitch for your 2015 Ford Mustang. Then use part # RHK and select the hitch manufacturer and enter the hitch's part number. This will order the exact hardware kit originally included with the hitch.
view full answer... - What is the Space Between Hitch Pin Hole and Welded Stop Tab on Draw-Tite Trailer HitchThe Draw-Tite Sportframe Trailer Hitch Receiver # 24928 that you referenced will not require the use of a stabilization strap with a bike rack to comply with the hitch's warranty. The welded tab inside the # 24928 trailer hitch measures 1.712 inches from the center of the hitch pin hole. I have attached a photo showing this measurement for you. Class I trailer hitches like # 24928 are limited to carrying 2 bikes on a hitch mount bike rack. One of my favorite 2 bike racks is the Hollywood...
view full answer...
- Weight of Curt Trailer Hitch Receiver and Other Parts to Tow with a 2017 Ford MustangThe Curt trailer hitch receiver, part # C11405, has a shipping weight of 45 pounds. That includes the hitch, hardware, and shipping materials. The shipping materials don't amount to much so the hitch and hardware weigh just a bit under the 45 pounds. The Draw-Tite hitch that also fits your 2017 Ford Mustang, part # 24928, is 43 pounds for shipping so it's just a little less than the Curt. You need to add trailer wiring too. I recommend part # 118487 which is a fit for your Mustang. Class...
view full answer... - Trailer Hitch Receiver and Wiring For a 2016 Ford Mustang Convertible You will not have any issues with removing the support crossmember on your 2016 Ford Mustang Convertible to install the Draw-Tite Sportframe Trailer Hitch Receiver # 24928. The crossmember is detailed in the instructions I linked below and has 14-10mm bolt holding it in place. At this time we only have a video of installation on a coupe. Draw-Tite recommends using their Drawbar # 3594 in the rise position only with their receiver. A 2" Hitch Ball # 19258 or 1-7/8" Hitch Ball # 19256 will...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Robert C
Test Fit:
David F
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Joshua S
Video by:
Dustin K
Written by:
Lindsey S
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert
2/17/2024
After one year, hitch is still working as promised.