Is There a Class II Trailer Hitch for a 2017 Ford Mustang GT

Question

Question:

Do they make a class 2 hitch for a 2017 Ford mustang gt

asked by: Kevin M

0

Expert Reply:

The only trailer hitch options available for a 2017 Ford Mustang GT are class I, the Draw-Tite Sportframe Trailer Hitch Receiver part # 24928 is what I recommend. It has a 1-1/4" opening which works great for towing or hitch mounted accessories like bike racks and cargo carriers. If you have a bike rack with 2" shank you'll need an adapter like the Trailer Hitch Adapter part # e93YR just keep in mind these reduce weight capacity by 50%.

expert reply by: Conner L

0

Answer 1

We do not have a custom fit hitch specific to your 2023 Kia Forte GT but we did receive a review from someone who mentioned they were able to install it on their 2020 Forte GT but it took cutting a hole in the bumper and modifying part of the frame.…

view full answer...

Answer 2

I do have an option for you but there are only class 1, 1-1/4" trailer hitch options for a 2022 Toyota Corolla since it's a small vehicle, I recommend the Curt Trailer Hitch Receiver part #C34UR. In order to use a bike rack with a 2"…

view full answer...

Answer 3

The Trailer Hitch Adapter part #e93YR can be used to raise a bike rack off the ground more to provide greater ground clearance. It will as you said reduce the hitch's capacity by 50% so as long as the weight of the bike rack and bike is under…

view full answer...

Answer 4

Hey Doug! The closest thing we have to what you're asking for is the 1-1/4" to 2" Trailer Hitch Adapter item #e93YR. This has a 5" rise and most likely won't work for your Camry for the same reason what you're asking for…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

For a trailer hitch, the Draw-Tite #DT83MR is confirmed to fit on the 2020 Kia Forte as long as it is not the GT model and will provide you with a 1-1/4" receiver. For wiring, I recommend using the #C59496 because it has a powered converter box…

view full answer...

Answer 7

There sure is! You'd want to use the Draw-Tite #DT83MR, as the #24903 you'd looked at fits the previous generation vehicle and wouldn't fit your 2021 Forte. This being said, instead of the Draw-Tite #DT83MR which would be fully visible…

view full answer...

Answer 8

The only trailer hitch options available for a 2022 Kia Forte are class 1, 1-1/4" like the Curt Trailer Hitch Receiver part #C55HR which is what I recommend. Unfortunately, this hitch won't be cut out for hauling a mobility scooter as they…

view full answer...

Answer 9

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part #C54ER, has a plug behind the sidewall of the driver-side. It is not in the trunk because it is behind the sidewall. Unfortunately, we do not have a video of this…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Is There a Class II Trailer Hitch for a 2017 Ford Mustang GT

Products Featured in This Question

Continue Researching