Don't Miss These Holiday Savings!
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (355 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.2023 Rogue SV, perfect fit. Took about 20 minutes to install. Lubricated bolt holes but really didn't need to, my threads were clean. Used a jack stand to hold up opposite side while installing bolts. Others complained about shipping box splitting, they must have listened because mine was just shrink wrapped in plastic. It really was as simple as put up in place, tighten 4 bolts done.
Arrived 2 days early. This came shipped in several layers of plastic wrap along with the light kit, cap and small bracket. It was delivered with no damage or scratches. It was fairly easy to install with the help of my son and a floor jack. we'll do the light kit installation another day. Everything lined up perfectly. We did remove the to plastic pins to make it easier to flex the plastic bumper. trim out of the way. I would recommend it.
i would give it 4-5 if it wasnt for damaged box and bent outer brackets. I had to bend both sides over 3/4 inch to make it fit correctly. I used my patio steps for leverage to flex them out. But after bending out approx 43 3/4 i believe it fit just right. overall it fit good after that.
My daughter was needing a trailer hitch receiver to mount their bike rack on. I found this custom fit receiver on eTrailer, and based on past experience with the company, figured that it was worth a shot. It fit like a glove, and mounted up in about 20 minutes. Even though the included instructions called for removing a couple of pins securing a trim piece, to make wiggling it into position easier, I didn't. It went into position just fine. Other customers took issue with the fact that the hitch had "punched" a couple of holes in the shipping box. But in all reality, there is really no other way to ship it without putting it in a HUGE box...truly unnecessary. Well made hitch!
The hitch was a good value and not very difficult to install at all. Without too much trouble and the help of my wife and some blocks and a floor jack, I was able to get it installed in about and hour and a half without lifting the rear of my 2021 Nissan Rouge at all. Our use for the hitch is for connecting our bicycle carrier which should work just fine.
I think it was much easier than it looked in the video. It took me about 35 minutes to install it. I didn't have to take off most of the stuff that showed in the video. I think with the Nissan Rogue 2023, it is unnecessary to take all the pieces out.
Received the hitch ahead of time. After reviewing the s instructions and the video the installation was just as described. I installed the hitch by myself in about 45 minutes. Fit is perfect and looks like it could have come from the factory on the car. Glad we chose the hitch from ETRAILER.
Perfect FIT! was able to install by myself and a hydraulic floor jack all in about an hour.
Excellent PRODUCT! EASY INSTALLATION! I E NEVER HAD A BAD EXPERIENCE WITH THIS COMPANY. Every time I purchase something,I am completely satisfied with product,price, shipping,and customer service
Great company.
This was fairly easy to install. I used cardboard from the shipping box to lay on underneath tbe Rogue and minimize scratching the receiver on the driveway. I lined up the driver side and threaded in one bolt+washer, then spun myself around to face the passenger side and threaded the fasteners on that side. I supported the receiver tube on my legs to raise it as needed. This might not work for everyone. When I returned back to the driver side to put the remaining fastener in and start tightening with the socket, I found that there wasn't enough clearance to get the socket on the forward-most bolt, so I used a wrench there. I used a ratchet instead of a torque wrench and estimated the tightening force.
Arrived quickly and was very easy to install. I had this installed on my 2023 Nissan rogue in less than 10 minutes by myself. I opted to not remove the plastic trim piece. Just had to flex it a bit and it went right on. I won’t be towing with this, but it’ll be great for our cargo carrier!
I installed this with my son on my 2022 Nissan Rogue SL. NISSAN already had the hole pre bored and all you need is an torque wrench with a size 19mm socket and etrailer supplied the rest.
Thank You etrailer for this hitch, my wife and I are ready to get back to our bike riding.
My wife and I bought a trailer hitch for our 2021 Nissan Rogue so that we could haul a bike rack with two e-bikes. We are both in our early 70’s but after watching the installation video for our vehicle one trailer, we decided to do it ourselves because the etrailer video said it could be used nstalled with the vehicle on the ground. From start to finish was maybe 2 hours but we’re old and don’t move as fast as we use to especially on the ground under a Rogue. Last winter we put 3800 miles on the hitch loaded with e-bikes with no problems. We would not hesitate to buy from etrailer if we needed something merging else that they sell.
Very easy installation that I could do by myself and I am very satisfied with the overall look
Shipment arrived as scheduled, but the box was damaged and the trailer hitch was sticking out of the box. I’m sure you could do a better job with packaging.
I had just purchased a new Nissan Rogue and wanted to put a hitch on to accommodate a bike carrier. etrailer had the best price, and their website, videos and customer comments were very helpful. Hitch arrived in a few days, and installed easily with no complications or skinned knuckles. I knocked off one star for packaging, as the shipping box was not up to the task. The hitch had broken thru the cardboard, got a little scratched up, and required some touch up paint. Other than that, a 5 star transaction.
Perfect fit to my 2021 Rogue SV. Easy fit with the help of my son, only took us 20 mins. Fast delivery too by e-trailer. High quality product excellent finish… Highly recommended!
I would’ve given this five stars because the trailer hitch is solid and well built. Installation however it was a different story… It was not an easy installation. We had to put it up on a neighbors rack and then try making it a quarter of an inch wider. We had to use a house Jack and a wood block to spread it wider. Sooooo… the part of the instructions that state “ for easier installation remove the three plastic locking caps from the underside of the car bumper.” Errrrrrr….that made no difference whatsoever! Lol
Jenny N.
6/27/2022
It sounds like that the side brackets were knocked out of alignment which is why the bolt holes are not lining up. This can happen while in transit to our facility or to you. We do have a great FAQ that provides ways to move the brackets back into alignment so the hitch can be installed.
Helpful Links
Boxing is not the best,it was delivered out of the box.
I was unable to set the hitch up at first time because transportation cause some damage and I had to expand it to be fitted in the car frame.
This was surprisingly easy to install. Took me less than 30 minutes and would have been even faster if I had a second person to assist. The hitch receiver has worked well. Not much for ground clearance on my 2021 Rogue, but still able to use a hitch-and-haul and tow a small boat which is exactly what I needed. Great product!
Overall etrailer service and performance has been outstanding for each of the several purchases I’ve placed with you.
Definitely my go to retailer for outdoor activities.
One problem…
The packaging of the Yakima trailer hitch was inadequate for its size/weight. Fix that and you’d rate a “perfect” outstanding
The product is as advertised. Installation was easy as it took 2 of us about 20 minutes to install it. Access to the bolts is tougher on the drivers due to the muffler, but it fit perfectly. I recommend watching the installation video. They do need to do a better job with shipping. The 2 brackets that bolt to the car were ripped through the box. The metal easily sliced through the cardboard and were exposed. (See photos). Other reviews noted this and some were even bent on arrival. Mine were not and fit fine, but the packaging definitely needs to be reinforced.
Fantastic customer service -
I had an issue via a couple missing bolts and a washer. I called the customer service line and they were all over it. A replacement parts packet was immediately shipped and received in 2 days.
Great product. Very well made and fits perfectly. It will serve its purpose very well.
Easy installation. With one person helping it was a piece of cake. Info and installation videos are available.
Really solid construction. Brackets fit our Nissan Rogue perfectly. However, clearance between hitch and muffler heat shield is extremely small, so when the engine is idling there is contact and some noise. I had a helper pull on the hitch with the bolts loose to try to position the hitch as far away from the heat shield as possible. It may not be enough (in which case I will bend the heat shield a bit). Overall I really like the hitch and the muffler heat shield issue is a solvable minor annoyance. Would recommend.
Shipping was free, but as others had warned, the hitch showed up UPS hanging out of the box in 3 spots. This could be resolved easily by wrapping the hitch with padding so it doesn't cut through the box. Luckily there wasn't any damage to the hitch. Hitch installation was simple and easy with the help of a friends lift. Took 15 minutes and fits great!!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard
10/31/2023
Its been working perfect for our heavy E-bikes