Viair Plug-N-Play Portable Air Compressor - 200 psi - 1.5 cfm - 12V - 7-Way Plug

Video Transcript for Comprehensive Review: Viair Plug-N-Play Portable Air Compressor

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Viair 12 volt Plug-N-Play, 200 PSI portable air compressor with the seven way plug. Now this is a 12 volt compact air compressor with a one and a half gallon tank. Gives you a nice combination of size and capability, and the weight of this unit is only about a little over 23 pounds. Now this will let you air up your vehicle tires, your bike tires or other inflatables as needed, using the portable air compressor right here with this one and a half gallon tank. The compressor itself will charge the tank up to 200 PSI and you can use the dial regulator right up here to limit the output for more specific inflation needs.

The tank manifold carries dual analog gauges and just tilt this so you can see 'em and that makes it simple to monitor and manage the tank pressure. The left side gauge right here has a safety valve on it and the tank pressure gauge over here. The right side gauge will sit above that output pressure adjuster and it shows your active regulated hose pressure. If you notice right here is the quarter inch quick connect coupler. That'll use standard air hoses for connection.

Now the air hose is not included. We do sell that separately. Now for lower volume and pressure limited inflatables, as we mentioned, you can adjust the output right here from zero to 200 PSI. Now Viair does recommend using the full 200 PSI for vehicle, tire, or high volume inflatables. We mentioned the seven way towing plug right here that you can plug into your seven way.

This is used to connect to your vehicle battery, attaches to your compressor via a two pin connector. Right up here you can see this will actually unplug if you wanna remove the seven way, have a standard two pin connector and a 30 amp fuse inline fuse here. Now the compressor does feature an on and off switch right here and on the other end a replaceable air filter. And I did want to demonstrate how loud this is and how it operates. I happen to have a battery box right here, you can see.

And this battery box will have a seven way plug that I'll be able to plug this into. So basically if we go ahead and plug this in, got it plugged in, and then right over here we'll have our switch. So if we'll hit the switch, you'll be able to hear how loud, it's actually not loud at all. Very quiet for a compressor. Then you can hit the switch to turn it off, switch to turn it on. Turn off has a nice cover over the switch to protect it from the elements. Go ahead and disconnect it. Now this is mounted on a nice sturdy steel frame. It's equipped with a nice foam grip handle right up here and it uses rubber feet so there's not really much vibration of it moving around. Again, the voltage on this 12 volts, maximum amp draws 23 amps. We mentioned the tank capacity of one and a half gallons. Maximum air pressure 200 PSI, maximum airflow of 2.62 cubic feet per minute. On the compressor itself, it does use a permanent magnetic compressor motor. A duty cycle on it is a hundred percent at a hundred PSI and 55% at 200 PSI. Last thing is the size of this unit. It's gonna be 14 inches wide, 14 inches long and about 12 inches tall up to the highest point. But that's gonna do it for the review on this Viair 12 volt Plug-N-Play 200 PSI portable air compressor with the seven way plug.