Review of Air Lift Tire Inflator - Portable Tire Inflator - AL79FF Video

Yes, we do Tyler. For an air compressor that can be powered off of a 7-way connector, I recommend the Air Lift 7-Way Automatic Portable Air Compressor item #AL79FF. This air compressor can go as high as 120 psi to fill your air stream's tires.…

Good morning Bobbie! Sorry for the troubles you were having; I've been there before and know exactly how you feel. I have a great option for you, but the jack you were looking at - Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

Hey Tom! Once you've got the Air Lift 1000 Air Helper Springs for Coil Springs #AL63WQ installed, I recommend filling them to 10 psi and seeing how that feels with everything loaded up. None of the air bag manufacturers have a charting for each…

Hi Cindy! Better can be a relative term when it comes to things like this. Internal sensors like those found in the Tuson Towable Tire Pressure Monitoring System - 4 Sensors - Brass Interchangeable Valve Stems #335TPMS4WIVS and TST TPMS - Color…

For a replacement foot, I recommend the Replacement Rear Foot Pad for Lippert Components Ground Control 3.0 Leveling System #LC377962. For the front foot, I recommend the Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling…

Hey Patrick! For this setup Air Lift will be the way to go. If you have a 2WD you need the #AL57391 and for the 4WD #AL79DQ. Then for an air compressor you can use the Air Lift Load Controller II Compressor System #AL25592. This is a single path…

I understand your concern. I called Lippert to verify that the 132 Ft-lb of torque and use of Locktite is still valid. They said that was the requirement and there were no alternative instructions. The assumption is that this is the method they used…

Hey Tim, the Black Armour Heavy-Duty Custom Truck Bed Mat #BA99AR is so thick that the ridges of your bed aren't going to be pronounced at all and your equipment will easily be able move without damaging the wheels. This is 1/2 inch thick. Now…

The Air Lift 1000 Air Helper Springs for Coil Springs part #AL60769 which are a fit for a 2013 Chevrolet Suburban do not require the coil springs to be removed for installation. I will admit though, there are times were I thought it would be faster…

Hey Milos, I would go with the ball sensor setup part #TUS37FR over the part #335TPMS4WIVS since it is totally separate from the tires valve stems. So if you were to happen to have a valve stem issue and you had the ball sensor kit you could use…

The batteries in the sensors of the Tuson Towable Tire Pressure Monitoring System #335TPMS4WIVS that you mentioned will last around 5 years with normal use and are not replaceable. You'd have to replace the sensor with the part #335TPMS-SENS…

The Roadmaster Comfort Ride Leaf Spring Suspension Kit part #RM-2460-2570 and the Lippert Components Center Point by Trailair Air-Ride Suspension Upgrade part #LC1565391 are both excellent options. That said, it is really hard to beat the…