Customers compare WM8001-135 to these similar products
Products Featured in this Video
Hi there, Jayco owners. Today, on our 2020 Jayco Redhawk, we're gonna be taking a look at and showing you how to install the tire inflation kit. And this is for dual wheels and this set is gonna work for both the driver and passenger side. This hose extension kit's gonna be great to take the difficult to access rear wheel inflation valves on your rear tires and bringing them out here to the edge… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
From the connection point to the end of the bend in the Wheel Masters 4-Hose Inflation Kit #WM8001-135 is approximately 1-1/2" in length. You could try sticking a tape measure in there and measuring out 1-1/2" at a 135 degree angle…
view full answer...For the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend #WM8001-135, the inner hose is 13 inches straight and the outside hose is 9-1/2 inches. I've attached a photo to help.
view full answer...If you have wheel liners then you want to use the 135 degree bend kit part #WM8001-135 but if you have wheel covers then you need the 90 degree bend kit part #WM8208 instead. Attached are demonstration videos of each for you to reference.
view full answer...We have valve extenders for your dual wheel tires. I recommend the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount #WM8208. The length of the hoses with straight valve extenders is 13 inches.…
view full answer...Yes we do. For a 2024 GMC Sierra 3500 HD Long Bed you will need the Gen-Y Gooseneck Trailer Hitch #GY73XR.
view full answer...You were on the right track- the Wheel Masters 2 Hose Inflation Kit #WM8009 are designed for 16" to 19-1/2" wheels like the ones on your Winnebago Access and will work with TPMS systems. The 7-1/2" hose length is going to supply you…
view full answer...For your 2018 Sunseeker 2800 on E-450 Cutaway, I recommend the Wheel Masters Airless 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount #WM8208. These will fit your 16 inch wheels and the wheel liners/covers. If you look at…
view full answer...The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA22 is listed to fit and install above the leaf springs on your 2019 Coachmen Leprechaun 319MB. I tried looking up a photo of the suspension on your motorhome but I could find…
view full answer...Items like the Wheel Masters 4-Hose Inflation Kit #WM8001-135 are not something that we can determine just from your motorhome information. The correct kit is going to be determined by the wheels/tires you have on your motorhome. For instance the…
view full answer...The only option we have for a spare tire carrier for your Class C motorhome that will fit a 16 inch dually spare is a hitch-mounted carrier: Roadmaster Hitch Mounted Spare Tire Carrier #RM-195225 This fits 16 - 24-1/2 inch wheels that have any bolt…
view full answer...For wheels with smaller hand holes like your setup has we know the Wheel Masters 4 Hose Inflation Kit #WM8001-135 would work well. Check out the attached picture and you can see them installed on a similar style wheel.
view full answer...Hey Chris, From what I can find your 2018 Winnebago Vista 29VE has 19.5" wheels so the Wheel Masters 4-Hose Inflation Kit #WM8001-135 would work. Based on the photo the 135 degree bend is likely going to be the best fit but you might have to…
view full answer...