Leaf-spring mounting kit includes 2-1/2" tall front hangers, 4-1/4" tall center hangers, 2-1/2" tall rear hangers and necessary hardware. Equalizers are 7-3/4" long. Components for mounting axle to springs sold separately.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at trailer.com. Today, we're gonna take a look at the tandem axle trailer hanger kit for double-eye springs. Now, this hanger kit will allow you to attach four leaf springs to your trailer frame. Now, the leaf springs we do sell separately on our website. This kit will basically include everything laid out here on the table.
It includes all the hangers you need, the equalizers, the shackle straps, the shackle bolts, and the shackle nuts all included. Now, this is designed for use on trailers that have tandem 2,000-pound to 7,000-pound axles. And it does not include the components for mounting the axle to the springs. Now, we're gonna go through all these just to show you the size of 'em. We'll start with, let me just zoom in a little bit here and we're gonna measure 'em.
We'll start with the front and rear hangers, that'll be the smaller. There's four of those. And basically, these are 2 1/2 inches tall, and when you measure the hanger, a hanger is always measured from the top to the center of this bolt hole down here. So if we put a ruler on it from the center to the very top, it's gonna be right at 2 1/2 inches tall. And again, that's for the two front and the two rear hangers.
Now, the two taller ones, those are the center hangers that the equalizers will connect to. Those, the same way you measure from the center of this hole to the top. So if we put a ruler on it, you're gonna be right at 4 1/4 inches tall for the two center hangers. Now, the equalizers, there's two of those right here. These are curved equalizers.
And again, the length of 'em will be measured center of this hole to the center of this hole. So if we put a ruler on it, there's your 7 3/4 inches length for the curved equalizers. The shackle straps, there's eight of those. Those again, center to center on the bolt holes. So if we measure it, it's right at 2 5/8 inches long on the shackle straps. The shackle bolt comes with 14 of those. Those are gonna be three inches long and they're measured from the bottom of the head to the end of the bolt. So there's your three-inch measurement. The diameter on these bolts are 9/16 of an inch, and then it comes with the 14 9/16-size diameter lock nuts. But that should do it for the review on the tandem axle trailer hanger kit for the double-eye springs..
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.