What Are The Two Upper Holes In Short Hangers In Tandem-Axle Trailer Hanger Kit APT8 For?
Updated 05/17/2021 | Published 05/14/2021
Question:
1. Ive noticed on some of the leaf spring hangers that some have two holes on the top and some do not. The ones with two holes on the top, are those hangers designed to be bolted to the frame? 2. Equalizer dimension. Are the dimensions for the equalizers measured from bolt hole centers of the two bottom holes or from the center of the bottom hole to the center of the middle/top hole? Thanks,
asked by: Allan A
Expert Reply:
I am happy to help!
Starting with the two holes in the shorter hangers included in the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center # APT8 you were looking at. Those holes are not for bolting but instead are for plug welding the hanger to the frame if you choose. You could also just have the hanger welded all the way around.
Moving on to the equalizers. The length of the equalizer are from center of one horizontal hole to the center of the other horizontal hole as shown in the included diagram. The # APT8 includes two equalizers that are 7-3/4" long measured this way.
I included a video of the # APT8 for you to take a look at.
(click to enlarge)
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of EZ Loader Trailer Suspension Parts - Hangers - CES54BR
- Video: Review of EZ Loader Trailer Suspension Parts - Hangers - CES22JR
- Q&A: Internal Dimensions for Suspension Hangers
- Shop: EZ Loader Equalizer Shackle Hanger - Tandem Axle - Galvanized - Bolt-On - 3" Frame - Qty 1
- Shop: EZ Loader Over the Frame Hanger for 2" Wide Frame - 13/16" Bolt Hole - Qty 1
- Shop: EZ Loader Equalizer Shackle Hanger - Tandem Axle - Galvanized - Bolt-On - 2" Frame - Qty 1
- Shop: Trailer Wiring
- Search Results: 13~10
- Q&A: Will 8,000LB Trailer Leaf Springs Improve Ride Quality On Grand Design 7,000LB Axles?
- Search Results: leaf springs
- Shop: Suspension Enhancement
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: bk2 100 bearing kit
- Shop: Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Shop: Suspension Bushing - Nylon
- Shop: Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
- Search Results: 41947
- Shop: Trailer Hitch
- Q&A: How are Fulton Plastic Top and Side Step Fenders Attached to Trailer
- Video: Feature Breakdown: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles
- Video: Review of etrailer 7 Leaf Double Eye Spring - e89FV
- Video: etrailer And Dexter 7-Leaf Double-Eye Spring Comparison
- Video: All About the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles
- Search Results: spring hangers
- Video: Review of Pacbrake Vehicle Suspension - Alpha HD Rear Axle Double Convoluted Air Bag Kit - PB85RV
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: Are Trailer Leaf Spring Shackles Supposed to be Angled or Totally Straight
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Where to Position the Trailer Axle?
- Q&A: Should I Replace The Brakes On My 4,400 Pound Lippert Axles?
on Trailer Suspension Parts
