How Tight to Get Shackle Bolts on Trailer Suspension
Updated 05/17/2021 | Published 05/13/2021
Question:
I see the shackle bolts have a spline on the top, just under the head of the bolts. If I purchase these, should I tighten the bolts until the splines go through the shackles and the heads of the bolts are flush with the shackles? Thanks.
asked by: Jon W
Expert Reply:
Yes when tightening the lock nuts of the shackles of the trailer suspension kits you want to tighten them down to the point that the bolt goes all the way through and the head is flush like you said. The nut only needs to be that tight as the suspension needs to be able to move without tension.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Search Results: trailer suspension parts
- Search Results: trailer leaf springs
- Search Results: accessories and parts
- Video: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs Review
- Q&A: How to Determine Hanger Spacing on a Tandem Axle Trailer
- Shop: CE Smith Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - Galvanized
- Shop: Dexter Double Eye Leaf Spring for 2,000-lb Trailer Axles - 20-1/4" Long
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: trailer jack
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Shop: Brake Controller
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Article: How to Measure for Trailer Hitch Drop
on Trailer Suspension Parts
