Parts Needed to Convert a Torsion Axle Trailer to a Tandem Spring Axle
Updated 10/27/2025 | Published 02/27/2025
Products Featured in This Question
Question:
Im trying to convert my torsion axle trailer to a tandem axle trailer. I want to use springs Tru42FR and a narrow equalizer. The tire size im using is 5.30-12 and i would like the tires closer then further away. Is there a simulator i can use to plug and play some equipment?
asked by: George
Expert Reply:
Hey George, what do you mean by narrow equalizer? What size equalizer do you have right now?
To convert your trailer's torsion axles to spring axles, you'd need to have new hangers welded on, leaf springs, and a new axle. For new hangers, you can use # APT8 which'll work best with axles that are rated between 2,000 and 7,000 lbs. For springs, you can use the # TRU42FR you were looking at with the U-bolt kit # APUBR-10.
Finally, for an axle, you're going to need to measure or know the distance between the hub face, as well as the wheel bolt pattern. For instance, if you measured 60" and your wheels have a 5 on 4 1/2 bolt pattern, then the Dexter Trailer Idler Axle w/ Hubs # 20545I-EZ-60-15 would work great.
To bring your tires closer to your trailer, you'd just have to use a smaller width tire. So since you have 5.30-12 tires, which are 5.6" wide, you could use a 4.8-12 tire instead like # AM30590 which is 4.9" wide.
As far as a simulator goes, we unfortunately don't have something like that and I'm not aware of anything like that floating around. But, if there is anything else I can do for you, please feel free to drop a comment and let me know!
Product Page this Question was Asked From
Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 5-3/4 Inch Long
- Tandem Axle
- etrailer
more information >
Continue Researching
- Search Results: lift kit vehicle suspension
- Search Results: morryde cre3000
- Search Results: equalizer
- Search Results: dexter torsion axle lift kit
- Search Results: hanger
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: Dexter Heavy-Duty Shackle Link for 1-3/4" Wide Double Eye Spring Suspension Kit - Qty 1
- Video: Breaking Down the MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers
- Shop: Step Wet Bolt for 1-3/4" Double Eye Springs
- Shop: Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 2-5/16" - Qty 1
- Shop: Equalizer Suspension Bolt with Grease Zerk Fitting - 5-1/4" Long
- Video: Review of Pacbrake Vehicle Suspension - Towing/Load Leveling Rear Block Kit - PB43RV
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs - 38" Axle Spacing
- Q&A: What Are The Dimensions Of Dexter Shackle Bolt For Double Eye Springs 007-126-01?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Shop: Suspension Enhancement
- Video: Hands-On with the MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers
- Video: A Closer Look at the Bronze Bushing
- Video: Installing the Dexter Torflex Lift Kit
- Video: MORryde Rubber Equalizers for Tandem Axle Trailers: The Breakdown
- Video: What to Know About the Firestone Axle Bracket Extension Kit for Lifted Vehicles
- Search Results: trailer leaf springs
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How to Choose Correct Replacement Leaf Springs and Equalizers for a 2021 Coachmen 259FKDS
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement Leaf Spring for 2015/2016 Riverside Retro 195
- Q&A: How to Find if Dexter Heavy-Duty Suspension Kit Will Fit on Trailer
on Trailer Suspension Parts
Lazer S.
10/27/2025
Hey George, how did things go with converting your trailer to a tandem axle using the new hangers and springs? Your update could make it easier for others planning a similar setup.