Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This incandescent trailer fender light shines in two directions to keep your trailer visible from the front and back. The amber lens faces forward, and the red lens faces rearward, marking both ends clearly for added safety. With two 194 bulbs and a total power draw of just 0.4 amps at 12.8V, it provides reliable illumination without overloading your electrical system.
The built-in reflex reflector eliminates the need for separate reflectors on your fender. It’s molded right into the lens, so you get visibility even when the bulbs aren’t lit. That means fewer parts to install and maintain while still meeting DOT P2 standards for safe marking lights.
Made with tough polycarbonate materials, this light holds up well against vibration, impact, and typical wear on the road. The red and amber lenses stay clear and solid even after long-term use, giving you dependable performance in all kinds of conditions.
Installation is simple thanks to the pre-wired setup with a grounding eyelet and female barrel connector. The included surface-mount bracket makes it easy to attach directly to the fender using standard hardware (not included). With an overall size of 8-1/2" long by 3-1/4" wide and 1-1/2" between mounting holes (center to center), it fits neatly without modification.
This light meets DOT P2 requirements, producing a focused 90-degree beam spread that’s ideal for clearance lighting. It’s designed for 12V DC systems and backed by a 3-year warranty for peace of mind on the road.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Impressive size! Fits all the way to the outside edge of aluminum fenders for double axle enclosed trailer. Includes ground wire. Strongly recommend mounting with self locking nuts and bolts of stainless steel or chrome. Self tapping screws WILL work loose when mounted in aluminum sheet metal - guaranteed.
Next day shipping----FREE next day shipping just doesn't happen anymore?? but it did!!!
The appearance is great, but has problems. Lights can go off because of poor bulb contacts. Moisture shows up on the inside of lens after a rain.
To make it better... seal the lens with RTV. Manufacture needs to change the lights to LED's... to have reliable lights.
An exact duplicate of the ones I was replacing on my US Cargo box trailer. Did not have to mess around with cutting and drilling. Always thankful for that. But, in fact - better construction and sturdier than the oem's. Even the wire connector was supplied and attached. And they shipped it super quick. Very pleased.
Our local repair and parts store could not find the proper lights for my trailer from their online connections. I was confused after spending ten minutes looking on the web to find etrailer might have the lights I needed, because, other sites displayed the part, but actually were out of stock and no longer were continuing the item. Admittedly, I ordered with little faith and waited for an email telling me the part was discontinued. However, to my surprise, the part arrived on time as promised exactly as I needed. Needless to say I am VERY pleased with etrailer. For giggles, I intend sending a link to my local store for the obvious.
This was exactly what I needed. The mounting holes matched the original. Easy to install in five minutes or less. Great product. When the need arises, I will shop trailer again.
Product was exactly as described , looks and works great fit perfect
just as it should. thanks etrailer for having what I needed and at a great price too.
Francis
10/9/2020
Great product and has performed flawlessly
NICE LIGHT
Great service, fast service
As always when I order from etrailer I recieved my item promptly Shipping costs are reasonble and product cost is too
John W.
4/10/2019
Still working fine
Exactly what I needed. Fast service. Will use again.
Well I got the lights on the fenders. they went on without any problems. They are nice to assemble all you need to do is strip the hot wire and crimp it. anchor the ground, tuck the excess wire between the lights inside. Screw the lights to the fender using (3) #8 self tapping screws and you done! they light up nice too, I am very pleased with the and the look.
Brad
8/5/2016
I really liked all the products I bought at E trailer. Everything I got from you works just beautiful, and the lights are super bright. Thanks for all the great products.
I had a blow out on my trailer that took the fender which I replaced. Your marker lights were exactly what I needed so I purchased and installed both the left and right fender marker lights. Installation was easy. The heat shrink on all connections will insure that the lights will work for a long time.
Mike O.
9/2/2017
The light are still working.
The parts were a perfect match for the old ones on my trailer as rocks and age took it's toll. I would buy again as shipping was fast, parts were right and had no hassles. I bought 2 tail lights and 2 fender marker lights. Thanks for the great job guys! I will buy from you again as needed.
Robert
10/24/2019
Still in great shape with no problems!
fast shipping
I would give you guys a 5 excellent prompt service and shipping
They look like there going to work.
Ease of finding the exact and correct part, easy website use, quick results in receiving shipped items. A sincere thanks.
These were perfect replacements lights for my box trailer. They've worked very well. I ran a bead of clear silicon along the top of each lense is insure against any water infiltration. They were quit easy to install.
I have a 2010 international trailer. I was unable to find exact match parts so I went to etrailer to find comparable parts. I replaced both fender lights on my trailer. They were easy to install and wired exactly as the previous lights. What I liked about these is that the light goes to the edge of the fender showing the exact edge. My previous lights sat in the middle. Minor detail but I liked it.
Product was easy to identify on the website.
Shipping and transit time was excellent
Price point was very good
I was replacing the lights on both sides of the trailer. Both were damaged, one of which was beyond identification. There was enough of the one side that I was able to estimate a replacement.
The lights were exact replacements for the original lights. bolt patterns matched up exactly and the ground wire came with a connector already installed so installation was FAST.
EVERYTHING I have received from etrailer.com has been spot on and easy to install.
You guys are great, I will continue to order all of my trailer stuff from this company
Arrived on time and exactly what I ordered replaced the old one on a 17 year old trailer and the new one is working great
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Denny S.
9/2/2015
Still working fine. Great product!