Availability of Optronics Trailer Fender Light w/ Reflector With LED
Updated 09/26/2025 | Published 05/02/2025
Products Featured in This Question
Question:
Looking at BA44FNR and BA44FNL Trailer fender lights. Do you make these lights with LEDS?
asked by: Ken M
Expert Reply:
Hey Ken! The Trailer Fender Light w/ Reflector # BA44FNL and # BA44FNR are only available with incandescent bulbs. Are you ok with a different design? You may be able to use the LED Trailer Fender Clearance Light # DG52444VP and # DG52443VP if you aren't attached to the look of the Optronics lights. If you wanted the Optronics design in LED the only option right now would be to swap out the bulbs with # ARC88FR and # ARC78FR but that increases the cost of the lights quite a bit.
(click to enlarge)
Product Page this Question was Asked From
Incandescent Trailer Fender Light w/ Reflector - 2 Bulbs - Red and Amber Lens - Driver Side
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Rectangle
- Surface Mount
- Submersible Lights
- Incandescent Light
- 8-1/2L x 3-1/4W Inch
- Amber
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: fender mount led trailer lights
- Shop: TecNiq Heavy Duty Bicolor Mini Fender Light - Red / Amber
- Video: A Closer Look at the Incandescent Trailer Fender Light w/ Reflector
- Shop: LED Trailer Fender Light w/ Mounting Bracket - Waterproof - 2 Diodes - Amber/Red Lens
- Shop: Optronics Thinline LED Trailer Fender Light for Trailers Over 80" Wide - 10 Diodes - Amber/Red
- Shop: LED Trailer Fender Clearance Light - Weatherproof - 2 Diodes - Amber/Red Lens - Driver Side
- Shop: LED Trailer Fender Clearance Light - Weatherproof - 2 Diodes - Amber/Red Lens - Passenger Side
- Shop: LED Clearance Light Assembly for Trailer Fender - Trailers over 80" Wide - Passenger Side
- Shop: Incandescent Trailer Fender Light w/ Reflector - 2 Bulbs - Red and Amber Lens - Driver Side
- Q&A: Looking For Replacement 7-Way Plug With Double Prong Design
- Q&A: Will 16 inch Aluminum Trailer Wheel have 110 PSI Rating
- Q&A: Can The Dexter Oil Bath Trailer Hub and Drum Assembly Be Used On A Grease Axle?
- Q&A: Replacement Trailer Grease Seal for PHLE AD3135N Seal
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Troubleshooting An E5 Error On A Dometic AC system With An Advent Replacement Rooftop Unit
- Q&A: Replacement Bolt-On Disc Brake Actuator for Tie Down 70E
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Lighting Requirements
- Article: Trailer Maintenance Schedule
- Article: How to Measure for Motorhome Steps
- Article: Dealer Spotlight - Taps Truck and Auto Accessories
Robin H.
9/26/2025
Hey Ken, did you decide to go with the LED option or stick with the incandescent lights for your trailer fenders? I'm curious to know what worked best for you, as it could help others make a similar decision.