Dimensions Of Optronics Fender Trailer Clearance Light Assembles For Trailers Over 80 Inches Wide

Updated 04/09/2015 | Published 04/08/2015

Products Featured in This Question

Incandescent Trailer Fender Light w/ Reflector - 2 Bulbs - Red and Amber Lens - Driver Side

(1051)

$11.55

Incandescent Trailer Fender Light w/ Reflector - 2 Bulbs - Red and Amber Lens - Passenger Side

(1051)

$21.24

Question:

I am interested in product BA44FNL and BA65ARRB and would like to know the dimensions of the actual light units, not including the attached cord/cable.

asked by: Doug H

Expert Reply:

I pulled the 2 trailer lights you asked about so that I could take some measurements you wanted.

I have attached a couple of photos with the dimensions noted on the photo. Part # BA65ARRB measures 5-7/16 inches long and 3-3/16 inches wide, and is used for the right side of the trailer. For the left side you would need part # BA65ARLB.

The # BA44FNL measures 3-1/16 inches wide and 4-13/16 inches long without the mounting hole flange, and 5-3/8 inches long when measuring with the mounting flange. This is the light for the left side of the trailer. For the right side you would order part # BA44FNR.

These lights are typically mounted on the top of the fenders on trailers wider than 80 inches. They have both the amber clearance light for the front and red clearance light for the rear. These lights are waterproof and wired with a lead wire for power and a ground wire.

expert reply by: Jeffrey L