Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Weatherproof clearance/marker light installs on your driver-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-wire pigtail. P2 rated.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at fender clearance and side marker light. Now this one is for the driver's side of your trailer. The combination side marker light and clearance light installs on your trailer's fender. It features a sealed, waterproof construction, and it contains a total of two LEDs, that's one LED per side. Now, LEDs make great replacements for incandescent lights. They last longer, they burn brighter and they're much more efficient.
You don't have to worry about replacing bulbs or worry about burnt out filaments with LED systems.As you can see on this side we have the amber lens, and on this side we have the red lens. The red lens always faces the back of the trailer, amber always faces the front of the trailer. The base is black in color. It's constructed of a durable plastic construction, and it features a two wire design. Yellow wire is for our ground, red wire is for power, and it does have a channel down here to run the wiring.
That you can still maintain a flush mount design.Again this is designed for the driver's side of your trailer. Taking a look at the overall dimensions of the unit starting with the overall width, measuring edge to edge going this direction is 2 1/8 inches wide. Overall length from very front to very back is 6 1/4 inches long, and the overall height is 3/4 of an inch. That's how far it sticks up off the installation surface.When it comes to mounting, these mount holes right here are separated on center by 1 1/16 of an inch and have a diameter of 1/4 inch. These mount holes right here are separated on center by 7/8 of an inch, and will accept 1/8 inch diameter hardware.
Mounting hardware not included.We're going to go hook it up to power, that way you can see what it looks like with some power running to it, and then we'll also be able to turn off our overhead lights so you can see it in a low light setting. Again, the red wire is our power wire, yellow wire is our ground wire.So you can see here it sends out a really nice, consistent signal. Again we have the amber lens and the red lens, so a two LED system. And again this is designed to mount on the fender of the driver's side of your trailer.That's going to do it for today's look at the fender clearance and side marker light.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
Bright light
Very bright little lights, good price.
Exactly what I needed, shipped fast, fair price. Perfect!
Very nice!!
Nice upgrade
Installed easily and works well.
Still works after a year
They are still working after a year
Great lights, nice and bright and easy to see at night!
Good product to replace original equipm ent
Product worked as promised and is still in tact and working properly.
Great product for the price and looks good day or night. Has worked really well
Everything is ok and does perfectly like the old one.
Thank you for your fast service and delevery !
Nice improvement over my old ones.
Ken
11/23/2023
Lights are working great
the best people know what they are doing fast delivery will tell everyone about etrailer
Right part, fits, works, easy
Product has been delivered. anxious to install today. Great resource for a variety of trailer parts.
Happy with purchased fits nice, will replace other side, nice up date to trailer
Products are fantastic and the company communication is top notch. I've ordered several times and and am always 100% satisfied. Thank you
Had them on trailer about a year. Pull it a lot in winter up in Wisconsin in the snow and salt.
No problems and the are nice and bright.
Love them!
These were a direct replacement of those that were installed from the factory, simple replacement, they appear to be the same brand/manufacture.
Same as the other (pass side). Great LED marker light, but a larger housing to put excess wire would be nice.
Great, I think I will enjoy the install, with all that's going on in the World. Thanks for the extremely fast delivery and help with making my selections!
I did make one mistake, the Thin LED Light I order; I think I need to order the base bracket as well!
Excellent quality part. And very quick delivery. I've ordered a number of items from etrailer, very good service.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Leonard
8/19/2024
Working Great!