2-5/8" x 1-1/4". Weatherproof, LED trailer light serves as a side marker light or a clearance light. Unique dragon's eye design with red LEDs. Surface mount - hardware not included. 1-Wire design.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a trailer clearance and side marker light. This light adds or replaces the light on your trailer. It does function as both a clearance or side marker light when properly mounted. It features a really nice weatherproof housing as well as a lens unit. It's very strong and durable. It's got the black plastic base on it.
The clear lens protects the two red LEDs. Now, LEDs are great replacements for incandescent lights. They last longer, they burn brighter, and they're much more efficient. With LEDs, you don't have to worry about replacing the bulbs, and you don't have to worry about brittle filaments.This light features a single wire design for power, and then it grounds at this mounting location through the mounting hardware. Mounting hardware is not included.
It mounts on the surface of your trailer, and it does feature the cutouts here in the base, so that way you can run the wiring out and still maintain that flat surface mount design.It is SAE and Department of Transportation compliant. Taking a look at the measurements real quick, starting with the overall length of the unit, measuring edge to edge we're looking at about two and five eighths inches. Edge to edge going this direction is about an inch and a quarter. The overall depth or thickness is three quarters of an inch, and the mount holes on this unit are separated on center by one and seven eighths of an inch, and the mount hole diameter is a quarter inch.We're gonna go ahead and hook it up to power, that way you can see what it looks like with some power running to it, and then we'll also be able to turn off our overhead lights. That way you can see it in a low light setting.
Now, you can see here it sends out a bright consistent signal. Again, it features two red LEDs with a nice clear lens. Allows plenty of light to come through. The multi-diode design, having more than one LED, really helps optimize the overall light output.That's gonna do it for today's look at the trailer clearance and side marker light.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.