bing tracking image
  1. RV Vents and Fans
  2. MAXXAIR
  3. Roof Vent
  4. Vent
  5. 12V Fan
  6. Tinted
MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke
MAXXAIR

MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke

In Stock
$192.74
RV Vents and Fans
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out. Great Prices for the best rv vents and fans from MAXXAIR. MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke part number MA00A04401K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (279)
  • Q & A (0)
  • Photos

MAXXAIR RV Vents and Fans

Highlights

  • Control your airflow: 4-speed 12V fan moves up to 900 CFM to quickly vent heat or odors.
  • Keep air fresh inside: Ceiling-fan mode circulates air even when the vent is closed.
  • Stay leak-free: Rubber weather seal and UV-resistant ABS flange prevent water intrusion.
  • Let in natural light: Translucent smoke dome brightens the space while blocking glare.
  • Easy manual lift: Twin support arms and knob hold lid steady, even in strong wind.
  • Simple maintenance: Removable bug screen pops out for quick cleaning.

Features to know about

Keeps Air Fresh with 12V Fan: 4-Speed Control for Comfortable Airflow

The 12V DC fan gives you four speed options so you can move air out fast or keep it gentle and quiet at night. It pushes up to 900 CFM and even works in ceiling fan mode when the vent is closed to circulate air inside. The sealed, fuse-protected motor stays protected from dust and moisture, so it keeps running smoothly for the long haul.

Close-up of MaxxFan roof vent motor assembly showing sealed 12V fan and motor components for RV ventilation

Flush-mounted control keypad on MaxxFan roof vent showing power and speed buttons for manual operation

Stays Leak-Free and Durable: High-Density Polypropylene Smoke Dome

The smoke-colored dome is made from high-density polypropylene that’s tough enough to handle sun and wind. It seals tight with a rubber weather seal to help prevent leaks when closed. The low-profile shape blends into the roof for a clean look while still letting light filter through.

Smoke-colored manual-lift dome of MaxxFan RV roof vent with twin support arms for stable airflow

Opens Smoothly with Manual Lift and Twin Arms: Simple Knob Operation

The manual-lift design uses two sturdy arms that keep the dome steady even in strong wind. A hand knob underneath lets you raise or lower it easily—just pull it out, turn to your spot, and lock it in. The twin arms and locking knob make it solid and secure every time.

Manual adjustment knob on underside of MaxxFan roof vent used to open and close dome lid

Installs Fast into Standard 14" x 14" Opening: Fits Roofs 2"–6-1/2" Thick

This vent fits a standard 14" x 14" roof opening and works with roof thicknesses from 2" to 6-1/2". It comes with a white interior trim piece, insulated connectors, and hardware for installation. The molded ABS flange has smooth edges and a built-in rubber seal that helps keep water out once mounted.

MaxxFan roof vent with attached MaxxAir FanMate cover showing rain protection and mounting tab alignment

Easy to Keep Clean: Removable Bug Screen with Clip Mounts

Four built-in retainer clips hold the bug screen in place to keep insects and debris out. When it’s time for cleaning, twist the clips and the screen pops right out. It’s quick to remove and reinstall, making maintenance simple.

Removable bug screen with retainer clips for MaxxFan RV roof vent preventing insects from entering

Specs

Fit

  • Fits: roofs 2" - 6-1/2" thick
  • Opening size: 14" wide x 14" long

Dimensions

  • Overall dimensions (outside of flange to outside of flange): 18-1/8" long x 16-1/2" wide
  • Garnish dimensions: 16-1/4" long x 16-1/2" wide
  • Vent extends above roof: When closed: 4-1/4"; When open: 12-1/4"
  • Overall fan diameter: 12"

Performance

  • Fan capacity: 900 CFM
  • Quantity of fan blades: 10
  • Power draw: 5 amps

Warranty

  • Vent assembly: 2-Year limited
  • Dome: Limited lifetime

Note

Not for use above tubs, showers, or range cooking surfaces.

00B04401K Max Air Max Fan RV and Trailer Roof Vent - Smoke Dome

Replaces MaxxAir 00A04401K

Item # MA00A04401K

Installation Details MA00A04401K Installation instructions



Customer Satisfaction Score:

Ratings & Reviews

4.7

279 reviews
Review sort icon
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.

by:

This item is an edition in the living area to aid in removing heat and add window circulation. Bathroom already had the same unit and I've used these before with great success.

Charles profile picture

Charles

5/19/2022

Doing very well as expected. This is not my first installation as Ive installed several in trailers over the years with great results each time.



by:

Working on building a custom camper and this is just what I needed for a roof fan. Haven't installed it yet, but I did connect it up to a battery just to see how much air it would move. It's very quiet on speeds 1 and 2. 3 and 4 are a little noisier but it can really move a ton of air once its spun up that fast. I was really impressed with what this little fan can do.

Kevin S. profile picture

Kevin S.

4/30/2021

Been working great. Weve had our camper out several times and this fan has been an integral part of keeping our space well ventilated.



by:

Love this fan, use it to ventilate my Lance truck camper. Works really good when I'm cooking, etc. Installation was easy. Just make sure you have 12 volt power wires nearby. One of the better upgrades I've installed on my Lance.



by:

The fan works great! Take your time with the install, measure twice cut once. Customer service is great !!



by:

Great fan for the price. Installation was easy. You will spend time removing the old dicor on the roof if you are replacing a fan like we did but it was worth it.

Scotts758 profile picture

Scotts758

8/13/2019

Great still!



by:

Fan works great. It's quiet and improved the air flow in the travel trailer tremendously.
Brfore you couldn't get enough air moving through the trailer to keep it cool without the air conditioner.
The install was easy. It replaced an existing vent and there was 12 volts there already.



by:

MaxxFan works great, helpful install video made it a piece of cake. thanks eTrailer!

William profile picture

William

8/20/2023

Still works great, very happy with this fan and e trailer!



by:

Don’t make the same mistake that I did. Buy the fan that has the motorized opening and closing of the lid.



by:

Xcellnt Vent - Installed my vent a yr ago (long story), but only made it operational 10-2018, so I Very much like that it's manual, so i could open/close it without power. Best feature, dual lift arms. Able to drive with the vent open without the lid flapping "Very Stable". A great "Basic" fan vent without all fancy stuff like Rain Sensor, Thermostat, Variable Speed, like my last one that ends up not working after parts are no longer available. 4 speeds is enough. It's Quiet. Lifetime Lid Warranty "Awesome", my last one spider cracked from UV. Only option I'd like to see is "reverse". Doesn't feel like it's moving much air with the lid closed but I have not as yet used it as a ceiling fan to circulate heat. If it does it will be the perfect vent. I will be putting it to that test in the coming months so the jury is still out on that one.



by:

The MaxxFan roof vent arrived much faster than an anticipated. I havent installed it yet so can not comment on performance. etrailer is very easy to order from and great on explaining deatails about the items.

Larry H. profile picture

Larry H.

10/18/2021

I have ordered several products from trailer and have been very pleased with each. The max air fan works great. It took me a bit to work up the nerve to cut a 14” by 14” hole in the roof of van but no worries, the installation went well.

Larry H. profile picture

Larry H.

10/18/2021

I have ordered several products from trailer and have been very pleased with each. The max air fan works great. It took me a bit to work up the nerve to cut a 14” by 14” hole in the roof of van but no worries, the installation went well.



by:

This fan works great in our camper. I like the smoke colored lid, because it helps keep the bathroom cooler. The fan is strong and pulls out all heat, moisture and odor from the bathroom. I wish we had replaced our old fan sooner, this is a much better product!

Anita profile picture

Anita

10/18/2022

A year later, this maxxfan vent is still working perfectly. We have had no troubles. I would definitely recommend.



by:

Nice fit, very powerful, very adjustable, and much quieter than the unit that it replaced. Appears to have an option for a winter cover, based on some additional female sliding holes of some sort? that I know nothing about.

Heather A. profile picture
Etrailer Expert

Heather A.

11/21/2017

Gregory, Thank you for your review. This Maxxfan includes molded mounting tabs to install a FanMate vent cover. The FanMate part 955003 slips over the molding tabs and clips on to provide superior rain protection.



by:

Overall, I think the fan is a great addition and improvement to my, or any, camper. I installed it in the bathroom to replace the typical small fan vent you get from a manufacturer. I only wish it was able to go in reverse so it could blow in air. This one only pulls out.

Matthew profile picture

Matthew

8/10/2022

I am still satisfied with my purchase. The fan works great and is much quieter the the factory mini fan.



by:

No issues at all



by:

Fit perfect and works great.



by:

Always great service and fast shipping.



by:

Well packaged. Great installation video. Only complaint is that it was delivered 4 days after anticipated date, that isn't shipper's fault. Installation was a snap after I removed all the old sealant, etc.Very pleased with this product.



by:

I havent hooked it up to power yet but the install was easy once I got the hole in the van the right size. I did opt for getting different hardware. I purchased machines screws and bolts, which worked much better than the wood screws the fan came with.



by:

I installed this fan in a home built camper that I filmed while building and posted the entire build on You Tube. The fan has help up perfectly and on low speed it will run a very long time with out recharging the battery. I have built five of these small campers and four of them have been equipped with this fan.



by:

Great instructions. Very nice product. Installed nicely and looks beautiful. You will need to buy the butyl tape to properly install and of course the self leveling roof sealant.



by:

Perfect OEM replacement.



by:

Great product



by:

delivery was quick and install was easy



by:

I received my fan about three days earlier than expected, which was a great surprise. Everything arrived complete and well-packaged, and installation was quick and easy. The fan works exactly as expected—no issues at all. Fast shipping and a quality product. Highly recommended!



by:

This vent fan helps a lot with keeping my 7x14 cargo trailer cool. Did a lot of modifications with my trailer especially insulating the ceiling and now with this fan makes it better and cooler. The lid is always open to let the heat out because i have the MaxxAir II cover so rain cant get in. Fan runs better with more or bigger airflow from the side vents when all doors are closed so i added the Redline II popup vent and it works great. Fan does not slow down.
Im glad i got this and will be purchasing again when i get another trailer.
Thanks ETrailer

Leslie profile picture

Leslie

2/11/2021

Still Awesome


25
25

See what our Experts say about this MAXXAIR RV Vents and Fans

  • Air Conditioner and Heater for Cargo Trailer
    Hey Harry! For an AC system on your 6 x 12 cargo trailer I recommend one of the following: -Advent Air RV Air Conditioner System - Manual - 13,500 Btu - White - R32 # ADV23SR -Advent Air Low Profile RV Air Conditioner System - Manual - 13,500 Btu - White - R32 # ADV45SR The only real difference here is the one unit is low profile. This has a lower capacity and is set up for a ductless system which is what your trailer will be. Keep in mind, these aren't approved for a cargo trailer and...
    view full answer...
  • Recommended Hitch and Installation Time for a 2024 - 2026 Chevrolet Blazer EV
    Hey Kirsten. The Draw-Tite item # DT86KV is a pretty simple install so it shouldn't take a shop longer than an hour or two to install it on a 2024 - 2026 Chevrolet Blazer EV. There's no wiring to avoid or body panels that need to be removed. You just need to remove and trim a bit of the lower fascia. Fishing the bolts through the frame rails is going to be the most time consuming part so you may want to check with one of your installers to see how quick they're able to do that. The installation...
    view full answer...
  • Difference Between MaxxAir MaxxFan Mini Roof Vent and MaxxFan Roof Vent
    The difference between the MaxxAir MaxxFan Mini Roof Vent # MA00-04401M and the MaxxFan Roof Vent # MA00A04401K does indeed simply have to do with its profile. The MaxxAir Mini Roof Vent will only extend 2-7/8 inches above the roof when it's closed compared to 4-1/4 inches on the standard model. The MaxxFan Mini will also work with a thinner RV/Camper roof as it is compatible with roof thicknesses of 1 inch to 6-1/2 inches (compared to 2 inches to 6-1/2 inches on the standard unit). As...
    view full answer...
  • Can I Use the MaxxFan Manual Lift Fan with My Existing MaxxAir Vent Cover?
    Hello Eric, Yes, the MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke # MA00A04401K will work great with your existing MaxxAir Standard Roof Vent Cover, so that is a really good option for your bathroom vent. That fan is made for the standard 14" x 14" roof opening and is designed to work with an external MaxxAir-style vent cover already installed. Since you already have the cover in place and like being able to leave the vent open during rain, you can definitely keep using...
    view full answer...
  • Availability Of Replacement Circuit Board For Maxxfan 4900N
    Hello Paul, thanks for reaching out. If the new motor didn't fix the problem, that definitely points to the circuit board being the culprit. Replacing the circuit board on the MaxxFan 4900N is slightly problematic though. MaxxFan lists the correct replacement as part 10-21275N but sadly this is not something we carry here. Looking around elsewhere online, it does not appear to be readily available. For that reason, the best solution I can offer at this point will be to replace the entire...
    view full answer...
  • Should I Use Smoke or White MaxxAir Roof Vent and Vent Cover
    Both the smoke and white colors will be the same in regards to how much heat gets through and will be relatively similar when it comes to light, although the smoke will naturally be a little darker. Since you'll be using the roof vent AND a cover though you won't see as much light either way so my recommendation is to use whichever matches the color scheme of your trailer better. For white you want these parts: Vent - # MA00-04002K Vent Cover - # MA76JR For smoke you want these parts: Vent...
    view full answer...
  • Can a MaxxFan Manual Lift Vent be Converted into a Powered Lift
    Unfortunately, MaxxAir does not have a conversion kit or motor that will turn your manual lift air vent into a powered lift. You may want to replace the vent with the MaxxFan Plus, part # MA00-04500K. It has the same dimensions and features of your current vent but with the added powered lift and controller. I've linked to a video review of this vent for you to consider.
    view full answer...
  • Comparison of MaxxAir MaxxFan "Mini Roof Vent and MaxxFan Roof Vent
    The MaxxAir MaxxFan "Mini" Roof Vent w/ 12V Fan, # MA00-04401M and the MaxxFan Roof Vent w/ 12V Fan, # MA00A04401K are very similar but there is a difference in the profile. The MaxxAir Mini, # MA00-04401M will set at 2-7/8" above the roof when closed compared to 4-1/4" for the # MA00A04401K. The Mini will also work better with a thin roofed RV/Camper as it is compatible with roof thicknesses of down to only 1" where as the # MA00A04401K needs to have a roof at least 2" thick. Otherwise,...
    view full answer...
  • Replacement for MaxxAir # 4050K Roof Vent Fan
    The MaxxFan # MA00A04401K would be a good replacement fan for most any camper. It fits a standard 14X14" opening and features 4-speed exhaust fan, manual lift design, removable bug screen and sealed motor. A new inside ceiling trim piece (garnish) is included. You may want to additionally consider adding the MaxxAir # MA00-955001 FanMate roof cover to help keep the rain out. Additionally, during installation you will need the TremPro # 0160297 roof sealant.
    view full answer...
  • Replacement Remote For MaxxFan Deluxe 5100K
    The Replacement Handheld Remote for MaxxAir Roof Vent Intake/Exhaust Fans # MA00A01150K and the Replacement Remote for MaxxAir Roof Vent Exhaust Only Fans # MA00A01151K is not the same part, and will fit different models. If you have the MaxxFan Deluxe # MA00-05100K, then the remote you need is the Replacement Handheld Remote for MaxxAir Roof Vent Intake/Exhaust Fans # MA00A01150K, not # MA00A01151K. The MAxxAir Roof Vent Intake/Exhaust Fans # MA00A01151K will work with the MaxxFan #...
    view full answer...
  • Replacement Fan Circuit Board for a MaxxFan Roof Vent w/ 12V Fan # MA00A04401K
    I think you have the MaxxFan Roof Vent w/ 12V Fan # MA00A04401K, I didn't find anything using the ma00-04401k number you provided. But that ma00-04401k number is only one digit off of # MA00A04401K. The correct replacement board for the # MA00A04401K fan is the Replacement Printed Circuit Board # MA10-04301k-v16. If you were talking about the flush-mounted key pad with the power button, we do not have that. The # MA00A04401K fan is able to use the Remote for MaxxAir Roof Vent # MA00A01151K...
    view full answer...
  • Where Does The Inner Trim Piece Go On A MaxxFan RV Roof Vent
    The plastic trim piece on your MaxxFan Roof Vent w/ 12V Fan # MA00A04401K is going to fit between the face of the vent and the mounting flange. You'll want to make sure you leave some slack in the black and white wires since the trim is going to kind of fight them for the same space. As for trimming down the trim, I typically push it in as far as it can go and then take a marker around it up against the ceiling. Then I measure everything above that line since this is how long the trim...
    view full answer...
    Image 1 for
  • MaxxFan Roof Vent w/ 12V Fan in White Versus Smoke
    The MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke # MA00A04401K can have the cover replaced with a white one using # MA10A40002K. This is the closest option to clear. If you want a powered lift you can alternatively use the MaxxAir MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 4 Speed - White # MA00-04751KSX which will use the same replacement lid.
    view full answer...
  • Replacement Roof Vent Garnish For 2020 Forrest River Flagstaff With MaxxAir MaxxFan
    To replace the garnish on your MaxxFan Roof Vent # MA00A04401K you will want the Ceiling Garnish # MA54FR. This garnish is 5-3/4" tall and can be trimmed if required to fit the roof height on your 2020 Forest River Flagstaff Micro Lite. The Garnish # MA54FR will also fit 4000K # MA00-04000K 4002K # MA00-04002K 4301K # MA00A04301K 4500K # MA00-04500K 4751K # MA00-04751KSX
    view full answer...
  • Smoked Rain Cover Recommendation for MaxxFan 4401K Roof Vent
    The rain cover you would want to use with the MaxxAir MaxxFan part # MA00A04401K that you referenced is the # MA00-955003 which has the correct hinge design you would need.
    view full answer...
  • Replacement Remote Control For MaxxFan Deluxe Roof Vents
    Sounds like the remote is down for the count and needs to be replaced. If you have the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke # MA00-07500K you will need the Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans - Qty 1 # MA00A01150K. If you have the MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke # MA00A04401K you will want to get the Replacement Remote for MaxxAir Roof Vent Exhaust Only Fans - Qty 1 #...
    view full answer...
  • Recommended Replacement Bathroom and Kitchen Vent Fans for Sunnybrook Scout Trailer
    It looks like you've got a standard roof cutout that is roughly 14" x 14", so for the bathroom I recommend using the MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed # MA00A04401K which has 4 speed settings. If you're looking for something with a powered vent lift, the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan - Powered - 1 Speed - Black # MA00-03851 is a great option. For the kitchen fan you could use one of those fans above, or you could use the smaller MaxxFan Dome Roof Vent...
    view full answer...
  • What is the Amp Draw for the Various Settings on the MaxxAir MaxxFan # MA00A04401K
    The MaxxAir MaxxFan # MA00A04401K that you asked about has a maximum draw of 4-1/4 amps when it is set at it's highest setting. Since this is a 4 speed fan it will decrease about 25 percent for each setting that is one step lower. This means that it will draw about 1 amp per setting. My contact at MaxxAir confirmed this.
    view full answer...
  • How to Remove Bug Screen on Maxxfan 4-Speed Roof Vent
    To gain access to your MaxxFan Roof Vent # MA00A04301K you will need to simply remove the screen by rotating each of the clips 1/2 turn as per the instructions (which I have linked for you). When doing this please be sure that you not only turn off the fan but also have the 12 volt power disconnected.
    view full answer...
    Image 1 for
  • Will MaxxFan Roof Vent With 12 Volt Fan Fit Roof With Slight Curve
    A slight curvature to your roof will not be a problem; you'll be able to install the MaxxFan Roof Vent. This is a pretty common thing on RVs and if you take a look at the accompanying photo, you can see the MaxxFan installed on a trailer with a roof that has curvature to it. The 4-speed MaxxFan you asked about is available in either Smoke or White, so you can choose the one with the color that best suits you: - Smoke: MaxxFan Roof Vent with 12V Fan # MA00A04401K - White: MaxxFan Roof...
    view full answer...
    Image 1 for
  • Replacement Wall Switch for a MaxxAir MaxxFan
    The MaxxAir MaxxFan part # MA00A04401K is not compatible with a external wall switch. Instead, you will want to use the keypad located on the fan itself to control the fan settings. If you instead have a different single speed fan that can be used with an external wall switch then I recommend using part # VC0533-02-A to control it.
    view full answer...
  • Amp Power Requirements for Vent Motors
    The 12V power requirements for trailer vents and fans will vary so you might want to check the main sticker for your fan or look at the sticker on the motor itself to find the unit's power draw. As an example, the MaxxFan Deluxe Roof Vent # MA00-07500K draws 5-amps of current from its 12V supply. A great many vent fan motors will draw this or less power and so certainly some will function with your 8-amp supply. Naturally a vent with multiple speed options will draw less power at lower...
    view full answer...
  • Installing A MaxxFan Roof Vent On A Ford Transit 250 Van
    The MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke Item # MA00A04401K requires a 14" x 14" opening and your wall would need to be 2" - 6-1/2" in thickness so you'd most likely need to build some sort of frame to reach that thickness. As long as you can meet the fit requirements and run 12v DC power to it there's no reason why you couldn't. This fan will stick out 4-1/4" when closed and 12-1/4" when open. Note: this fan is not for use above tubs, showers, or range cooking...
    view full answer...
  • Rain Cover Recommendation for the MaxxAir MaxxFan part # MA00A04401K
    The rain cover you would want to use with the MaxxAir MaxxFan part # MA00A04401K that you referenced is the # MA00-955003 which has the correct hinge design you would need. I attached a review video for more info for you to check out as well.
    view full answer...


< Previous
12




Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Kathleen M
Updated by:
Kathleen M
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Michael B
Updated by:
Michael B
Employee Adam Y
Updated by:
Adam Y
Employee Manda E
Updated by:
Manda E
Employee Cole B
Installed by:
Cole B
Employee Robert C
Installed by:
Robert C
Employee Jacob W
Written by:
Jacob W
Employee Aidan B
Video by:
Aidan B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.