A-frame coupler is made of sturdy steel and has a corrosion-resistant zinc finish with a 200-hour salt spray rating. eZ-Latch ensures fast, easy, secure hookup and disconnect. Includes cutout for your 2-1/4" round jack. Bolt-on installation.
Features:
Specs:
This coupler features a simple-to-use latching mechanism known as the eZ-Latch. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly lined up with the ball when you lower it, and the rest is automatic. Disengaging the coupler is just as effortless. Simply lift up the contoured handle and the coupler socket will automatically release its grip on the ball.
Sturdy, Corrosion-Resistant Construction
Made of sturdy steel, this coupler features a durable zinc coating that is designed to limit rust and corrosion. This coat has a 200-hour salt spray rating. The eZ-Latch's sleek, ergonomically designed handle is constructed of a durable composite material that's corrosion-proof, allowing it to withstand whatever the road and the elements dish out.
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
Ratings & Reviews
Product seems to be what I need. It looks well made.
My representative was very helpful and pleading to work with.
Good Job!
I purchased the premium version of this bolt on coupler. I replaced a cracked welded original, and likes the bolt on feature. Used grade 8 bolts, its not going anywhere. It is extremely beefy, thick and heavy steel. The finish is excellent. It has a 500 hr salt rating. I clamped it into place with C clamps and used the holes in the coupler as templates to drill into the channel steel on the trailer. As a result, a perfect fit. It fits the 50 degree angle of the trailer channels like a glove. The fastening mechanism works very nicely. Unlike other fastener systems, it simply engages or disengages a spring that sets the locking mechanism. It requires that you pull the trailer forward under tension slightly to lock it in place. It has a beefed 5/16” locking pin hole. I purchased my locking pin locally as e-trailer has a 5/16 pin but it is not long enough as specified for this. A pin is not supplied, I don’t think this is normally supplied anyways.
VERY WELL MADE - FIT PURFECTLY
Just as described perfect fit with easy installation. cut off the old and slid the new one right into place. Bolt it on in the morning. need to get the proper bolts (does not come with install hardware).
When my old coupler failed I was very happy to find a bolt on coupler this heavy as most are weld on for a trailer this heavy. I wish I would have changed the coupler years ago. I always had trouble with the old one. This one is so easy to latch and unlatch from my truck. It is great quality.
Heavy duty for sure. Drilling 1/2” holes in 1/4” thick angle iron on the trailer required more than a hand drill, but other than that installation was simple. Removing the original coupler was a chore because it was welded on both top and bottom. I had to use a hacksaw (3 blades), 2 lb mallet, large crowbar, steel chisel, grinder. Fortunately I had all that, and I’m very pleased with the result.
My old coupler was pretty used up and rated at only 5000 lbs for a 10,000 lb trailer so it had to go.
The new bolt-on 10,000 lb coupler is quality. I like the EZ latch because its smooth, self latching and easy. The job was about four hours including removing old coupler, welding some new channel in and drilling holes. New coupler looks good, works great, and trailer is safer.
Right now 7 of my trailers have Demco ez-latch couplers on them. And as I get to it,I'm going to switch out the rest of them. So eventually evry bumper pull I have will be Demco ez-latch. They are the easiest most secure coupler I've used.
The coupler that came with our teardrop did the job, but getting hooked up and secure on the ball was a real pain that would take multiple attempts to reposition it before it dropped fully in place. I like the Demco eZ-latch. So much better. I uploaded 3 photos: 1) original coupler, 2) trailer frame with new holes drilled and old holes filled with Bondo, 3) Demco coupler in place. The changeover was very easy.
Best coupler I've ever had. Reliable and easy to hitch and unhitch with your fingertips. Never gets stuck, never requires a mallet or tools to unhitch. Well built and great design.
Very good quality, construction, and finish. This was used to replace a 5000# rated coupler on my RV trailer that was just not strong enough. It has an extra 2-3" of length than the old coupler so make sure your safety chains have enough length to accommodate the extra length. One bonus for me was that the extra length was just enough to allow me to open the back door of my SUV with the trailer hitched (which I couldn't do before). The DEMCO coupler does take a 2 1/2" wide hitch pin /lock which is different than most couplers.
Quick and fair transaction!
Got it fast, easy to order and showed up exactly when it said it was going get here
Good quality USA made part.
Good product and easy install.
good product. Good communications.
Fit perfectly. Heavy duty and high quality. Smooth operation.
Great fit.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.