See what our Experts say about this Lippert Trailer Suspension Parts

• Wet Bolt that is Long Enough to be used with Correct Track Lift Kit
  Hey Jerry, we do have one wet bolt that is long enough to be used with the Correct Track lift kits part # RR23QX with the part # LC126197. This is about half an inch longer than standard suspension bolts.
  view full answer...
• Replacement Wet Bolt for Lippert Road Armor on 2023 Keystone Montana 3123RL
  For a replacement wet bolt on your Road Armor # LC696740 you can use the # LC126197. For a flange nut you can use # LC122103. If you're looking for the full AP kit the correct part is # LC52SV.
  view full answer...
• Replacement Wet Bolts For Lippert Shackle Kit On Road Armor Suspension.
  We have the Bolt # LC126197 which is the bolt used for the shackle links. We also have the Bolt # LC126238 which connects the leaf springs to the hangers. The 7/16"-20 Flange Nut # LC122103 will fit both of these bolts. These are the parts for the Kit # LC52SV to mount the Road Armor # LC696740 equalizers.
  view full answer...
• Comparing MORryde and Lippert Wet Shoulder Bolts # MR52HR and # LC126197
  The MORryde Wet Shoulder Bolt # MR52HR and Lippert Equa-Flex Wet Shoulder Bolt # LC126197 are identical in in size. The only difference I can see is the one comes from MORryde while the other comes from Lippert. Both have a length under head of 3-3/8", bolt dimension of 9/16", thread length of 9/16", usable length of 2-13/16", tread size of 7/16"-20 fine and a bolt head diameter of 13/16".
  view full answer...
• Troubleshooting A Wet Bolt That Won't Take Grease
  It sounds like there might just be a clog in either the Zerk fitting or line of the wet bolt preventing grease to pass through. Aside from removing it and trying to clean it out replacement would be the only other option. Depending on the length of your bolt you can use part # LC126238 or # LC126197 for replacement. With wet bolts you'll always want to use bronze bushings as the grease will eat away the never fail/nylon bushings.
  view full answer...
• Replacement Wet Suspension Bolt Recommendation for Montana Trailer with Lippert Correct Track
  The exact bolt replacement you need is the part # LC126197 which is the correct length and diameter plus has the zerk fitting on the end of the bolt as well.
  view full answer...
  
• Replacement Longer Wet Bolt for MORryde X-Factor Crossmember
  I do have an option for you. While we do not have the exact ones from MORryde available by themselves, you can use the Replacement Wet Shoulder Bolt # LC126197 as a replacement for the longer wet bolts in the kit that comes with the MORryde X-Factor Crossmember # MR33WR.
  view full answer...
• Cushioned Equalizer Replacement for 13-10 Dexter Equalizer
  The better fitting equalizer upgrade solution we have for you is the Equa-Flex Cushioned Equalizers # LC279688 which has a distance of 7-1/2 inches between the outer holes and a vertical distance of 4 inches. This will be the closest in dimensions to what you have so it will fit and not allow the height of the trailer to change. This also matches the weight capacity of your trailer too. Then for wet bolts you'd want the part # LC126197 and you'd be set.
  view full answer...
  
• Replacement Grease Zerk For Lippert Equa-Flex Wet Bolt Kits
  Yes, the Grease Zerk # LC44XV for your Lippert Tandem Axle Equa-Flex AP Kit # LC64FR can be replaced as it is removable. Do note that this grease zerk is specific to Lippert as it has a special tapered thread that is not commonly used by other manufacturers. We also have replacement Wet Bolts # LC126238 and # LC126197 if the bolt is damaged or the threads are broken off inside the bolt.
  view full answer...
• Replacement Wet Bolt For a MORryde Suspension Upgrade Kit with 2.25" shackles
  There are two different sized wet bolts used for the MORryde Suspension Upgrade Kits with 2.25" shackles. (1) of the wet bolts is 9/16" Diameter x 3-3/8" long and (1) of the wet bolts is 9/16" Diameter x 2-7/8" long. If you are needing the 9/16" Diameter x 2-7/8" long then you can use the Replacement Wet Shoulder Bolt # LC126238. If you are needing the 9/16" Diameter x 3-3/8" long then you can use the Replacement Wet Shoulder Bolt # LC126197.
  view full answer...
• Recommended Replacement Wet Bolts For 5th Wheel Suspension System
  I do have wet bolts that will match the ones needed for your MORryde SRE 3000 suspension system, but they technically will not be MORryde brand. If this is not an issue, you will need the Replacement Wet Shoulder Bolt # LC126238 and # LC126197. The # LC126238 will measure 2-5/16" long and will be the pivot bolts, and the # LC126197 will measure 3-3/8" long and is designed for the extra spacing with the heavier duty shackles on the springs. This will get you all squared away.
  view full answer...
• Difference Between Replacement Wet Shoulder Bolts for Equa-Flex Suspension Kit
  The only difference between the two replacement bolts is the size. Replacement Wet Shoulder Bolt # LC126197 measures 9/16" x 3-3/8" while Replacement Wet Shoulder Bolt # LC126238 measures 9/16" x 3-1/4". These replacement bolts work with Equa-Flex Cushioned Equalizers # LC279687, # LC279688 and # LC314336.
  view full answer...
• Is The Correct Track Kit Compatible With Lippert Road Armor Equalizer On a 2021 Keystone Laredo
  Yes, the Correct Track Trailer Alignment and Lift Kit # RR23QX will fit with the Road Armor Shock Absorbing Equalizer Kit # LC696740 on your 2021 Keystone Laredo 255SRL 5th wheel. The Lippert AP Kit # LC52SV contains the wet bolts used on the Road Armor Equalizer. You will need 6 of the longer Wet Shoulder Bolts # LC126197 to account for the thickness difference when you add the Correct Track kit. Oui, le kit d'alignement et de levage de remorque Correct Track # RR23QX s'adaptera au kit...
  view full answer...
• Is it Okay to Use Stripped Out Wet Bolt for Trailer Suspension
  The instructions for the Road Armor Shock Absorbing Equalizer Kit like part # LC696740 calls for a specific torque rating when installing the wet bolts and nuts (see linked instructions for specifics). If you aren't able to torque the nuts and bolts appropriately then that can be pretty dangerous once you get heading down the road. If you suspect the hardware is stripped out then I definitely recommend replacing it. Stripped out hardware has never done anyone any good and it's always better...
  view full answer...
• Is There a Wet Bolt With 7/16 - 20 Thread and Zinc Finish
  We do have exactly what you are looking for, which is a wet bolt with a 7/16 - 20 thread with a zinc finish, made by Lippert. There are two of these, with both having a 9/16" hex head, and the only difference being the lengths: - 3-1/4" Long: Replacement Wet Shoulder Bolt # LC126238 - 3-3/8" Long: Replacement Wet Shoulder Bolt # LC126197 Then for a locknut the correct part is the Fastenal Lock Nut # 1137306. I have added links below to video reviews of these parts for you to check out...
  view full answer...
• Measuring Replacement Pivot Bolt for Swing-Away Tongue Hinge to Buy at Hardware Store
  Our manufacturers don't offer the pivot bolts separately at this time, but you could easily pick one up at a local hardware store or a competing online retailer if they offer one. You just need a grade 8 bolt and lock nut that is long enough to go through the pivot hinge. The general rule is to use a bolt that is as long as the height of the frame plus 1.5 inch. Our fold-away hinges come with bolts ranging from 4.5 inches long to 6.5 inches long depending on the height of the frame. ...
  view full answer...
• Determining The Correct Equa-Flex Equalizers For 2011 R-Vision Trail-Sport TS27QBSS
  I would be happy to help you find the correct Equa-Flex equalizers for your 2011 R-Vision Trail-Sport TS27QBSS but you will need to measure your current equalizers as we do not have a breakdown of the specific components used on a trailer. The Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 3K to 6K # LC279687 you were looking at are 5-1/2 wide measured center to center of the horizontal mounting holes as shown in the included diagram. If this matches your current equalizers...
  view full answer...
  
• Can Wet Bolts Be Purchased Individually
  Yes, the Replacement Wet Shoulder Bolt # LC126197 has the same 9/16" x 3-3/8" dimensions as the wet bolts included in the Lippert AP Kit # LC52SV. I also recommend upgrading your bushings to bronze # D014-077-00 if you haven't already as the typical nylon bushings that are usually included from the manufacturer wear away fairly quickly.
  view full answer...
• Cushioned Equalizer Recommendation for Cougar 22MLSWE
  The Lippert Equa Flex kit part # LC279687 is going to be your best choice for a cushioned equalizer upgrade for your Cougar 22MLSWE. It is the exact same dimensions as what you have now so it will fit perfectly as a replacement and will do an excellent job making the ride quality of your RV much smoother. The feedback we've gotten from our customers who have tried it has been overwhelming positive as well. Then for a wet bolt kit that was designed for this kit we have the part # LC64FR...
  view full answer...
  
• Replacement Wet Bolt for Road Armor Suspension on a 2022 Forest River Trailer
  The replacement wet bolt you need for the Road Armor Suspension # LC696740 on your 2022 Forest River is part # LC126197. This is an exact replacement so swapping the bolts will be pretty straightforward.
  view full answer...
• What Bolts Are Needed For MORryde Suspension Kit For Correct Track
  Hey Mike; first, thanks for all that detailed info, and second, everything you said was 100% correct so you aren't missing a thing. You do indeed need two longer bolts with the third generation Correct Track # RR23QX. The MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps # MR58ZR comes with twelve 3-3/8" long bolts and two 2-7/8" long bolts when they should all be 3-3/8" long. Your explanation about the previous Correct Track generation seems...
  view full answer...
• Wet Shoulder Bolt For 2008 Forest River Wildcat 5TH Wheel Using Correct Track Trailer Lift Kit
  The Replacement Wet Shoulder Bolt # LC126197 is 3-3/8" long to account for the width of the Correct Track Trailer Alignment and Lift Kit # LC87120. A typical Wet Shoulder Bolt # LC126238 is only going to be 2-7/8" in overall length.
  view full answer...
• What Size Bolt to Use with Correct Track Hanger
  Hey Mark, the Correct Track kits require 3-3/8 inch long bolts that are 9/16 inch in diameter like the part # LC126197.
  view full answer...
• Replacement Wet Bolts for 2020 Jayco Northpoint 5th Wheel With CRE-3000 Equalizers
  For replacement wet bolts you can use the # LC126238 which is 2-5/16" long or # LC126197 which is 3-3/8" long. I'm not sure which broke off so I would match them to the length of the broken bolts. The length is the usable length of the bolt. This is measured from the base of where the bolt head would have been to the start of the bolt threads. If you don't already have upgraded shackle straps with your wet bolts, you may also want to consider the MORryde Suspension Upgrade Kit for Tandem...
  view full answer...