Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Protect your trailer bearings from water, dirt, and corrosion while making greasing quick and easy. Bearing Buddies maintain light grease pressure inside the hub to help prevent bearing failure, even when your hubs are completely submerged.
Features:
Specs:
Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub. To adjust the amount of grease in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8".
The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel and diluting the grease.
An automatic pressure-relief feature is built into the Bearing Buddy. When the device is full, grease will seep around the edges of the piston and into the barrel. This prevents overfilling that can damage the inner seal.
You can manually check the grease level in your Bearing Buddy by pressing on the edge of the piston. If you can rock or move the piston, the hub is properly filled.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews

Rick S.
2/20/2015
A year later and the bearing buddy is doing its job with no issues to report! I know where to go when I need expert Trailer assistance - eTrailer!

Matt
8/13/2023
1 yr review still work prefect and looking like new only added a 12 of shot of grease to each side Great price at etrailer Thanks Again

Barth T.
7/11/2014
theses also work for the northern tool 5 x 8 trailer... hard to find this sizethanks fits great

Hjrjolie
6/8/2020
Working great! Check the bearing buddy before and after using trailer and keep them filled. Couldnt be happier with my results. I feel confident I wont have any bearing failure for lack of grease!

Dirtstiff
2/18/2018
Bearing Buddy through trailer have given my little tag a long MC trailer trouble free confidence

Kirk
5/23/2025
No issues since installation.

Al F.
8/26/2018
Working out just fine. Need to be less generous with my grease applications to avoid excess passing the rear seals and getting thrown onto the back side of my wheel rims.

Steve D.
3/28/2016
Bearing Buddy is still doing its thing after a 7136.5-mile trip out West over 34 consecutive days during the Summer of 2015. A shorter, 1500-mile roundtrip was made to SC in December. Overall, Im totally satisfied with the Bearing Buddy x2 performance thus far and cant wait for the weather to warm up a little more to take my little tear camper back on the road. Ill be heading east to New England this summer.

Keith V.
6/21/2021
The bearing buddies have worked flawlessly, my trailer is used not only on the road, but in the woods and dusty locations. The bearing buddies have never ped off, and keep the bearings well lubricated a clean.

Brian B.
4/27/2018
Absolutely great!

Mike L.
5/20/2019
This Bearing Buddy is intended to fit a 2.047 hub bore that uses a 07204 bearing race, and is meant to be a very snug fit, to the point where its suggested that a mallet or a dead blow hammer and a block of wood be used to drive it into place.

Bill
11/14/2015
Still working great after a year, Ive had no maintenance issues and have just added grease when needed. Would highly recommend!

Willisonthefly
8/10/2024
Still holding strong. Just regreased everything for this summer season and still rolling on.

Steve
8/28/2019
Great !!!! Such a small feature for a great deal of security in knowing that the bearings will no fail. Been There, Done That !!!

Steve L.
8/16/2018
After 1 year and several hundred miles, theyre still doing great. Very pleased.

Rickey L.
5/11/2018
Great I towed the trailer from Lafayette, Louisiana to Sterges and returned. I would recommend this product to anyone.

Dustin M.
6/8/2018
They are still fantastic no complaints!
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.













Added N.
4/8/2014
part number BB2047 will fit the following Harbor Freight Trailers.. 90154, 42709, 90153.42708, 2575 and 2948, as all those trailers use the same Harbor Freight replacement dust cover, received mine and they installed with little effort great product..Thanks etrailer,com