Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Extend the length of your towing system without having to buy new safety cables. Extensions add an extra 10" so you can use high-low receivers, hitch adapters, and other accessories. Includes quick links for easy hook-up.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Roadmaster 10" Safety Cable Extensions, these are going to extend the length of your towing system without having to buy new safety cables. The extensions are going to add an extra 10" so you can use Hi-Low Receivers Hitch Extensions and other accessories. It's going to come with both cables and 2 quick links. These are going to have a capacity of 8,000 pounds, the cables are a braided steel construction then they have the vinyl coating over the center area right here. The coating's going to help keep the cables from scratching any component of your towing setup and then the cable portion right here with the vinyl, that's going to have a diameter of around 3/8". The quick links, that's these right here, these are made from a steel construction with a zinc finish to resist rusting corrosion.
They do feature the threaded connected for easy connecting and disconnecting. That can be done by hand or you could use a wrench. This will accept a 5/8" wrench or a 15mm wrench. A few measurements that I want to give you real quick regarding the quick link, if we take a look at the overall length that's going to measure about 3 3/16", 3 1/4" right in that area. If we measure the overall width to the outer point there of the barrel, that's going to give us a measurement of about 1 9/16" or 1 5/8" right in that area. The opening that we have right here that's going to give a measurement of about 3/8".
I do want to point out that the diameter of the link right here is going to measure 3/8" but the threaded portion has a slightly larger diameter that's going to measure about 7/16" or a 1/2". Now we'll take a look at the internal dimensions, so the usable space that we have there on the inside, it's going to be about 2 1/2" inches measuring right below that barrel the usable width, it's going to be about 3/4" and then to the barrel on the flat side is going to be about 5/8". The units are really easy to use, the cables are a nice, strong design, strong connection points, vinyl coating, braided steel. A nice, strong, dependable unit and again from the inside edge of this loop to the same point on the other side, that's going to give the 10" extension or 10" length of each cable. That's going to do it for today's look at the Roadmaster 10" Safety Cable Extensions.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
William
5/26/2017
Still very satisfied with the extensions The extensions still work well
George B.
7/16/2018
very satisfactory
Ron N.
9/6/2018
Work well but rusted quickly
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Aaron
2/20/2026
Product works great for my needs of adding safety to my towing. Just needed a little bit extension for making turns.