Quick Links - 1/2" Diameter - Qty 2

Video Transcript for Review of JR Products Safety Chains and Cables Parts - Quick Link 1/2 Inch - 37201345

Ellen: Hey everyone, I'm Ellen here at etrailer.com and today we're taking a quick look at the quick links. These are going to have a half-inch diameter, so it's going to keep your chains, cables, ropes, hooks, any other kind of items secure on your vehicle, on your cargo-carrier, in the back of your truck bed, trailer or whatever the case might be.So give you some measurements to make sure that these are going to be the right fit for you. Again, half-inch diameter. The outer edge to outer edge measurement is about four and a quarter inch roughly. Going the other direction, it's about two inches. Going from this edge to the side of that keeper nut.

If we measure the inside length, we've got about three and a quarter inch of usable space, and then going this way about. say about seven-eighths of an inch because of this nut, it takes up a little bit more space. The throat or the spacing there for what we can actually fit into it, and it's about half an inch wide. It does not require tools to tighten this down, but if you want to put a crescent wrench or a box wrench on there, looks like a three quarter inch would fit, might be a little bit loose, so a 11/16 would probably fit a bit better on that to get it tightened down.You do get two links. They're made of a sturdy steel construction and that's going to have a zinc coating, so you shouldn't have to worry about any rust or corrosion, but that's pretty much all there is to it for our quick links, there are other sizes available if you need something a little bit smaller than that half-inch diameter, so definitely check those out here at etrailer.com but that's going to do it for our look.

Thanks for watching.