1. Accessories and Parts
  2. Roadmaster
  3. Trailer Safety Chains
  4. Tow Bar
  5. Safety Cable Parts
  6. Safety Chain Parts
Roadmaster Replacement Cable Connectors

Roadmaster Replacement Cable Connectors

Item # RM-910022
lowest price pledge
Retail:$27.86
Our Price: $13.83
You Save: 50%
Accessories and Parts
Orders above $50 qualify for Free Shipping
Shipping Weight: 0.52 lbs
Quantity: 
In Stock
Roadmaster Trailer Safety Chains,Tow Bar - RM-910022
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Call 800-298-1624 to order Roadmaster accessories and parts part number RM-910022 or order online at etrailer.com. Free expert support on all Roadmaster products. Guaranteed Lowest Price and Fastest Shipping for Roadmaster Replacement Cable Connectors. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (45)
  • Q & A (21)
  • Videos (2)
  • Photos
  • Why etrailer?

Roadmaster Accessories and Parts - RM-910022

  • Trailer Safety Chains
  • Tow Bar
  • Safety Cable Parts
  • Safety Chain Parts
  • Quick Links
  • Roadmaster


Features:

  • Set of two Roadmaster Replacement Cable Connector

Specs:

  • Weight capacity: 6,000 lbs
  • Dimensions: 3-3/16" long x 1-1/2" wide
  • Connector thickness: 3/8"
  • Quantity: 2 connectors

910022 Roadmaster Replacement Cable Connectors





Video of Roadmaster Replacement Cable Connectors

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for RoadMaster Falcon Tow Bar Installation - 2013 Honda CR-V

All right today on this 2013 Honda CR-V, we're going to install part number RM-522. This is the Roadmaster Falcon All-Terrain Tow Bar. First step is to go ahead and install our quick disconnects onto the car side. These parts will bolt onto the base plate that's already been installed. Now these are labeled, driver's side of the car, and then our accompanying hardware. We've got this plate, which will go over the top with a bolt, one on each side.

This will go on to your base plate, which will get a flat washer, a lock washer, and a nut. Same on both sides. Then, we'll do the same thing on the passenger side. Now we'll just leave these finger tight for now. Just enough where everything holds its shape. Now again, leaving it finger tight, we'll go ahead and put our crossbar into place.

Just go ahead and line up with the pins on top and on the bottom. We'll move it around as needed till it fits together. Try to get it even as you can on both sides. Then we'll go ahead and hand tighten our hardware back here. Let's go ahead and do a quick test run with our crossbar, make sure we can remove it.

Let's go ahead and tighten down our remaining 2 bolts. Let's do one more check. Then we'll go ahead and torque these bolts down as specified in the instructions. Now these parts will stay attached to our base plate. In this application, we take our base plate, it comes with it. Now we'll go ahead and put our crossbar into place.

Then we'll put our locking pins on top. We'll go ahead and put our locking pins into place, matching the picture. If it snaps tight, that's what you want. Let's go ahead work with our tow bar now. We'll go ahead and slide it into the hitch. Line up the hitch pin holes and install the hitch pin that comes with it. Now to release it, we'll go ahead and push it back a little bit, and pull back on this latch and that releases it. When we need to store it, just like that. Also, we can tilt it from one side or the other for storage when you leave it on the RV. Let's go ahead and extend our tow bar to our car. We'll go ahead and rotate it back up, unlatch it, pull it down. We'll go ahead and tilt it to one side and pull out the arms, and this will go into our crossbar. Now we'll go ahead and put our pin into place for this junction or joint. We line up the hole in the pin with this hole in the plate right here. We'll take our safety pin, just like the ones on top. Make sure it snaps into place. We'll do this on both sides. OK now this is all the parts that come with the Falcon All-Terrain tow bar. Now we still need to add some safety cables. We're going to use part number RM-645, the Single Hook Safety Cables, also from Roadmaster. Here's one of our safety cables, there's 2 that come with the kit. You can see it's just one hook. This end will thread through the space provided for on our tow bar. We'll use one of these quick links that comes with the kit, and we'll attach this to our base plate. When you're done towing for the day, you can store the tow bar with these cables on the inside as well. One side is done, let's do the other side. Now when we connect our safety cables to our hitch, we want to cross them just like this. Just go ahead and hook them up. All right, now see how the clamp can't work on the hitch here We're going to have to use an extra part. To do that, we're going to use some extra quick links from Roadmaster, part number RM-910022. Now these are rated at 6,000 pounds, just like the cables are. All that's left over is to hook up our break-away cable, and also our electrical cable, which will vary from installation to installation. To release it we just pull up on this lever then we can easily release the arm. Let's go ahead and make the rest of our hook-ups, and take it for a test drive. With that, that'll finish it for the Roadmaster Falcon All-Terrain Tow Bar, part number RM-522 from Roadmaster on our 2013 Honda CR-V. .


Customer Reviews

Roadmaster Replacement Cable Connectors - RM-910022

Average Customer Rating:  4.7 out of 5 stars   (45 Customer Reviews)


- RM-910022
by:

The replacement links came pretty quick and worked well to attach my safety chains to my trailer.



- RM-910022
by:

Was getting ready to go on another adventure when I realized part of the safety cables used to tow my car were missing. Everyone I contacted wanted to sell me a complete kit. I only needed 2 cable connecters & 2 10" cables. You had exactly what I needed. You didn't try to sell me everything under the sun, & it arrived when promised. I will be getting my parts from you from now on, & all my RV friends will know about your company. A big THANK YOU!!


Comments
Great! The cables look as good now as they did when I took them out of the package. Money well spent.
Wes H - 07/29/2016



- RM-910022
by:

Great products, fast shipping!



- RM-910022
by:

Perfect to extend my trailer chains to truck



- RM-910022
by:

Bought these for our trailer hitch chains... they are bigger than they look in the picture, but work very well. These are made to last and very strong.



- RM-910022
by:

These cable connectors work well. The threaded part is easily turned by hand with no tools required. I use them to permanently connect the safety cables to my motorhome for towing my Jeep. Of course, I can easily remove the cables with these if needed.



- RM-910022
by:

As described



- RM-910022
by:

The product ordered was received as expected to replaced worn links used for many years. I have ordered products many times of the years from etrailer and never been disappointed with product or service. A rare find in today's world.



- RM-910022
by:

This company is great. I placed my order for a replacement base bar for towbar and some cable connectors on Wednesday at 11:00 a.m. I received an email from them by 12:35 p.m. that it was shipped and the order was sitting on my front porch the next afternoon when I arrived home. Thank you for your super fast service. I have ordered from this company in the past and will again in the future.



- RM-910022
by:

Very Sturdy.Use on both RV and toad



- RM-910022
by:

Great Service and shipping even with the covid days.



- RM-910022
by:

I'm ordering a pair for each of my trucks. Quick shipping and a great product



- RM-910022
by:

Just what I was looking for.


Comments
It allowed me to adapt our motorhome tow hitch to our Cherokee base unit.
Dennis U - 07/30/2020


- RM-910022
by:

etrailer has excellent product and service one of the best places to get all your Recreational Vehicles parts and supplies.



- RM-910022
by:

ez to install on safety cables



- RM-910022
by:

great experience, no problems , delivery was as advertised, good quality products, fourth oder from trailer, never one problem on any of my orders.



- RM-910022
by:

Just what was needed to clip chains to truck easier. With 6 K weight rating this gives added strength when towing.


Comments
Excellent, makes putting chains on and off easy to reach.
Michael P - 09/22/2018



- RM-910022
by:

Vital accessory



- RM-910022
by:

Very secure



- RM-910022
by:

Product arrived on time and exactly what was ordered!


Comments
exactly as expected, highly recommend
Roy M - 12/01/2018



- RM-910022
by:

Easier connection



- RM-910022
by:

Great products. Everything fits and wor ks.



- RM-910022
by:

Outstanding



- RM-910022
by:

Exactly what I was looking for. Was surprise how fast I got them and for the best total price compared to other suppliers.



- RM-910022
by:

They do what they say they will do. Good product.


25
45
Show More Reviews

Ask the Experts about this Roadmaster Accessories and Parts

  • Weight Load Range for Roadmaster Cable Connector Set # RM-910022
    I contacted the manufacturer to find out the load range for this product, part # RM-910022. It is specified for a 2000 pound snap rating. Please note that cable connectors of this type are designed and rated specifically for a horizontal line pull application (but not for hoisting or lifting). The capacities quoted by manufacturers are for this type of application only. I suggest you consider Hidden Hitch part # 49135, which also comes as a set of two. These half-inch Quick Links...
    view full answer...
  • What Is The Length And Weight Capacity On The Roadmaster Cable Connectors, # RM-910022
    The length on the Roadmaster Replacement Cable Connectors, # RM-910022, is 3-3/16 inches and the width is 1-1/2 inches. The thickness of the connector is 3/8 inch. The maximum capacity on the connector is 6,000 lbs. They are packaged in a quantity of two.
    view full answer...
  • Quick Link Availability that has 10k Capacity for Use with Safety Chains
    The part # RM-910022 is rated for 6,000 lbs so would not be a good choice for your setup that tows a 7,500 lb trailer but the part # 49135 has a 10k capacity and would be way to go.
    view full answer...
  • How Thick are Roadmaster Replacement Cable Connectors RM-910022
    I checked with my contact at Roadmaster, and Replacement Cable Connectors # RM-910022 are 3/8 of an inch thick.
    view full answer...
  • Do Safety Cables and Cable Connectors Have to Have Same Capacity for Flat Tow Setup
    You'd need the safety cables, caribiner/quick connects and anything else to be rated for at least the weight of the towed vehicle. So while the cables part # C80176 are rated for 7,500 you could use the # RM-910022 which is rated for 6k assuming your vehicle weighs less than that. I am fairly certain you have a 2020 Hyundai Santa Fe which would at most weigh 4k.
    view full answer...
  • Parts to Flat Tow 2021 Jeep Wrangler
    The base plate kit can vary depending on the Jeep front bumper type. I am quoting parts based on the factory plastic bumper. If you have a factory steel bumper, Off road bumper with 3/4" D-rings or Off road bumper with 1" D-rings, just let me know so I can adjust the recommendation if necessary. For the base plate kit I would recommend the etrailer # e98948 Invisible Base Plate Kit with removable arms. I have attached a installation video for a 2020 Wrangler Unlimited to give you an...
    view full answer...
  • Recommended Flat Tow Equipment for 2021 Jeep Grand Cherokee
    It sounds like you already have some of the parts needed to flat tow your 2021 Jeep Grand Cherokee. I am just going to list out everything needed and you can leave off what you already have. First you need a Base Plate kit unique to your Jeep. I recommend the Roadmaster # RM-521440-5 Direct-Connect kit with removable arms. You mentioned you wanted direct-connect, and this is the bar I would have recommended either way. The direct-connect system hooks up faster. Next you will need...
    view full answer...
  • Parts Needed To Flat Tow 2020 Buick Envision Behind Motorcoach
    To flat tow your 2020 Buick Envision behind your Tiffin motor coach you will a few parts starting with a vehicle specific base plate kit. For your Envision I would choose the Roadmaster # RM-523196-5 Direct-Connect Base Plate Kit which features simple twist and lock attachment, and it hidden very well when not being towed. Next add a tow bar. An excellent choice here is the Roadmaster # RM-522 All Terrain Non-Binding tow bar. A non-binding tow bar will let you easily disconnect your...
    view full answer...
  • Parts Needed to Flat Tow 2020 Equinox Premier Ed. With LED Taillights and Active Aero Shutters
    I would use the Roadmaster # RM-523193-5 Base Plate Kit for Direct-Connect. From looking at the attached instructions (Figure T) the only trimming is to a small area on the left and right of an air dam, behind the grill. You can see the shutters at the top of that figure and they do not appear to be affected. I have also attached a video demonstration of the installation. This base plate will pair perfectly with the Roadmaster # RM-520 “Falcon 2” standard tow bar rated for 6000 pounds....
    view full answer...
  • Parts Needed to Flat Tow 2008 Honda CR-V Using Demco # 9511007 "Aluminator Tow Bar
    To flat tow your 2008 Honda CR-V AWD you will need a base plate kit for your CR-V. I recommend the Demco # DM9519207 tabless kit. This will include the parts needed to couple with your Demco # 9511007 "Aluminator" Tow Bar that you already have. Next you will need a tow bar wiring kit. I recommend the Roadmaster # RM-152-98146-7 Universal wiring kit which includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback...
    view full answer...
  • Universal Wiring Kit For 2012 Subaru Outback Plus Other Recommendations
    Yes, we have the Roadmaster # RM-155 Tail Light Wiring Kit with bulbs. I reached out to my contact at Roadmaster and he confirmed that this would work with your 2012 Outback to provide rear vehicle lights. I have included a link showing the installation on a Chevy Spark. Normally, when flat towing a 2012 Subaru Outback behind an RV, I would recommend a tow bar Universal Wiring Kit like the Roadmaster # RM-152-98146-7. This complete kit includes everything you need to connect your RV's...
    view full answer...
  • Available Trailer Safety Chain Extensions
    We offer an 8-inch cable extension kit, Roadmaster # RM-910648-8, rated for 8000-lbs and this includes two quick-links. Additional quick-links are offered too, part # RM-910022, and also Snap Hooks # RM-910031, to give you connection flexibility. All safety chains and cable items are shown on the linked page. Be sure to select ones rated for your trailer weight.
    view full answer...
  • Can the Safety Cables on a Roadmaster Sterling Tow Bar be Used with MX Base Plates, 2011 Ford Escape
    According to Roadmaster on the MX style base plates, like # 4414-3, the safety chain anchor brackets for Sterling cables will not fit. To use these base plates with the Sterling tow bar, # RM-576, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket. You may need to use some extensions, like # RM-650648-10, and connectors, like # RM-910022, in order to attach them to the vehicle frame. If you choose to have them welded,...
    view full answer...
  • Quick Link Recommendations for a Roadmaster Base Plate Kit Short Safety Cables
    The base plate kit part # 161-1 that you referenced does only include 2 of the short safety cables and two of the quick links. The other two you saw most likely came with a set of long safety cables that are sold separately. To order additional ones you would want part # RM-910022 that is sold individually.
    view full answer...
  • Weight Rating of Quick Links Included with Roadmaster Safety Cable Extensions RM-910648-12
    The Roadmaster Safety Cable Extensions # RM-910648-12 do include Quick Link connectors. The connectors alone are part # RM-910022 and these are rated for 6000-lbs. Other Quick Links like Curt # C82931 are rated lower, in this case 2640-lbs.
    view full answer...
  • Parts Needed To Flat Tow 1987 Jeep Wrangler YJ
    Yes, we have all the parts needed to safely and legally flat tow your 1987 Jeep Wrangler YJ with manual transmission. First you need a base plate kit for your Jeep with a standard factory bumper (If you have the Off-Road Bumper with 1” D-Ringer Bumper Mounts, or Off-Road Bumper with 3/4” D-Ring Bumper Mounts, or Rugged Ridge XHD Bumper, just email me back for a updated recommendation.) The Roadmaster 1409-1 Crossbar-Style would be a good choice, but keep in mind this technical note:...
    view full answer...
  • Recommendation for Vinyl Coated Safety Cables with Clevis Hooks
    To get the cables long enough, you will need to go up a size larger than 50 inches, since a 50 inch version is not available. The next closest size would be 64 inches. I recommend the Roadmaster Single Hook, Straight Safety Cables, # RM-645. These cables have vinyl-coated steel construction and have the hook you are looking for at the end. The capacity for these cables is 10,000 pounds. Another option would be to use the Dutton-Lainson cables, # DL20119, and a 10 inch extension, #...
    view full answer...
  • Flat Towing A 2016 Jeep Liberty Where Motor Coach Only Has 4-Pole Lighting Connector
    First you will need the Roadmaster # RM-521423-5 Direct Connect Base Plate Kit so you can hitch to your Jeep. The hooks and brackets for tow hooks will have to be removed. Add to that a tow bar. I would recommend the Roadmaster # RM-522 All Terrain – Non Binding tow bar. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle. The tow bar is the one point in flat towing that gets the most stress...
    view full answer...
  • Parts Needed To Flat Tow 2018 Jeep JK Wrangler 2-Door With Plastic Skid Plates
    Yes, I can give you the parts list you will need to flat tow your 2018 Jeep JK Wrangler with 2 doors and a plastic skid plate. I assume you have the standard 2” square hitch receiver on your coach with the standard RV-Style 7-pin electrical connection. First you will need the Roadmaster # RM-521448-5 Direct-Connect Base Plate Kit designed to work with a factory standard bumper with no winches or guards. Next you will want a Roadmaster # RM-522 Falcon All Terrain and Non-Binding...
    view full answer...
  • Parts to Flat Tow 2015 Edge Sport With 2.7L engine and NO Adaptive Cruise Control
    To flat tow your 2015 Edge Sport with 2.7L engine and NO adaptive cruise control you will need the Roadmaster # RM-524444-5 Direct-Connect Base Plate Kit which is well hidden and has simple twist and push/pull installation of connection arms. If you have adaptive cruise control email me back and we will see if there is another alternative. Next you need a tow bar. I recommend the Roadmaster # RM-522 Falcon All Terrain Non-Binding tow bar. A non-binding tow bar will let you easily disconnect...
    view full answer...
  • Parts Needed to Flat Tow 2016 Fusion Titanium Hybrid Without Adaptive Cruise Control
    Yes, we have all the parts and information you will need to safely and legally flat town your 2016 Ford Fusion Hybrid First you will need a vehicle specific base plate kit. For your Fusion Hybrid WITHOUT adaptive cruise control you can use the Roadmaster # RM-524434-5 kit. It is designed for use with motor-home-mounted tow bars, the direct-connect brackets are virtually invisible, easy to mount and remove, and they eliminate the need for a quick-disconnect crossbar on your tow bar....
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Sarah L
Expert Research:
Sarah L
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Sue W
Video Edited:
Sue W
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.