See what our Experts say about this Yakima Roof Rack

• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Recommended Roof Rack for Using Two Hullavators on a 2024 Ford Bronco Hard Top
  Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item # TH898 on a 2024 Bronco. To mount and use two Hullavator item # TH898 on a 2024 Ford Bronco 4 door hard top with factory raised roof rails you will need the following parts: TimberLine Towers for Yakima Crossbars item # Y33TR 70" Long - Yakima JetStream Crossbars - Aluminum - Black item # Y00427 The 70" bars are the next size up...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• What Does The Yakima TimberLine Roof Rack for Raised Rails Y39YD Come With?
  Hello Alexander, thanks for reaching out. The Yakima TimberLine Roof Rack for Raised Rails part # Y39YD is a full roof rack system, and this is the correct fit for the 2025 Kia Sorento. It comes with four TimberLine Towers and two 50" JetStream crossbars. If you want to do a larger crossbar, it is possible, we just wouldn't offer it as a kit. The next size up for the Yakima Aero bars is a 60". So all you would need is the four pack of TimberLine Towers part # Y33TR, and a set of 60" crossbars...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• Roof Rack for 2004 Toyota 4Runner to Carry Yakima Showdown Kayak Carrier
  The Yakima Jetstream roof rack part numbers # Y00426 and # Y00147 that fits your 2004 Toyota 4Runner would do a great job carrying the Yakima Showdown part # Y04081. The Jetstream is very aerodynamic which helps with wind noise, is easy to install, and is one of the highest quality roof racks out there so you'll be very happy with it.
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• How To Carry Skis and Snowboards on a 2017 Lexus NX 200t With Flush Side Rails
  So long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis. For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories. For a roof rack mounted ski carrier, I recommend the Yakima FatCat...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Are the Yakima JetStream Crossbars on a 2019 Subaru Ascent Compatible w/ Yakima & Thule Attatchments
  The TimberLine Towers # Y33TR and Yakima JetStream Crossbars # Y00426 are confirmed to fit your 2019 Subaru Ascent and are going to be a great option to use both your Thule Portage Canoe attachment and Yakima Keel Over Canoe attachment. You will be able to use the Thule Portage and the Yakima Keel Over with the JetStream crossbars without issue. You can also add the Yakima Same Key System (SKS) Lock Cores # Y07204. This will allow you to lock your roof rack to your roof.
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• What Yakima Pads and Clamps do I Need for My 2019 Ford F-250 to Use My Baseline Feet?
  Hello Michael, I am glad you wrote in, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y27FR that you were looking at is for a Ford F-150. For your 2019 Ford F-250 (vehicle that was put into the fit guide) you will want to order (2) sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06185. How did end up with the feet and no pads, did you take them off of an old vehicle? What do you plan on using your roof rack for?
  view full answer...
• Fitment of the Thule Pulse M # TH614 with Yakima JetStream Crossbars on a 2002 Audi A4 Sedan
  Yes! If you have Yakima JetStream Crossbars installed on your 2002 Audi A4 Sedan with a bare roof, the Thule Pulse M # TH614 can clamp onto the crossbars with no problems. This is because the height and width of the JetStream crossbars are the exact same as the Thule WingBar Evo Crossbars. If you need a complete roof rack, you need the following components: - Yakima JetStream Crossbars - Black - 50" Long # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - 2 sets...
  view full answer...
• Solution for Using Yakima RoundBar Crossbars With Q-Towers on 2024 Silverado
  Hi John; Yakima moved away from using the Q-Towers back in 2016. This means there are no Q-Clips that will fit your 2024 Silverado. Assuming you have a 1500/2500/3500 with the Crew Cab or Double Cab you will need the BaseLine Towers for Yakima Crossbars # Y28TR. You will also need the BaseClip Fit kit. For the 1500 that will be two of the # Y06110 and for the 2500/3500 the # Y27FR and # Y06124. The last thing you will need is the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Silverado 2500 Crew Cab
  To add a roof rack to your 2024 Chevrolet Silverado 2500 Crew Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 I have attached a couple of pictures below that will give you an idea of what this system will...
  view full answer...
  
• Which Yakima BaseClips Fit 2021 Ford F-150
  I checked with Yakima and for the 2021 Ford F-150 the correct Baseclips are the 197 clips part number # Y27FR.
  view full answer...
• How to Add Crossbars to a 2024 GMC Sierra 3500
  To add a roof rack to your 2024 GMC Sierra 3500 Crew Cab or Double Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
  view full answer...
• Can Old Yakima Round Crossbars And Q Towers Be Used With New System On 2024 GMC Sierra 2500HD?
  Hey there Bill, I got good news and some bad news. The good news is that we can piece together a kit and you can re-use your old Yakima crossbars since they are the same diameter as the new ones. The bad news is that you are correct in saying the Q towers won't work with your new vehicle so you'll need the new ones. The complete kit for your 2024 GMC Sierra 2500HD with naked roof is as follows, and remember you already have the crossbars so you technically do not need to buy more: -Yakima...
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Silverado 2500
  To add a set of crossbars to the roof of your 2024 Chevy Silverado 2500, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. It fits both the crew cab and double...
  view full answer...
• Yakima Towers & Fit Kit For 2023 Ford F-150 SuperCrew For Yakima Round Crossbars
  Hi there Dale; yes you can absolutely just get the towers and fit kit for your 2023 Ford F-150 SuperCrew from Yakima to utilize your round crossbars. All you need is the following: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y27FR - RoundBar SL Adapter # Y03536
  view full answer...
• What Are the Dimensions of the Yakima BaseLine Towers With the Crossbars and BaseClip
  Kason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8".
  view full answer...
• Roof Rack Recommendation for 2024 Chevy Silverado 3500HD to Carry Yakima Showdown
  Hey Ross so I would recommend going with a Yakima JetStream roof rack for your 2024 Chevy Silverado 3500HD that consists of part numbers # Y00426, # Y28TR, # Y27FR, # Y06124 as we have found the Jetstream racks are the nicest and easiest to use. And we also know the Yakima Showdown part # Y04081 was tested with this rack and works great as well.
  view full answer...
• How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel Towing
  Generally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
  view full answer...
• Will Crossbars Interfere With The Panoramic Sunroof Of A 2023 Ford F-150
  Yes, any roof rack, including the Yakima BaseLine FX Roof Rack for Naked Roofs # Y56UV, would most likely prevent you from being able to open your panoramic sunroof. Even if the crossbars clear the glass there's always the chance that whatever weight you out on top of them could cause them to dip down enough and touch so roof rack manufacturers don't ever approve of opening the sunroof while the crossbars are installed. If you'd still like to use these crossbars then you'll also need...
  view full answer...
• Roof Rack Recommendation with Longer Crossbars for 2020 Chevy Silverado 3500 Long Bed
  Yakima has roof racks that do fit your 2020 Chevy Silverado 3500 Crew Cab like the HD bar rack part numbers # Y01157, # Y28TR, # Y03541, # Y27FR, and # Y06124 which gives you a 60 inch bar setup with plenty of weight capacity. This would be best way to carry the accessories you have now as the ladder racks have wider bars than what standard roof rack accessories can fit. Then for a fold up tonneau cover the BAKFlip F1 part # BAK37FR would be a really great option as well that is confirmed...
  view full answer...
• BaseClip Fit Kit for a Yakima Roof Rack on a 2022 Ford F-150
  I would be happy to help you. To attach the BaseLine Towers for Yakima Crossbars item # Y00146 to your 2022 Ford F-150 naked roof you will need the following parts: HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y27FR The correct crossbars are item # Y01157.
  view full answer...
• Recommended Base Clips for 2020 Chevrolet Silverado Crew Cab 3500
  For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124. The clips won't scratch the paint either.
  view full answer...
• 70 Crossbar Recommendations to Use Thule Hullavator on a 2021 Ford F-150 Supercab
  Yes! In order to have the 70-inch crossbars to use with a Hullavator # TH898 on your 2021 Ford F-150 Supercab, I recommend the following parts: - Yakima JetStream Crossbars - 70" # Y00427 - Yakima BaseLine Towers # Y28TR - 2 sets of the BaseClip Fit Kit # Y27FR - Yakima Same-Key Locks # Y07204 Not only do you receive an extremely aerodynamic system on your roof with the JetStream crossbars, you also have the required 4 inches of length past the feet in order for the Thule Hullavator...
  view full answer...
• Recommended Roof Rack for a 2020 Chevrolet Silverado 3500
  The roof rack I recommend for a 2020 Chevrolet Silverado 3500 is the Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, part # Y06124, and part # Y27FR. This is an excellent option and will work well with the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 so long as you alternate their direction. The system is a custom fit so it will look nice on the roof of a new vehicle and it has aero crossbars for the best wind resistance.
  view full answer...
• Trailer Hitch or Roof Mount Cargo Carrier for a 2014 Kia Cadenza
  The Yakima EXO Swing Away Enclosed Cargo Carrier - 2" Hitches - 10 cu ft - 100 lbs # Y62VR is a great carrier, but it will not work for your 2014 Kia Cadenza. The only hitch available for your Kia is the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12118. This hitch will only work with accessories for 1-1/4" receivers. The Yakima EXO requires a 2" hitch. If you install the Curt hitch # C12118 on your Kia, you could use a cargo carrier like the 20x47 Reese Cargo Carrier...
  view full answer...
• Yakima Roof Rack Parts for a 2015 Kia Cadenza
  The Yakima parts needed to install a roof rack on your 2015 Kia Cadenza are the following: - 50" JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y27FR and # Y06126 - Lock Core Kit # Y07204 The "Y27FR" is our number for the BaseClip 197 you referenced.
  view full answer...
• Recommended Roof Rack Components To Mount A Yakima ReelDeal To A 2021 Ford F-150
  The Yakima ReelDeal Rooftop Fishing Rod Carrier # Y04089 is compatible with round bars so to get them attached to your Yakima Round Bars # Y00409 and onto the naked roof of your 2021 Ford F-150 you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y27FR
  view full answer...
• Solution for Using Yakima RoundBar Crossbars With Q-Towers on 2024 Silverado
  Hi John; Yakima moved away from using the Q-Towers back in 2016. This means there are no Q-Clips that will fit your 2024 Silverado. Assuming you have a 1500/2500/3500 with the Crew Cab or Double Cab you will need the BaseLine Towers for Yakima Crossbars # Y28TR. You will also need the BaseClip Fit kit. For the 1500 that will be two of the # Y06110 and for the 2500/3500 the # Y27FR and # Y06124. The last thing you will need is the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Silverado 2500 Crew Cab
  To add a roof rack to your 2024 Chevrolet Silverado 2500 Crew Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 I have attached a couple of pictures below that will give you an idea of what this system will...
  view full answer...
  
• How to Add Crossbars to a 2024 GMC Sierra 3500
  To add a roof rack to your 2024 GMC Sierra 3500 Crew Cab or Double Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
  view full answer...
• Roof Rack for 2017 Chevy Spark
  There is a roof rack option for your 2017 Chevy Spark but the SportRack # SR1002 is not a fit. Instead, I recommend an option from Yakima. This rack consists of the Yakima CoreBar Crossbars # Y00421, BaseLine Towers # Y28TR, and Fit Kit # Y06124; you can lock this roof rack with SKS Lock Cores # Y07204. This will give you an aero roof rack that helps reduce the amount of wind noise you might otherwise encounter.
  view full answer...
  
• Parts For Single Bar Roof Rack & Single Bar Ladder Rack on Retrax XR Tonneau on 2024 GMC Sierra 3500
  Okay, this is going to be quite a few parts but I'll go ahead and list out everything for a single bar roof rack and single bar ladder rack for your 2024 GMC Sierra 3500 and the RetraxPRO XR Hard Tonneau Cover # RTT-80485: Roof Rack Parts - Yakima BaseLine FX # Y83TR - BaseClip Fit Kit # Y06124 Ladder Rack Parts - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y47TR - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y67TR - Tonneau Cover Adapter Kit...
  view full answer...
• Can Old Yakima Round Crossbars And Q Towers Be Used With New System On 2024 GMC Sierra 2500HD?
  Hey there Bill, I got good news and some bad news. The good news is that we can piece together a kit and you can re-use your old Yakima crossbars since they are the same diameter as the new ones. The bad news is that you are correct in saying the Q towers won't work with your new vehicle so you'll need the new ones. The complete kit for your 2024 GMC Sierra 2500HD with naked roof is as follows, and remember you already have the crossbars so you technically do not need to buy more: -Yakima...
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Silverado 2500
  To add a set of crossbars to the roof of your 2024 Chevy Silverado 2500, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. It fits both the crew cab and double...
  view full answer...
• Are Yakima Same Key System Keys Unique
  The keys that come with the Yakima Same Key System (SKS) Lock Cores # Y07204 are not universal and will help prevent theft. On our site alone we have over 50 unique keys for replacement options so it isn't like there are 2-3 different possible keys someone could use to get the rack off. If you're planning to add the # Y00426 to your 2022 Ford Ranger you will also need the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06124. You will be able to add the SKS Lock Cores # Y07204 to...
  view full answer...
• What Are the Dimensions of the Yakima BaseLine Towers With the Crossbars and BaseClip
  Kason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8".
  view full answer...
• Roof Rack Recommendation for 2024 Chevy Silverado 3500HD to Carry Yakima Showdown
  Hey Ross so I would recommend going with a Yakima JetStream roof rack for your 2024 Chevy Silverado 3500HD that consists of part numbers # Y00426, # Y28TR, # Y27FR, # Y06124 as we have found the Jetstream racks are the nicest and easiest to use. And we also know the Yakima Showdown part # Y04081 was tested with this rack and works great as well.
  view full answer...
• Roof Rack For 2020 Ford Ranger to Install Yakima LockNLoad Platform
  We can get you set up with everything you need for your 2020 Ford Ranger so you can use the Yakima LockNLoad Platform Rack for Crossbars # Y05044-39. I checked with Yakima for you, and this the 55" long x 49" wide LockNLoad, which is the correct size for your truck. To mount it, all you will need is a Yakima roof rack, and you won't have to do any type of drilling as the LockNLoad will fit directly on the roof rack's crossbars. The correct roof rack for your 2020 Ranger is made up of the...
  view full answer...
• How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel Towing
  Generally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
  view full answer...
• Best Roof Rack and Four Fishing Rod Holder for a 2019 Ford Ranger
  The roof rack I recommend for a 2019 Ford Ranger is the Yakima JetStream Crossbar System which consists of part # Y00425, part # Y28TR, and part # Y06124. The Yakima JetStream Crossbar System is one of the best options on the market which has aero shaped crossbars which work to reduce wind noise/drag and rubber padded feet to protect the vehicle's finish. The fishing rod carrier I recommend for the 2019 Ford Ranger with Yakima JetStream Crossbar System is the Yakima ReelDeal Rooftop Fishing...
  view full answer...
• Roof Rack Recommendation with Longer Crossbars for 2020 Chevy Silverado 3500 Long Bed
  Yakima has roof racks that do fit your 2020 Chevy Silverado 3500 Crew Cab like the HD bar rack part numbers # Y01157, # Y28TR, # Y03541, # Y27FR, and # Y06124 which gives you a 60 inch bar setup with plenty of weight capacity. This would be best way to carry the accessories you have now as the ladder racks have wider bars than what standard roof rack accessories can fit. Then for a fold up tonneau cover the BAKFlip F1 part # BAK37FR would be a really great option as well that is confirmed...
  view full answer...
• Recommended Base Clips for 2020 Chevrolet Silverado Crew Cab 3500
  For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124. The clips won't scratch the paint either.
  view full answer...
• Roof Rack Recommendation for 2023 Ford Ranger with Naked Roof
  I attached a link to a page that has all of the roof racks that fit your 2023 Ford Ranger with a naked roof like the Yakima JetStream rack part # Y00428, # Y28TR, # Y06124. When we had the chance to test fit all of the roof racks we carry we all agreed that the Yakima Jetstream was the nicest so you'd be very happy with this option.
  view full answer...
• Recommended Roof Rack for a 2024 Volvo S90 w/ No Rails
  To add a roof rack to your 2024 Volvo S90, that does not overhang the side of your roof, you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y59UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• What is the Most Economical Roof Rack for My 2021 Ford Ranger with a Bare Roof?
  The most economical rack that doesn't require drilling for your 2021 Ford Ranger with a bare roof requires the following parts: - Round 48" CrossBars for Yakima Roof Rack System (QTY 2) # Y00408 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06124 - (Optional for extra security) Yakima Same-Key Lock...
  view full answer...
• RetraxONE XR Compatible Ladder Rack and Roof Rack Accessory Recommended for 2020 Ford Ranger
  The # RTT-60335 RetraxONE XR hard tonneau cover you'd looked at would be a great choice for your 2019 Ford Ranger. For a ladder rack, I'd recommend the Yakima OverHaul HD, part # Y01151-58. You'll also need the adapter mount, part # Y01155 which allows the ladder rack to mount to the rails incorporated into the RetraxONE XR tonneau cover. Yakima tells me that the 68 inch crossbars included with this ladder rack are what's recommended for the Ranger pickup, and would be compatible with the...
  view full answer...
• Parts Needed for Removing Lock Cores for Yakima Same Key System SKS Baseline Towers
  You're looking for the Replacement Control Key for Yakima Same Key System # Y8007835, which will allow you to move lock cores from your existing Yakima towers to your new Baseline towers. This disengages the splines on the lock cores to allow them to be removed from towers, bike racks or cargo boxes equipped with Yakima SKS locks. It looks like you've got a 2019 Ford Ranger so the complete Yakima roof rack kit for your vehicle that uses the Yakima 48" Roundbars # Y00408 you were looking...
  view full answer...
• Largest Rhino-Rack Pioneer Platform For Crossbars on 2020 Ford Ranger
  Yep, the largest Rhino-Rack Pioneer for crossbars that will fit your 2020 Ford Ranger is indeed the 58" x 47" option: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars # RR42115BF The Pioneer is a really nice system which allows you to carry a lot of gear in a number of different ways; to tie down that gear you can use the Ratchet Strap Kit # RR43175 and/or the Eye Bolt Kit # RR43178. If you also need a roof rack on your '20 Ranger for the Pioneer, go with the Yakima which consists...
  view full answer...
• Recommended Roof Rack for a 2020 Chevrolet Silverado 3500
  The roof rack I recommend for a 2020 Chevrolet Silverado 3500 is the Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, part # Y06124, and part # Y27FR. This is an excellent option and will work well with the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 so long as you alternate their direction. The system is a custom fit so it will look nice on the roof of a new vehicle and it has aero crossbars for the best wind resistance.
  view full answer...
• Which Yakima BaseClip is Front and Which is Back for the 2014 Chevy Impala
  The Yakima JetStream roof rack that fits your 2014 Chevy Impala includes the following parts: 50" Yakima JetStream Crossbars - # Y00428 BaseLine Towers - # Y28TR Front BaseClip - # Y06124 Rear BaseClip - # Y06126 Lock Cores - # Y07204 (optional) I listed which clip should be in which position above but if I hadn't told you this, you can find these fitments in the instructions or on the Yakima website. Attached are some videos for you to check out!
  view full answer...
• Parts Needed to Install Yakima Roundbar Roof Rack 2021 Ford Ranger
  To install a Yakima round bar roof rack on your 2021 Ford Ranger Supercrew with a naked roof you'd need the part numbers # Y28TR, # Y03536, # Y06124 since you already have the crossbars. Normally you'd additionally need the part # Y00408.
  view full answer...