See what our Experts say about this Erickson Ratchet Straps

• Can a Trailer hitch Mount Cargo Carrier be Used at the Back of a 5th Wheel Trailer for Generator
  I do have a solution for you but our contacts over at Pro Series have recently told us that the cargo carriers they manufacture, including # 63153, are not rated for use behind a 5th wheel trailer. Curt has carriers that can be used on the back of a RV like the # C18152. There is much more movement at the back of your 5th wheel trailer than on a vehicle so you will want to make the carrier as stable as possible using the built-in anti-rattle device. I also strongly recommend using straps...
  view full answer...
• Recommended Travel Trailer Hitch Receiver and Cargo Carrier for Gas Generator
  On your Dutchmen Coleman Lantern 17rd travel trailer, I recommend the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 which has a weight capacity of 350 lbs maximum tongue weight. Then for a 4,000 watt running generator like the Q-iPower # 289-AP5000 which weighs 117 lbs and has dimensions of 23-1/4" long x 17" wide x 18-1/2" tall, you will want a cargo carrier like the TorkLift Lock and Load # TLA7752. This will not only help carry the generator but also deter theft. If you want...
  view full answer...
• Are Thule Easyline Trailer Kits Available?
  We offer a few utility trailer kit options, but the Thule Easyline trailer kits were discontinued about about 10 years ago. If you are in the market for a lightweight trailer kit, I recommend looking at either the Detail K2 Mighty Utility Trailer, # K2MMT5X7, which is very similar to the older Thule Easyline trailers or the Detail K2 Multi Utility Trailer, # K2MMT4X6, which has lower sidewalls, but it includes a taller tailgate that can act as a ramp for 4 wheelers and ATVs. I've attached...
  view full answer...
• E-Track Recommendations For 7 By 14 Enclosed Trailer To Carry Classic Motorcycles
  With cargo like your two classic Harleys you will want to make sure they are really well secured to prevent any damage. I recommend securing the E-Tracks to something more stable than just wood. If you are attaching the tracks to the floor I recommend you make sure they are secured either to the metal structure of the trailer or use metal plates like the E-Track Backing Plate, part # e96RR, to make it as secure as possible. If the interior floor and walls are 7 ft long I recommend 5...
  view full answer...
  
• Bicycle Trailer for Use with Recumbent Bikes
  We have what you need to transport your two recumbent bikes, the ICE VTX trike and the Bacchetta Corsa 2-wheel recumbent bike. The Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7 has a bed that measures 88 x 52 inches and it can be used with its front and rear tailgates down if needed. Since the longest VTX is 90-1/4-inches this should do the trick. When you're not biking you can use the trailer's 1640-lb payload capacity for chores around the yard. Tie down points are provided...
  view full answer...
• Keeping Cargo from Moving and Shifting in Enclosed Trailer
  Adding trailer suspension enhancement such as # TTRA1702 can definitely help with ride quality but I think the best solution to keep loads on the pallet is some cargo control devices. You could start with a cargo net, I have included a link to the various sizes we carry. A cargo net is a simple solution to secure a large group of items with one device. You can also get some E-Track, # E19148, and attach them to the sides of the trailer. Then use some D-Ring tie downs, # E59143, and ratchet...
  view full answer...
• Recommendation for Transporting 2 Kayaks on Rockwood Premier Pop-Up Camper
  Thank you for providing a photo of your truck and Rockwood pop-up camper, on which you want to transport your two kayaks. The type of kayak carrier I recommend for your application is the foam block variety. This style is both among the lowest-cost available and is also very light in weight. Low weight is an important consideration since the top of your Rockwood pop-up may have a limited weight carrying capacity. You'll want to check your owner's manual or with your local Rockwood dealer...
  view full answer...
  
• Carrier Recommendation for Transporting Razor Metro EcoSmart Scooter
  For transporting a scooter you would want a scooter/dirt bike carrier like part # UF48-979033 which is designed for the weight of a scooter. You would need tie downs like part # EM31352 as well for securing the scooter to the carrier.
  view full answer...
• Reese Eclipse 4 Bike Rack # 63124 Moves Side to Side Several Inches While Driving
  Thank you for your recent purchases from etrailer! The Reese Eclipse 4 Bike Rack # 63124 that you selected is a good entry-level 4-bike carrier that fits the 2-inch hitch on your 2014 GMC Acadia. This rack does include an anti-rattle hitch bolt to reduce the movement of rack in hitch receiver but some motion of the loaded rack while you drive is inevitable. There are a few things you can try. Try loading first the heaviest of the 4 bikes. This will help reduce the tendency for the rack...
  view full answer...
• Recommended Ratcheting Tie Down Straps for Curt # 18152 Cargo Carrier
  The Erickson # EM34415 might be a little bit of overkill, but the ratcheting mechanisms work very nicely. I especially like the quick release button that works very well. I've always felt that when you are securing your cargo for transport, there is absolutely nothing wrong with a bit of overkill. Each strap has a 400 lb working load limit. If you wanted a less expensive option, try the Erickson # EM31352. This kit includes four 1x10 ratchet straps, and each strap has a 500 lb working...
  view full answer...
• How to Carry 2 Vespa 300 Scooters with a 32ft Class C Motor Home
  Your best option for carrying your Vespa 300 scooters with your Class C motor home is to pull a small trailer. We do not have any hitch mounted motorcycle carriers that will allow you to carry both scooters at the same time. We have everything you need to equip a simple cargo trailer for carrying both scooters. A few parts you will want to look into are wheel chocks like part # TWSPWC3BT (1 per scooter), tie down rings like part # RR05, and tie down straps, like # EM31352.
  view full answer...
• Roof Rack Solution for Transporting Long Lumber on 2009 Honda Ridgeline
  The Rhino-Rack roof rack that you referenced, the Vortex Aero system for naked roofs consisting of parts # RRVA150S-2, # RRRLKVA and # DK155, is an excellent (and quiet) roof rack system for your 2009 Honda Ridgeline. All the racks for your truck will have a crossbar spread of 29-1/2-inches centered on your roof and all can be seen on the link provided. For transporting lumber loads as long as 16-feet I suggest you use a roof rack combined with a hitch-mounted load support such as the...
  view full answer...
• Hitch and Recumbent Bike Rack Recommendation for 2003 Chrysler Town and Country
  So first let's start with a trailer hitch for your 2003 Chrysler Town and Country. For that you'd want a Class III hitch with a 2 inch opening so that you'd have the capacity for the heavier duty recumbent bike racks. So the Draw Tite # 75119 would be the best option. To determine the wheelbase, measure the distance between the axles. You will also need to determine the weight of each bike. Then you can decide if one of our bike racks that are designed for recumbent bikes will work for...
  view full answer...
• Best Way to Transport 2 Paddleboards on 2014 Jeep Wrangler Sport Hardtop
  Your Jeep Wrangler with its hard top gives you two options for paddleboard transport. One is VERY low in cost and simple to use. Roof racks are available for your hardtop and these would allow use of a paddleboard carrier but not the discontinued Thule SUP Taxi Paddleboard Carrier that you referenced (this carrier requires a minimum crossbar spread of 24-inches and the racks only provide 18-inches of spread). The link provided shows these roof racks, which include the most cost-effective...
  view full answer...
• Recommended Ball Mount and Wiring For 2014 Mazda CX-5 to Tow Golf Cart on Trailer
  Your 2014 Mazda CX-5 has a towing capacity of 2000 lbs which restrict a trailer hitch like # C12170 to that capacity. For your Club Cart Golf Cart, from what measurements and weights I can find online, the Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs # K2MMT5X7 is a great option for you. You will need ramps if you use this trailer like the # 288-07489. This will be a tight fit, but that will help to secure it. You will also need tie downs like the Erickson...
  view full answer...
• Tie-Down Straps to Secure Spare Tire on Shelf in Trailer
  I'm not sure how long the straps can be for your application exactly but the Bulldog Winch Cam Buckle Straps # BDW20303 measure about 28 inches at their shortest. If the length is short enough to tighten then these will work well because they're tough straps. If they aren't going to work ratchet straps like the Erikson # EM31352 will work just fine for you as well
  view full answer...
• How to Secure a Vespa Scooter with 12 Inch Wheels and Tires in an Enclosed Cargo Carrier
  The MaxxTow wheel chock should only be used with 14 to 21 inch wheels. A 12 inch wheel on a scooter could be a problem because the brakes and other suspension components will also be lower compared to a 15 inch or larger wheel and that interference would cause the scooter to not fit. I checked our similar wheel chocks and I am not confident that any of them would be suitable for a 12 inch wheel but I do have a possible solution for you. To secure the scooter I recommend mounting some...
  view full answer...
• Trailer Hitch Mount Bike Rack for Recumbent Bikes on a 2012 Hyundai Elantra
  The Swagman XC Extended rack # S64650-EXT is good for bikes with wheelbases up to 68 inches maximum. It looks like the Tour Easy bikes top out at a 69 inch wheelbase. We don't have a bike rack with a wheelbase maximum that will fit your 69 inches, but instead you could use a small utility trailer like the Detail K2 # K2MMT4X6, This trailer is 72 inches long and 48" long so you would be able to carry both of your bikes with ease. You would also need some straps like the Erickson Ratchet...
  view full answer...
• Ramped Wheelchair Carrier for Use on 2001 Oldsmobile Intrigue
  Your 2001 Oldsmobile Intrigue can be equipped with 1-1/4-inch hitch of either a Class I or a Class II rating. In order to use a wheelchair carrier your hitch will have to be a Class II type. A Class I hitch will not likely have the capacity to handle the weight of the chair and the carrier. The weight of both together must remain within the hitch's and the car's tongue weight (TW) limit. There will be a sticker on your hitch to indicate its class rating and tongue weight capacity. The...
  view full answer...
• Recommended Wheelchair Carrier for Class I Hitch on 2003 Honda Civic
  I do have some possible solutions for you, however we do not currently offer any carriers that can work with a heavy wheelchair on a Class I hitch like the one you have on your 2003 Honda Civic. Class I hitches are not rated to handle the weight of a heavier wheelchair and wheelchair carrier behind the vehicle. If the wheelchair you plan on carrying is a standard lightweight folding wheelchair, you can use a cargo carrier with your trailer hitch. The lightest carrier that is compatible...
  view full answer...
• Can a Trailer Hitch Mounted Cargo Carrier be Used on the Back of a 5th Wheel Trailer
  A trailer hitch mounted cargo carrier can be used on the back of a 5th wheel trailer. But you must keep in mind that there is significantly more bouncing at the back of the trailer. Because of this I recommend some extra precautions to secure the carrier and cargo. First, I recommend the use of an anti-rattle device such as the Roadmaster Quiet Hitch, # RM-061. This device will hold the carrier shank tight against the inside of the receiver to eliminate movement. I have included a link...
  view full answer...
• Will the Extang CargoCleats Truck Bed Tie-Down Anchors # EX1932 Fit on a 2006 Dodge Dakota
  Yes, the Extang CargoCleats Truck Bed Tie-Down Anchors, # EX1932, will fit on your 2006 Dodge Dakota. These clamps were designed to fit most trucks that have a lip at the top of the truck bed side wall, which your Dakota should have. I have attached a demonstration video that shows how to install these clamps for you to check out. If you would like a set of straps to go with the clamps, I recommend the Erickson Ratcheting Tie-Down Straps, # EM31352.
  view full answer...
• Will the Pro Series Cargo Carrier # 63155 Fit on a 2013 Subaru Crosstrek With Factory 1-1/4 Hitch
  You will have no problem inserting the shank of the Pro Series Cargo Carrier, # 63155, into the 1-1/4 inch receiver on your new 2013 Subaru Crosstrek. The important factor to consider when using this cargo carrier on your vehicle is cargo carrier to bumper clearance. To find this clearance, we need to take one simple measurement. You will want to measure from the center of the hitch pin hole on your trailer hitch receiver to the furthest back point on your bumper (see photo). If that...
  view full answer...
  
• Cargo Carrier And Hitch For 2011 Chrysler 300 To Carry Folding Wheelchair
  If you do not have a hitch on your 2011 Chrysler 300, I recommend a hitch and a cargo carrier. After doing some research on your vehicle I found that the towing weight capacity is 1,000 lbs. that means the maximum tongue weight capacity or total weight a hitch could handle is approximately 100 lbs. I recommend the Draw-Tite Trailer Hitch, part # 36548. This is a Class ll hitch and has a 1-1/4 inch receiver opening. I also recommend a flat hitch-mounted cargo carrier like the Rola Packer...
  view full answer...

Do you have a question about this Ratchet Strap?