E-Track Recommendations For 7 By 14 Enclosed Trailer To Carry Classic Motorcycles

Updated 02/06/2014 | Published 02/04/2014

Products Featured in This Question

Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1

(1206)

$43.37

Erickson E Track Tie Down Ring - 1,333 lbs

(910)

$8.15

Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs

(910)

$9.01

etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2

(250)

$17.93

Erickson Chrome-Protector Sleeves for Tie-Down Straps - 12" Long - Qty 2

(24)

$21.03

Erickson Ratchet Tie-Down Straps w/ Web Clamps and S-Hooks - 1" x 10' - 500 lbs - Qty 4

(89)

$26.55

Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 2" x 10' - 1,100 lbs - Qty 2

(1202)

$45.94

Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1

(1206)

$22.34

Question:

I just ordered a new 7x14 enclosed trailer. I plan on hauling two utra classic harleys. I assume one track down the middle. How far to center for the two going down the side ?

asked by: Dennis W

Expert Reply:

With cargo like your two classic Harleys you will want to make sure they are really well secured to prevent any damage. I recommend securing the E-Tracks to something more stable than just wood. If you are attaching the tracks to the floor I recommend you make sure they are secured either to the metal structure of the trailer or use metal plates like the E-Track Backing Plate, part # e96RR, to make it as secure as possible.

If the interior floor and walls are 7 ft long I recommend 5 ft E-Tracks like part # E19148, along with the 2 ft E-Track, part # EM59150. I would place them as close to the wall on the floor as possible, and also install tracks along the wall of the trailer at a height that would allow you to secure your motorcycles. I have attached a photo that gives you the dimension of the E-Track and also shows the distance between each of the mounting holes.

I also recommend the E-Track Plastic End Cap, part # ET8730, which helps prevent cargo from catching on the end of the track when installed.

You will want a tie-down that attaches to the E-Track rails. I recommend part # 59131, and also part # E59143. Both of these are designed to easily fit in the track and give you a solid attach point for tie-downs.

I have attached several links to tie-downs that would work well with the E-Track system you can choose from.